CCG FLP Captive Component Cable Gland (0521)
CCG FLP Captive Component Cable Gland (0521)

Product overview

CCG FLP Captive Component Cable Gland (0521)

CCG FLP Captive Component Cable Gland (0521) is a Hazardous Area Glanding Device for Steel Wire Armoured Cable. Suitable for Group I underground mines, Group II, III, Zone 1, 2, 21 and 22 hazardous areas.

CCG Part Numbers: 052100-16, 052100, 0521-0, 052101, 052102, 052103, 052104, 052155, 052105, 052166, 052106, 052107

Features & Benefits

  • For Group I underground mines, Group II, III, Zone 1, 2, 21 and 22 hazardous areas.
  • Two-part handling, freely rotating captive cone and inspectible cone ring provides an armour clamp and earth bond on the steel wire armour.
  • Factory fitted with a specially formulated elastomeric seal, providing Built-in Safety™.
  • No loose parts that can get lost.
  • Precision manufactured from high-quality brass (Marine Grade Electroless Nickel Plated™) available in stainless steel 316/316L on request.
  • Supplied with a thread sealing gasket (parallel threads only).

CCG FLP Technical Data

Type: FLP
Equipment Protection Levels: Ex db I/IIC, Ex eb I/IIC, Ex ta IIIC, Ex nR IIC
Gland Material: Brass (Marine Grade Electroless Nickel Plated™), Stainless Steel 316/316L
Seal Material: Standard Thermoset Elastomer or Extreme Temperature Seals
Sealing Gasket Material: HDPE, Nylon 66 or PTFE
Cable Type: Steel Wire Armour
Armour Clamping: Captive Rotating Cone and Inspectible Cone Ring
Sealing Area: Inner Sheath
Optional Accessories: Adaptor, Reducer and Shroud

Note: The installer should ensure that the materials are suitable for the installation environment.

Installation Standards

  • IEC/BS EN
  • IECEx
  • ATEX
  • UKEX
  • INMETRO (Brazil)
  • TR CU (Russia)
  • SANS
  • Ingress Protection
  • Deluge Protection
  • Corrosion Protection
  • Marine ABS
  • DNV-GL
  • EMC Compatible

Hazardous Areas

A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such locations are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.

Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.

Additional Technical Data on CCG FLP Captive Component Cable Gland (0521) Part Numbers can be found on the table below. For Conforming Standards & Certificates as well as Fitting Instructions, please advise PDF File.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Product Code Gland Size Ref. Metric Entry Thread (C) Metric Entry Thread (Min D) NPT Entry Thread (C) NPT Entry Thread (Min D) Cable Detail (Min A) Cable Detail (Max A) Cable Detail (Max B) Max Length (E) Armour Dia (Min F) Armour Dia (Max F) Hexagonal Detail (Max Flats) Hexagonal Detail (Max Crns) Installation Torque Value (Nm)
052100-16 00-16ss M16x1.5 15 - - 3 8 13.5 46 0.20 1.25 25 28 35
052100 00-20ss M20x1.5 15 ½/¾ 15 3 8 13.5 46 0.20 1.25 25 28 35
0521-0 0-20s M20x1.5 15 ½/¾ 15 8 11.5 16 46 0.20 1.25 25 28 35
052101 1-20 M20x1.5 15 ½/¾ 15 11.5 14 19 48 0.20 1.25 27 30 35
052102 2-25 M25x1.5 15 ¾/1 15/19 14 20.2 26.5 60 0.20 1.60 40 45 50
052103 3-32 M32x1.5 15 1/1¼ 19 20 26.5 33 76 0.20 2.00 45 51 70
052104 4-40 M40x1.5 15 1¼/1½ 19/21 26.5 34.0 40.5 84 0.30 2.00 55 62 90
052155 5s-50s M50x1.5 15 1½/2 21 32.5 38.0 46 90 0.40 2.50 70 79 100
052105 5-50 M50x1.5 15 1½/2 21 38 44.5 52 90 0.40 2.50 70 79 100
052166 6s-63s M63x1.5 15 2/2½ 21/30 44.5 50 60 96 0.40 2.50 85 96 120
052106 6-63 M63x1.5 15 2/2½ 21/30 50 56 67 96 0.40 2.50 85 96 120
052107 7-75 M75x1.5 15 2½/3 30/32 56 65 78 105 0.40 3.15 96 108 120

All dimensions except NPT are in mm. Intermediate thread sizes are available on request. NPT threads should be tightened “wrench tight”.

 

Find out more about our products or becoming a supplier