Nexans Euromold 180A-24P-O In-Air Bushing
Product overview
Nexans Euromold 180A-24P-O In-Air Bushing
Nexans Euromold 180A-24P-O In-Air Bushings for use in equipment insulated with air, typically for dry type transformers, motors, switchgear, capacitors that are specified to terminate and connect medium/high voltage cables in the following voltage classes:
- 6/10 (12kV)
- 6.35/11 (12kV)
- 8.7/15 (17.5kV)
- 12/20 (24kV)
- 12.7/22 (24kV)
Technical Characteristics
- Each bushing is tested for AC withstand and partial discharge prior to leaving the factory.
- The plug-in type equipment bushings are moulded epoxy insulated parts and meet the requirements of CENELEC EN 50180, IEC 60071 and IEC 60137.
Specification & Design
To order the equipment bushing, specify the type. The bushings can be supplied with an earth jumper. T include the ring clamp, add:
- /B, if per British Standards
- /D, if per German Standards
- /F, if per French Standards, e.g. 180A-24P-O/F
| Euromold Equipment Bushing Type |
Voltage Um |
Current Ir |
| 180A-24P-O | 12 or 24 kV | 250 Amps |
Nexans Euromold 180A-24P-O Fixings for Bushings
For Ordering Instructions and Part Number Selection Table of Nexans Euromold 180A-24P-O In-Air Bushings, please refer to the Technical Data Table Below. For additional General and Technical Information, download PDF File.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
Interested in this Product?
+44 (0)1744 762 929Technical Data
|
ORDERING INSTRUCTIONS To order the equipment bushing, specify the type. The bushings are supplied with an earth jumper. T include the ring clamp, add:
|
| EQUIPMENT BUSHING TYPE | VOLTAGE Um |
CURRENT Ir |
CREEPAGE DISTANCE A-B |
| 180A-24P-O | 12 or 24 kV | 250 Amps | 630 mm |