CCG E1W Integral Earth Captive Component Industrial Cable Gland

Product overview

CCG E1W Integral Earth Captive Component Cable Gland

CCG E1W Integral Earth Captive Component Cable Gland is a Protective Earth Industrial Cable Gland Device with Dual Seal, designed for Steel Wire Armoured (SWA) and Aluminium Armoured Cable. For indoor and outdoor use.

E1W Integral Earth Part Numbers: 051800-16-IE, 051800-IE, 0518-0-IE, 051801-IE, 051802-IE, 051803-IE, 051804-IE, 051805-IE, 051806-IE, 051807-IE, 051808-IE, 051809-IE, 051810-IE

Features & Benefits

  • For indoor and outdoor use.
  • Includes an integral earth connection for HV system circuits where high earth fault currents may be experienced.
  • Two piece handling, no loose parts.
  • Freely rotating captive cone and inspectible cone ring, providing an armour clamp and earth bond without twisting the armouring.
  • Patented disconnect armoured clamp system for ease of inspection
  • Provides a seal on the inner and outer sheath of the cable sealing to IP66/68.
  • Precision manufactured from high quality brass (nickel plated) available in aluminium or stainless steel 316/316L on request.
  • Complete with earthing stud, bolt and thread sealing gasket and heavy duty locknut.

CCG E1W Integral Earth Technical Data

Type: E1W Protective Earth Industrial Cable Gland
Gland Material: Brass (Nickel Plated), BS 2874, EN 12164, Aluminium, Stainless Steel 316/316L
Seal Material: Thermoset Elastomer or Silicone on request
Cable Type: Steel Wire Armour and Aluminium Armour Wire
Armour Clamping: Rotating Captive Cone and Inspectible Cone Ring
Sealing Area: Inner Sheath and Outer Sheath
Optional Accessories: Adaptor, Reducer, Locknut, Serrated Washer and Shroud

Installation Standards

  • AS/NZS 3000
  • BS 6121-5
  • BS 7671
  • BS 7430
  • IEC 60364-5-54
  • SANS 0142

Additional Technical Data of CCG E1W Integral Earth Captive Component Cable Gland part numbers can be found on the table below. For Standards, Certifications & Fitting Instructions, please advise PDF Files.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Product Code Gland
Size
Ref.
 
Metric
Entry
Thread
(C)
Metric
Entry
Thread
(Min D)
NPT
Entry
Thread
(C)
NPT
Entry
Thread
(Min D)
Cable
Detail
(Min A)
Cable
Detail
(Max A)
Cable
Detail
(Min B)
Cable
Detail
(Max B)
Max
Length
(E)
Armour
Dia
(Min F)
Armour Dia
(Max F)
Hex. Detail
(Flats J)
Hex. Detail
(Crns J)
Hex. Detail
(Flats K)
Hex. Detail
(Crns K)
Max
Thick. (H)
Earth Bolt (L) Install. Torque
Value (Nm)
051800-16-IE* 00-16ss M16x1.5 10 - - 3 8.5 8.0 13.5 61 - 0.9 24 27 24 27 15 Μ6/Μ8 35
051800-IE* 00-20ss M20x1.5 10 ½/¾ 15 3 8.5 8.0 13.5 61 - 0.9 24 27 24 27 15 Μ6/Μ8 35
0518-0-IE* 0-20s M20x1.5 10 ½/¾ 15 7 12.0 11.5 16.0 61 0.9 1.25 27 30 24 27 15 Μ6/Μ8 35
051801-IE* 1-20 M20x1.5 10 ½/¾ 15 9 15.0 16.0 20.5 67 0.9 1.25 27 30 27 30 15 Μ6/Μ8 35
051802-IE 2-25 M25x1.5 10 ¾/1 15/19 14 20.0 20.5 26.5 80 1.25 1.6 42 47 35 39 15 Μ8/Μ10 50
051803-IE 3-32 M32x1.5 10 1/1¼ 19 19 26.5 26.5 33.5 80 1.6 2.0 50 56 42 47 15 Μ12 70
051804-IE 4-40 M40x1.5 15 1¼/1½ 19/21 26 34.0 33.5 42.5 85 1.6 2.0 52 59 52 59 15 Μ12 90
051805-IE 5-50 M50x1.5 15 1½/2 21 34 44.5 42.5 52.5 106 2.0 2.5 65 73 65 73 20 Μ12 100
051806-IE 6-63 M63x1.5 15 2/2½ 21/30 44 56.5 52.5 65.5 129 2.0 2.5 80 90 80 90 22 Μ12 120
051807-IE 7-75 M75x1.5 15 2½/3 30/32 56 67.5 65.5 78.0 149 2.5 3.15 111 125 96 108 25 Μ12 120
051808-IE 8-80 M80x2.0 20 3 32 68 74.0 78.0 82.0 149 2.5 3.15 111 125 96 108 25 Μ12 120
051809-IE 9-90 M90x2.0 20 3/3½ 32/33 74 74.0 82.0 91.0 157 3.0 3.5 111 125 96 108 25 Μ12 120
051810-IE 10-100 M100x2.0 20 3½/4 33/34 81 91.0 90.0 100.0 165 3.0 3.5 125 141 125 141 25 Μ12 120

All dimensions are in mm (apart from NPT).

* : Customers to specify M6 or M8.

♥ : When manufactured in Aluminium, Hex will be 27 Across Flats and 30 Across Corners.

CCG E1W Integral Earth Captive Component Industrial Cable Gland Diagram

 

Find out more about our products or becoming a supplier