+44 (0)1744 762 929
Prysmian BICON Universal Cable Jointing Kits - JSTCC Series (Low Voltage) (JST6CC, JST16CC, JST35CC, JST95CC, JST185CC, JST300CC)

Product overview

Prysmian BICON Universal Cable Jointing Kits – JSTCC Series (Low Voltage)
(JST6CC, JST16CC, JST35CC, JST95CC, JST185CC, JST300CC)

Straight joints for LV cables with copper and aluminium conductors from 1.5mm² to 300mm², including hazard free easy flow JEM resin and simple to use mechanical connectors.

Prysmian’s cast resin Universal Straight (JSTCC) cable joints are the ideal method for joining today’s polymeric industrial cables. The Low Voltage Cable Jointing Kits are designed around transparent vacuum moulded shells which offer the installer greater working dimensions, plus a specially designed flange sealing system. Two part easy flow JEM Resin is provided as standard, suitably packed in a clear laminate sachets offering a completely enclosed and visible resin mixing system.

Part Numbers: JST6CC, JST16CC, JST35CC, JST95CC, JST185CC, JST300CC

 

Features

  • Low Hazard Isocynate free JEM resin
    – Twin Pack mixing in clear laminate sachets
    – Extremely low viscosity combined with enhanced adhesion
  • Transparent vacuum formed shells which offer greater working dimensions & interlocking flange seals.
  • Mechanical Connectors that need no special tools whilst allowing good conductor range take.

 

Technical Data

  • Low Voltage Straight Joints for 600/1000 Volt SWA cables to BS5467, BS6346 and IEC 502 – with Polymeric Insulation, aluminium or copper conductors.
  • Tested and approved to BS EN 50393 & ENA ER C81
  • Includes Mechanical connectors (4 cores) requiring no special tooling and constant force spring Armour Bonds.
  • JEM Resin
    – Easier mixing in “Twin Pack” totally enclosed mixing in a clear laminate sachet.
    – Extremely low mix viscosity allows void free joint filling.
    – JEM Resin is insensitive to moisture and will cure under water.
    – Enhanced adhesion to XLPE, MDPE, PVC & lead.
    – High flash point, non-flammable liquid – No special storage or transport requirements.
    – Not classified as irritating to the skin or eyes.
    – Does not cause skin sensitization.

 

Prysmian BICON Cable Joints

For many years, BICON has been in the forefront of jointing technology, from designs using bituminous filling compounds, to the development of the highly successful BICAST acrylic resin jointing system.

Most recently , we have supplemented these ranges with heat shrink and pre-moulded products (BIMOLD) and can now offer a unique package to satisfy all requirements.

All four systems are available at voltages up to or above 33 kV and, depending on application, each may offer benefits over the others.

For instance, termination of high voltage polymeric cables requiring the facility to disconnect or add in additional cables at a later stage, means that BIMOLD is the logical choice. Likewise, BICAST provides a fast, comprehensive jointing method with a versatile range covering low and high voltage and all cable types.

Download PDF file for Prysmian BICON Universal Cable Jointing Kits – JSTCC Series (JST6CC, JST16CC, JST35CC, JST95CC, JST185CC, JST300CC) Technical Data.

*Technical Data subject to change without notice.

 

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

    Make an enquiry