CCG D1W Captive Component Industrial Cable Gland

Product overview

CCG D1W Captive Component Cable Gland

CCG D1W Captive Component Gland is an Industrial Cable Gland Device with sealing on inner sheath, used to connect and secure Steel Wire Armoured (SWA) and Aluminium Armoured Cable to major equipment. For indoor and outdoor use when fitted with a shroud.

CCG D1W Part Numbers: 052000-16, 052000, 0520-0, 052001, 052002, 052003, 052004, 052005, 052006, 052007, 052008, 052009, 052010, 052011, 052012, 052013

Features & Benefits

  • For indoor and outdoor use when fitted with a shroud.
  • Two-piece handling, no loose parts.
  • Freely rotating captive cone and inspectible cone ring, providing an armour clamp and earth bond without twisting the armour wire.
  • Factory fitted captive elastomeric inner seal for ingress protection IP66/68.
  • Seals on the inner sheath of the cable.
  • Precision manufactured from high-quality brass (nickel plated) available in aluminium on request.
  • Complete with thread sealing gasket and heavy duty locknut.

CCG D1W Technical Data

Type: D1W Industrial Gland
Gland Material: Brass (Nickel Plated) BS 2874, EN 12164, Aluminium ASTM B221
Seal Material: Thermoset Elastomer or Silicone on request
Cable Type: Steel Wire Armour and Aluminium Armour Wire
Armour Clamping: Rotating Captive Cone and Inspectible Cone Ring
Sealing Area: Inner Sheath
Optional Accessories: Adaptor, Reducer, Earth Tag, Locknut, Serrated Washer and Shroud

Installation Standards

  • AS/NZS 3000
  • BS 6121-5
  • BS 7671
  • BS 7430
  • IEC 60364-5-54
  • SANS 0142

Additional Technical Data of CCG D1W Captive Component Cable Gland part numbers can be found on the table below. For Standards, Certifications & Fitting Instructions, please advise PDF Files.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Product Code Gland Size Ref.  Metric Entry Thread (C) Metric Entry Thread (Min D) NPT Entry Thread (C) NPT Entry Thread (Min D) Cable Detail (Min A) Cable Detail (Max A) Cable Detail (Max B) Max Length (E) Armour Dia
(Min F)
Armour Dia
(Max F)
Hexagonal Detail
(Max Flats)
Hexagonal Detail
(Max Crns)
Installation Torque Value (Nm)
052000-16 00-16ss M16 x 1.5 10 - - 3.0 8.5 13.5 32.0 0.90 0.90 ♠♥ 24 ♥ 27 35.0
052000 00-20ss M20 x 1.5 10 ½ 15 3.0 8.5 13.5 32.0 0.90 0.90 ♠♥ 24 ♥ 27 35.0
0520-0 0-20s M20 x 1.5 10 ½ 15 8.0 12.0 16.0 32.0 0.90 1.25 ♠♥ 24 ♥ 27 35.0
052001 1-20 M20 x 1.5 10 ½/¾ 15 11.5 15.0 20.5 32.0 0.90 1.25 ♠ 27 30 35.0
052002 2-25 M25 x 1.5 10 ¾/1 15/19 15.0 20.0 26.5 35.0 1.25 1.60 ♠ 35 39 50.0
052003 3-32 M32 x 1.5 10 1/1¼ 19 20.0 26.5 33.5 35.0 1.60 2.00 ♠ 42 47 70.0
052004 4-40 M40 x 1.5 15 1¼/1½ 19/21 26.0 34.0 42.5 50.0 1.60 2.00 ♠ 52 59 90.0
052005 5-50 M50 x 1.5 15 1½/2 21 34.0 44.5 52.5 53.0 2.00 2.50 ♠ 65 73 100.0
052006 6-63 M63 x 1.5 15 2/2½ 21/30 44.0 56.5 65.5 70.0 2.00 2.50 ♠ 80 90 120.0
052007 7-75 M75 x 1.5 15 2½/3 30/32 56.0 67.5 78.0 78.0 2.50 3.15 ♠ 96 108 120.0
052008 8-80 M80 x 2.0 20 3 32 68.0 74.0 82.0 78.0 2.50 3.15 ♠ 96 108 120.0
052009 9-90 M90 x 2.0 20 3/3½ 32/33 74.0 81.5 91.0 83.0 3.00 3.50 ♠ 111 125 120.0
052010 10-100 M100 x 2.0 20 3½/4 33/34 81.0 90.0 100.0 88.0 3.00 3.50 - - 120.0
052011 11-110 M110 x 2.0 20 4 34 86.0 98.0 114.0 92.0 3.00 4.00 - - 120.0
052012 12-120 M120 x 2.0 20 - - 95.0 103.0 118.0 96.0 3.00 4.00 - - 120.0
052013 13-130 M130 x 2.0 20 - - 100.0 115.0 124.0 100.0 3.00 4.00 - - 120.0

All dimensions are in mm (apart from NPT).

♠ : For use with a CCG Hex Spanner.

♥ : When manufactured in Aluminium, Hex will be 27 Across Flats and 30 Across Corners.

CCG D1W Captive Component Cable Gland Diagram

 

Find out more about our products or becoming a supplier