CCG VARITEx Compression Cable Gland (Ex eb IIC, Ex tb IIIC)

Product overview

CCG VARITEx Compression Cable Gland (Ex eb IIC, Ex tb IIIC)

CCG VARITEx EMC Compression Cable Gland (Ex eb IIC, Ex tb IIIC) is an Industrial Cable Gland Device, suitable for Copper Tape Cable used for VSD. For indoors, outdoors, Group II, III, Zone 1, 2, 21 and 22 hazardous areas.

CCG VARITEx Part Numbers: 0531-0S, 0531-0, 053101, 053122, 053102, 053133, 053103, 053144, 053104, 053155, 053105, 053166, 053106, 053106L, 053107, 053108

Features & Benefits

  • For indoors, outdoors, Group II, III, Zone 1, 2, 21 and 22 hazardous areas.
  • Two piece handling, no loose parts.
  • Independent tightening of coil induces an inspectable positive contact on copper tape.
  • Factory fitted captive elastomeric seal for Built-in Safety™.
  • Seals on the outer sheath of the cable to IP66/68.
  • Precision manufactured from high-quality brass (Marine Grade Electroless Nickel Plated™) available in stainless steel 316/316L on request.
  • Complete with a thread sealing gasket and heavy duty locknut.

CCG VARITEx Technical Data

Type: VARITEx Industrial Gland
Gland Material: Brass (Marine Grade Electroless Nickel PlatedTM), Stainless Steel 316/316L
Seal Material: Standard Thermoset Elastomer or Extreme Temperature Seals
Seal Gasket Material: HDPE, Nylon 66 or PTFE
Cable Type: Copper Tape VSD (Variable Speed Drive)
Sealing Area: Compression Seal on the Outer Sheath
Optional Accessories: Adaptor, Reducer, Earth Tag, Locknut, Serrated Washer and Shroud
Note: The installer should ensure that the materials are suitable for the installation environment.

Conditions for Safe Use – X

  • The cable glands shall only be used where the temperature, at the point of entry, is between -60°C and +95°C (standard seal & HDPE sealing gasket), +100°C (standard seal and Nylon sealing gasket) or +160°C (extreme temp. seal & PTFE sealing gasket) depending on seal and gasket used.
  • The cable glands may only be used on fixed installations where the cable is clamped or stress applied to the cable in the gland is prevented.

Additional Technical Data of CCG VARITEx EMC Compression Industrial Cable Gland part numbers can be found on the table below. For Standards, Certifications & Fitting Instructions, please advise PDF Files.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Product Code Cable
Conductor
Size
Gland Size Ref.  Metric Entry Thread (C) Metric Entry Thread (Min D) Cable Detail
Inner
(Min A)

Cable Detail
Outer
(Max A)
Cable Detail (Min B) Cable Detail (Max B) Max Length (E) Hexagonal Detail
(Max Flats)
Hexagonal Detail
(Max Crns)
Installation Torque Value (Nm)
0531-0S 2.5 0-20s M20x1.5 15 9.6 11.5 13 20 61 30 34 23.1
0531-0 4 0-20 M20x1.5 15 10.8 12.5 13 20 61 30 34 23.1
053101 6 1-20 M20x1.5 15 12.2 14 13 20 61 30 34 23.1
053122 10 2s-25s M25x1.5 15 13.8 16 18 26 64 38 43 33
053102 16 2-25 M25x1.5 15 16 20 18 26 65 38 43 33
053133 25 3s-32s M32x1.5 15 20 23 23 28 68 45 51 46.2
053103 35 3-32 M32x1.5 15 22 23.5 23 28 68 45 51 46.2
053144 50 4s-40s M40x1.5 17 23.5 28 28 39.5 75 55 62 57.2
053104 70 4-40 M40x1.5 17 28 32 28 39.5 74 55 62 57.2
053155 95 5s-50s M50x1.5 17 32 36 35.2 42 81 65 73 62.7
053105 120 5-50 M50x1.5 17 35.5 39 40 46 85 65 73 62.7
053166 150 6s-63s M63x1.5 17 39 45 45.5 54 85 80 90 72.6
053106 185 6-63 M63x1.5 17 44 49.5 45.5 54 85 80 90 72.6
053106L 240 6L-63L M63x1.5 17 49 54 54.6 62 83 80 90 72.6
053107 300 7-75 M75x1.5 17 54 59 59 72.1 93 96 108 72
053108 300 8-80 M80x2.0 17 59 64 65 77.5 93 96 108 72

All dimensions are in mm. Intermediate thread sizes are available on request.

CCG VARITEx EMC Captive Component Cable Gland Diagram

 

Find out more about our products or becoming a supplier