CCG A2F-H-R Compression Cable Gland (0497)
CCG A2F-H-R Compression Cable Gland (0497)

Product overview

CCG A2F-H-R Compression Cable Gland (0497)

CCG A2F-H-R Compression Cable Gland (0497) is a Hazardous Area Glanding Device for Unarmoured Cable. Suitable for Group I, II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.

CCG Part Numbers: 049700-16S, 049700-16, 049700, 0497-0-16, 0497-0, 049701, 049722, 049702, 049733, 049703, 049744, 049704, 049755, 049705, 049766, 049706, 049777, 049707.

Features & Benefits

  • For Group I, II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.
  • Fitted with two specially formulated elastomeric displacement seals, for dual redundancy and superior cable retention, explosion protection and IP rating.
  • A hose tail provides for clamping a protective hose over the cable.
  • Precision manufactured from high-quality brass (Marine Grade Electroless Nickel Plated™) available in stainless steel 316/316L on request.
  • Supplied with a thread sealing gasket (parallel threads only).

CCG A2F-H-R Technical Data

Type: A2F-H-R
Equipment Protection Levels: Ex db I/IIC, Ex eb I/IIC, Ex ta IIIC, Ex nR IIC
Gland Material: Brass (Marine Grade Electroless Nickel Plated™), Stainless Steel 316/316L
Seal Material: Standard Thermoset Elastomer or Extreme Temperature Seals
Sealing Gasket Material: HDPE, Nylon 66 or PTFE
Cable Type: Unarmoured
Sealing Area: Outer Sheath
Optional Accessories: Adaptor, Reducer, Earth Tag, Locknut, Serrated Washer and Shroud

Note: The installer should ensure that the materials are suitable for the installation environment.

Installation Standards

  • IEC/BS EN
  • IECEx
  • ATEX
  • UKEX
  • INMETRO (Brazil)
  • TR CU (Russia)
  • CCC/CNEx (China)
  • SANS
  • Ingress Protection
  • Deluge Protection
  • Corrosion Protection

Hazardous Areas

A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such locations are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.

Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.

Additional Technical Data on CCG A2F-H-R Compression Cable Gland (0497) Part Numbers can be found on the table below. For Conforming Standards & Certificates as well as Fitting Instructions, please advise PDF File.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Product Code Gland Size Ref. Metric Entry Thread (C) Metric Entry Thread (Min D) NPT Entry Thread (C) NPT Entry Thread (Min D) Cable Detail (Min A) Cable Detail (Max A) Max Length (E) Spigot/ Hose Tail (B) Hexagonal Detail
(Max Flats)		 Hexagonal Detail
(Max Crns)		 Installation Torque Value (Nm)
049700-16S 00s-16S M16 x 1.5 15 - - 1 4 43 16/19 24 27 32.5
049700-16 00-16ss M16 x 1.5 15 - - 3 8.5 43 16/19 24 27 32.5
049700 00-20ss M20 x 1.5 15 ½/¾ 15 3 8.5 43 16/19 24 27 32.5
0497-0-16 00-16s M16 x 1.5 15 ½/¾ 15 7 10.5 43 16/19 24 27 32.5
0497-0 0-20s M20 x 1.5 15 ½/¾ 15 7 12 43 16/19 24 27 32.5
049701 1-20 M20 x 1.5 15 ½/¾ 15 11 15 50 17.5/19 27 30 32.5
049722 2s-25s M25 x 1.5 15 ¾/1 15/19 11.5 17.5 55.5 25.4 35 39 47.5
049702 2-25 M25 x 1.5 15 ¾/1 15/19 15 20 55.5 25.4 35 39 47.5
049733 3s-32s M32 x 1.5 15 1/1¼ 19 16 22 66 31.8 42 47 55
049703 3-32 M32 x 1.5 15 1/1¼ 19 20 26.5 66 31.8 42 47 55
049744 4s-40s M40 x 1.5 15 1¼/1½ 19/21 22 31.5 80 38.1 52 59 65
049704 4-40 M40 x 1.5 15 1¼/1½ 19/21 26 34 80 38.1 52 59 65
049755 5s-50s M50 x 1.5 15 1½/2 21 29 38 99 50.8 65 73 82.5
049705 5-50 M50 x 1.5 15 1½/2 21 34 44.5 99 50.8 65 73 82.5
049766 6s-63s M63 x 1.5 15 2/2½ 21/30 38 50 121 63.5 80 90 97.5
049706 6-63 M63 x 1.5 15 2/2½ 21/30 44.5 56.5 121 63.5 80 90 97.5
049777 7s-75s M75 x 1.5 15 2½/3 30/32 50 62 141 76 96 108 115.5
049707 7-75 M75 x 1.5 15 2½/3 30/32 56 67.5 141 76 96 108 115.5

All dimensions except NPT are in mm. Intermediate thread sizes are available on request. NPT threads should be tightened ‘wrench tight’.

 

 

Find out more about our products or becoming a supplier