Nexans Euromold Interface A Accessories
Product overview
Nexans Euromold Interface A Accessories
Nexans Euromold Interface A Accessories suitable for use with connectors and bushings with an Interface, as described by Cenelec EN 50180 and 50181.
Euromold Part Numbers: 150DR, 150DP, 151SOP, 250GP, 200T, 200X, K150S, 1501J3-U-8, Kit MT.
Voltage classes:
- 6/10 (12kV)
- 6.35/11 (12kV)
- 8.7/15 (17.5kV)
- 12/20 (24kV)
- 12.7/22 (24kV)
Technical Characteristics
- All Euromold Interface A Accessories, except the earthing plug, are tested for AC withstand and partial discharge prior to leaving the factory.
Nexans Euromold Interface A Accessories
 |
150DR Dead-End ReceptacleEuromold 150DR Dead-End Receptacle fits over a bushing with a type A interface to provide ‘dead-end’ facility. Renders the assembly watertight. Order 150DR for 12 kV or K150DR for 24 kV applications. The dead-end receptacle can be supplied with an earth lead. Order: -/G. E.g. K150DR/G. |
|
|
|
 |
150DP Dead-End PlugEuromold 150DP Dead-End Plug plugs into connectors or receptacles to provide ‘dead-end’ facility. Renders the assembly watertight. Order 150DP for 12 kV or K150DP for 24 kV applications. |
|
|
|
 |
151SOP Stand-off PlugEuromold 151SOP Stand-off Plug is designed to support and ‘dead-end’ connectors with a type A interface when removed from equipment. Order 151SOP for 12 kV or K151SOP for 24 kV applications. |
|
|
|
 |
250GP Earthing PlugEuromold 250GP Earthing Plug is designed to support and earth connectors with a type A interface when removed from equipment. Order 250GP for 12 kV or 24 kV applications. |
|
|
|
 |
200T Separable Tee ConnectorEuromold 200T Separable Tee Connector is designed to connect three cables of the same or varying sizes or two cables to equipment. For an adapted bail, please refer to the catalogue or contact our representative. Order 200T for 12 kV or K200T for 24 kV applications. |
|
|
|
 |
200X Separable Cross ConnectorEuromold 200X Separable Cross Connector is designed to connect four cables of the same or varying sizes or three cables to equipment. For an adapted bail, please refer to the catalogue or contact our representative. Order 200X for 12 kV or K200X for 24 kV applications. |
|
|
|
 |
K150S In-Line JunctionEuromold K150S In-Line Junction is designed to connect two cables of the same or varying sizes. For an adapted bail, please refer to the catalogue or contact our representative. Order K150S for 12 kV or 24 kV applications. |
|
|
|
 |
1501J3-U-8 Three-Way JunctionEuromold 1501J3-U-8 Three-Way Junction provides a flexible means of connecting two or three cables of the same or varying sizes. For an adapted bail, please refer to the catalogue or contact our representative. Order 1501J3-U-8 for 12 kV or K1501J3-U-8 for 24 kV applications. |
|
|
|
 |
Kit MT Earthing Kit for Cu Tape Screened CablesMT Earthing Kit for Cu Tape Screened Cables contains a tinned copper braid (25 mm² – L=500 mm), a tinned copper wire for cleating and water sealing mastic. Order Kit MT for 12 kV or 24 kV applications. |
|
|
|
For additional General and Technical Information, download PDF File.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929