Prysmian BICON Single Way Telcleat 385AA Series Telecleat (SWA Cable Cleat)

Product overview

Prysmian BICON Single Way Telcleat 385AA Series (Low Density Polythene) is a single piece cleat which provides protection against all weather conditions and simple installation on a one-piece, single fixing design (also known as Telcleats or SWA Cable Cleats).
Part Numbers: 385AA01, 385AA02, 385AA03, 385AA04, 385AA05, 385AA06, 385AA07, 385AA08

TELCLEAT FEATURES & BENEFITS

  • Suitable for use with cable diameters 10mm to 51mm.
  • Manufactured from Low Density Polythene.
  • Overlapping self-adjusting ranges.
  • Sunlight (UV) and weather resistant.
  • One-piece, single fixing design.
  • Can be double stacked on a single fixing.
  • Operating temperature -40ºC to +60ºC.
  • Prysmian BICON Single Way Telcleat (SWA Cable Cleat) is tested in accordance with BS EN 50368.
  • Part Numbers: 385AA01, 385AA02, 385AA03, 385AA04, 385AA05, 385AA06, 385AA07, 385AA08

 

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Design Number Cable Diameter A (mm) Min Cable Diameter A (mm) Max Standard Pack Quantities Dimensions (mm) B Min Dimensions (mm) B Max Dimensions (mm) C Max Dimensions (mm) D Weight (g) Roundhead Woodscrew masonry, concrete or wood ins X No Screw Bolt for Cable Tray mm
385AA01 10.5 14.5 100 15 18 32 12 2.3 1 1/4 x 8 M4 x 30
385AA02 12.2 16.7 100 17 22 36 14 3.4 1 1/2 x 8 M4 x 35
385AA03 14.6 19.8 100 21 26 36 14 3.4 1 1/2 x 8 M4 x 40
385AA04 17.7 24.0 50 25 31 51 18 8.6 2 x 8 M4 x 45
385AA05 21.7 28.5 25 30 37 57 20 12.4 2 1/4 x 12 M6 x 50
385AA06 26.2 34.2 25 35 43 65 22 16.4 2 1/2 x 12 M6 x 60
385AA07 31.9 41.6 10 42 52 78 25 24 2 3/4 x 12 M6 x 70
385AA08 39.3 51.1 10 50 62 91 26 35 3 1/4 x 12 M6 x 80

Performance Data

Test Standard EN 50368:2003
Type 6.12 Non-Metallic
Impact Resistance 6.2.4 Heavy -> 6.2.5 V.Heavy
Lateral Load 0.188 -> 0.775 kN
Axial Load 0.046 -> 1.118 kN
Needle Flame  >60 secs
Telcleat-385-Series-Single-Way-Cleat-Diagram

Method Of Fixing

This single way cleat is opened and placed around the cable so that the end of the cleat containing the slot will be in contact with the mounting surface, except for the 385AA01, which should be be reversed to put the slot uppermost. In this case an M5 washer should be used to prevent the nut entering the slot of the cable cleat. When mounting directly on channel section an adaptor plate should be used.

*Technical information subject to change without notice

Find out more about our products or becoming a supplier