+44 (0)1744 762 929
Elpress KRT Copper Cable Lugs (Range 10-1000mm²) - KRT16-10, KRT50-10, KRT95-8

Product overview

Elpress KRT Copper Cable Lugs – for Stranded Cable (Range 10-1000mm²) are produced from electrolytic copper, they have a cable inspection hole and are suitable for stranded cable/ Cu-Conductors (Class 2). Popular Part Numbers: KRT16-10, KRT50-10, KRT95-8

 

General Information

CU-CONNECTIONS
Elpress Cu-connections are produced from electrolytic 99.9% copper. Terminals and Through Connectors exist in a large variety of types for stranded as well as for flexible conductors. C-sleeves for earth conductor branch off also come in a large number of sized. If a standard type is not suitable, we produce tailor-made designs specific to the application.

  • KR/ KRF Terminals and KS/ KSF Connectors may be used for both stranded and flexible conductors.
  • KRD Terminals and KSD Connectors are used for stranded conductors.
  • KRT Terminals and KST Connectors equal the German “Standard types” (not DIN) and are used for stranded conductors.
  • C-Sleeves are used for branch-off or cross connections for mainly earth conductors such as for high lighting protection and earthing grids.

By Crimping Elpress Terminals & Connectors with Elpress Crimp Tools, connections are achieved that meet requirements of SEN 245010, BS 4579:1, VDE 0220:1, EN-IEC 61238:1 whichever is applicable.

MARKING
Elpress marking system for Cu-Connectors shows logotype, conductor area and ID-number for crimp die to be used. This system enables final inspection of proper die use as the die number is automatically imprinted by the die on the crimped barrel.

UL APPROVED
UL is an American standard which is also internationally accepted. Elpress standard Cu Terminals of types KR/ KS, KRF/ KSF. KRT/ KST are UL approved according to no. E205350. Cu Terminals of types KR/ KS, KRF/ KSF are for stranded and flexible copper wires, classes 2 and 5 according to IEC 60228, and have a working area of 1-500mm². Cu Terminals of types KRT/ KST is used for stranded copper wires 10-500mm².

DNV APPROVED
Elpress KRF/ KSF, KRT/ KST Terminals comply with DNV’s rules for the classification of ships and Det Norske Veritas’ Offshore Standrards. The Terminals are approved for installations on ships and mobile offshore units.

For more information on Elpress KRT Copper Cable Lugs (KRT16-10, KRT50-10, KRT95-8), consult PDF File or Technical Data Table  below.

*Technical Data subject to change without notice.

 

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

  • Data: electrolytic copper, tin plated.
  • Cable inspection hole, for stranded (class 2) Cu conductors.
  • UL-approved (KRT 10-500mm²). DNV-approved (KRT 10-400mm²).
AWG Cat no. mm W d N N1 L Pcs/pack Die no. Rec.tool
8 KRT10-5 10 4,5 6 8 29 100 7 V600, V1300
8 KRT10-6 10 4,5 6 8 29 100 7 V600, V1300
8 KRT10-8 10 4,5 8 11 34 100 7 V600, V1300
8 KRT10-10 10 4,5 8 11 34 100 7 V600, V1300
8 KRT10-12 10 4,5 10 14 41 100 7 V600, V1300
6 KRT16-5 12 5,5 6 8 34 100 8,5 V600, V1300
6 KRT16-6 12 5,5 6 8 34 100 8,5 V600, V1300
6 KRT16-8 15 5,5 8 11 39 100 8,5 V600, V1300
6 KRT16-10 16 5,5 8 11 39 100 8,5 V600, V1300
6 KRT16-12 19 5,5 10 15 47 100 8,5 V600, V1300
4 KRT25-6 14 7 9 12 43 100 10 V600, V1300
4 KRT25-8 15 7 9 12 43 100 10 V600, V1300
4 KRT25-10 16 7 9 12 43 100 10 V600, V1300
4 KRT25-12 19 7 12 13 48 100 10 V600, V1300
2 KRT35-6 17 8,5 9,5 11,5 49 100 12 V600, V1300
2 KRT35-8 17 8,5 9,5 11,5 49 100 12 V600, V1300
2 KRT35-10 19 8,5 9,5 11,5 49 100 12 V600, V1300
2 KRT35-12 22 8,5 12 14 53 100 12 V600, V1300
1/0 KRT50-6 20 10 11 12 53 100 14 V600, V1300
1/0 KRT50-8 20 10 11 12 53 100 14 V600, V1300
1/0 KRT50-10 20 10 11 12 53 100 14 V600, V1300
1/0 KRT50-12 22 10 12 14 56 100 14 V600, V1300
2/0 KRT70-8 23 12 11 12 55 100 16 V600, V1300
2/0 KRT70-10 23 12 11 12 55 100 16 V600, V1300
2/0 KRT70-12 23 12 12 14 58 100 16 V600, V1300
4/0 KRT95-8 26 13,5 11 12 60 100 18 V600, V1300
4/0 KRT95-10 26 13,5 11 12 60 100 18 V600, V1300
4/0 KRT95-12 26 13,5 12 14 63 100 18 V600, V1300
4/0 KRT95-16 28 13,5 15 17 69 100 18 V600, V1300
250 KRT120-10 28 15 11 14 64 100 19 V1300, V250
250 KRT120-12 28 15 12 14 64 100 19 V1300, V250
250 KRT120-16 28 15 15 17 70 100 19 V1300, V250
300 KRT150-12 32 17 15 17 76 50 22 V1300, V250
300 KRT150-16 32 17 15 17 76 50 22 V1300, V250
300 KRT150-20 32 17 19 20 83 50 22 V1300, V250
350 KRT185-12 35 19 15 17 79 50 24 V1300, V250
350 KRT185-16 35 19 15 17 79 50 24 V1300, V250
350 KRT185-20 35 19 19 20 86 50 24 V1300, V250
500 KRT240-12 38 21 15 17 86 50 26 V1300, V250
500 KRT240-16 38 21 15 17 86 50 26 V1300, V250
500 KRT240-20 38 21 19 20 93 50 26 V1300, V250
600 KRT300-12 44 24 19 20 100 25 30 V1300, V250
600 KRT300-16 44 24 19 20 100 25 30 V1300, V250
600 KRT300-20 44 24 19 20 100 25 30 V1300, V250
750 KRT400-16 48 26 21 31 114 25 32 V1300, V250
750 KRT400-20 48 26 21 31 114 25 32 V1300, V250
750 KRT400-24 48 26 21 31 114 25 32 V1300, V250
1000 KRT500-00 58 31 70** - 160 - 40 V250
1000 KRT500-16 58 31 25 35 150 - 40 V250
1000 KRT500-20 58 31 25 35 150 - 40 V250
1000 KRT500-24 58 31 25 35 150 - 40 V250
KRT630-00 65 34 70** - 160 - 45 V250
KRT630-20 65 34 25 35 150 - 45 V250
KRT630-24 65 34 25 35 150 - 45 V250
KRT800-00 75 39 80** - 195 - 53 V250
KRT800-24 75 39 35 45 195 - 53 V250
KRT1000-00 80 43 80** - 195 - 56 V1470

Marking example KRT: 70 10 (Elpress logotype included)
70=mm² 10= palm hole for M10
**total palm length

    Make an enquiry