Elpress Mini PVL350 Battery Crimping Tool (6-70 mm²)

Product overview

Elpress Mini PVL350 Battery Crimping Tool (4-95mm²) is a battery-powered tool for crimping tube terminals and through connectors of type KR/ KS/ KRF/ KSF/ KRT/ KST 10-70mm² and KRD/ KSD up to 95mm² with special MB dies. New sleek design with a high performance Li-Ion battery that streamlines your work with its improved battery capacity.

PVL350-WOBC, supplied without battery/ charger.
PVL350-US, supplied with 115 VAC charger.

Elpress Mini PVL350 Benefits

  • Single-handed operation for easy control of all tool functions
  • Slim fitting crimping head ideal for confined spaces
  • High-performance 10.8 V Li-Ion battery with indication of charge status
  • Very good accessibility and ergonomics
  • Opening, rotatable “flip-top” head for easy die changes and slim crimp head for good accessibility
  • Rapic crimp sequence (3-4 seconds)
  • Approximately 100-180 crimps/ battery charges (depending on temperature, frequency, etc)
  • Easy and comfortable to use with one hand thanks to its ergonomic 2-component housing with grip-friendly protection
  • Elpress Mini PVL350 Battery Crimping Tool (6-70mm²) is extremely lightweight and offers rapid crimping process for maximum efficiency
  • Automatic return of the dies when crimping is completed

Elpress PVL350 Technical Data

  • Crimping force: max 35 kN
  • Crimping range: 4-95 mm2
  • Crimping process: about 3-4 s (dependent on material)
  • Number of crimps: about 180 for 70 mm² Cu
  • Battery voltage: 10.8 V
  • Battery capacity: 1.5 Ah, Li-Ion
  • Charge time: about 40 mins
  • Weight including battery: 1.6 kg
  • Ambient temperature: -10°C to +40°C
  • Mini PVL350 Dimensions: 360 x 116 x 75 mm

General Information

SYSTEM ELPRESS
System Elpress consists of terminals and tools, designed and tested together to give a certified crimping result. This ensures that users will feel confident when using our systems. It also ensures the achievement of a secure connection through the proper handling of our products.

HYDRAULIC CRIMP SYSTEMS
Elpress hydraulic crimp systems crimp from 10 to 1200 mm². The systems consist of pumps and crimp heads that can be freely combined or with complete hand-held tools, where these devices are integrated. Wide range of accessories available for crimping, pre-rounding, cutting etc. Together with the matching terminals, they form  a complete system. Both pumps and hand-held tools have, with a few exceptions, quick feed function that means crimping can begin after a few pump strokes. The systems have a built-in ratchet lock that ensures the completion of the initial crimp and thus, produces results with the best characteristics. Pumps can connect to the different crimp heads providing the option of comfortable work in difficult situations and with maximum flexibility.

Systems for Crimping Cu & Al Terminals

CU TERMINALS
The V1300 System is suitable for crimping Cu Terminals 10-400mm2. An open-head C version is also available for better access in confined spaces.
The V250 System is suitable for crimping Cu Terminals 10-800mm2.

AL TERMINALS
The V1300 System is suitable for the indent crimping of Al Terminals and pre-rounding of Al Conductors 16-240mm2. Round crimping is carried out on sector-shaped Al Conductors.
The V250 System is suitable for indent crimping Al Terminals and pre-rounding Al Conductors 16-630mm2. Round crimping is carried out on sector-shaped Al Conductors.

For more information on Elpress Mini PVL350 Battery Crimping Tool (Cu 4-95mm²), consult PDF File or Technical Data Table below. PVL350-WOBC, PVL350-US

*Technical Data subject to change without notice. PVL350-WOBC, PVL350-US

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Cat. No. KRD/KSD
Area mm²
KRT/KST
Area mm²
KR/KS, KRF/KSF
Area mm²
CU KRF/KSF mm² C sleeves mm² Net Weight kg L x W x H mm Crimping Geometry Temp °C
Elpress PVL350 4-95 4-95 4-70 4-95 12-50 1,6 360 x 116 x 75 hexagonal, oval -10 +40

CRIMP DIES FOR PVL350 (KR/ KRF/ KS/ KS/ KSF, CUT, C-SLEEVES)

Supplied in pairs.
For hexagonal crimping of Cu 4-70mm2 (Class 2, 5 and 6) Conductors according to IEC 60228, CUT sleeves 6-16mm2 crimped with MB4016. C- Sleeves 6-25mm2 are crimped with MBC5 and MBC6.
Through Conductor mm2 Branching mm2 KR/ KS, KRF/ KSF mm2 Name Number of Crimps Net Weight (kg)
- - 10 MB8 1 0,086
- - 16 MB9 2 0,085
- - 25 MB11 2 0,083
- - 35 MB13 2 0,081
- - 50 MB14,5 2 0,080
- - 70 MB17 3 0,075
- - 4-10, CUT 6-16 MB4016 1 0,082
6-16 6-16 - MBC5 2 0,110
5-25 5-25 - MBC6 2 0,110

CRIMP DIES FOR PVL350 (KRT/ KST)

Supplied in pairs.
For hexagonal crimping of Cu (Class 2) 10-70mm2.
KRT/ KST mm2 Name Number of Crimps Net Weight (kg)
10 MB7 1 0,088
16 MB8,5 1 0,087
25 MB10 2 0,084
35 MB12 2 0,083
50 MB14 3 0,080
70 MB16 3 0,075

 

CRIMP DIES FOR PVL350 (KRD/ KSD)

Supplied in pairs.
For hexagonal crimping of Cu (Class 2) 10-95mm2.
KRD/ KSD mm2 Name Number of Crimps Net Weight (kg)
10/ 16 MB8 1 0,086
25 MB9 2 0,085
35 MB11 2 0,083
50 MB12 2 0,083
70 MB14 3 0,080
95 MB17 3 0,075

 

Find out more about our products or becoming a supplier