CCG E1EX Deluge Seal Captive Component Gland (0523)
CCG E1EX Deluge Seal Captive Component Gland (0523)

Product overview

CCG E1EX Deluge Seal Captive Component Gland (0523)

CCG E1EX Deluge Seal Captive Component Gland (0523) is a Hazardous Area Glanding Device for Steel and Aluminium Armoured Cable. Suitable for indoors, outdoors, Group II, III, Zone 1, 2, 21 and 22 hazardous areas.

CCG Part Numbers: 052300-16, 052300, 0523-0, 052301, 052322, 052302, 052333, 052303, 052344, 052304, 052355, 052305, 052366, 052306, 052377, 052307, 052308, 052399, 052309, 052310, 052311, 052312, 052313

Features & Benefits

  • For indoors, outdoors, Group II, III, Zone 1, 2, 21 and 22 hazardous areas.
  • Two part handling, no loose parts.
  • Freely rotating captive cone and inspectible cone ring provides an armour clamp and earth bond on steel wire and aluminium armour.
  • Patented disconnect system allows for inspection of armour clamp and inner seal after assembly.
  • With a patented Variable Deluge Seal™ as standard.
  • Factory fitted with a specially formulated elastomeric seal for Built-in Safety™, seals on the inner and outer sheath of the cable to IP65/66/68.
  • Precision manufactured from high-quality brass (Marine Grade Electroless Nickel Plated™) available in aluminium or stainless steel 316/316L on request.
  • Supplied with a thread sealing gasket (parallel threads only).

CCG E1EX Technical Data

Type: E1EX
Equipment Protection Levels: Ex db IIC, Ex eb IIC, Ex tb IIIC, Ex nR IIC
Gland Material: Brass (Marine Grade Electroless Nickel Plated™), Aluminium, Stainless Steel 316/316L
Seal Material: Standard Thermoset Elastomer or Extreme Temperature Seals
Sealing Gasket Material: HDPE, Nylon 66 or PTFE
Cable Type: Steel Wire Armour and Aluminium Armour
Armour Clamping: Rotating Captive Cone and Inspectible Cone Ring
Sealing Area: Inner Sheath, Outer Sheath and Variable Deluge Seal™
Optional Accessories: Adaptor, Reducer, Earth Tag, Locknut, Serrated Washer and Shroud

Note: The installer should ensure that the materials are suitable for the installation environment.

Installation Standards

  • IEC/BS EN
  • IECEx
  • ATEX
  • UKEX
  • INMETRO (Brazil)
  • TR CU (Russia)
  • CNEx (China)
  • SANS
  • Ingress Protection
  • Deluge Protection
  • Corrosion Protection
  • Marine ABS
  • DNV-GL
  • EMC Compatible

Hazardous Areas

A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such locations are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.

Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.

Additional Technical Data on CCG E1EX Deluge Seal Captive Component Gland (0523) Part Numbers can be found on the table below. For Conforming Standards & Certificates as well as Fitting Instructions, please advise PDF File.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Product Code Gland Size Ref. Metric Entry Thread (C) Metric Entry Thread (Min D) NPT Entry Thread (C) NPT Entry Thread (Min D) Cable Detail (Min A) Cable Detail (Max A) Cable Detail (Min B) Cable Detail (Max B) Max Length (E) Armour Dia (Min F) Armour Dia (Max F) Hexagonal Detail (Max Flats) Hexagonal Detail (Max Crns) Installation Torque Value (Nm)
052300-16 00-16ss M16x1.5 15 - - 3 8.5 8 13.5 60 0.90 0.90 24 27 21
052300 00-20ss M20x1.5 15 ½/¾ 15 3 8.5 8 13.5 60 0.90 0.90 24 27 21
0523-0 0-20s M20x1.5 15 ½/¾ 15 7 12 11.5 16 60 0.90 1.25 24 27 21
052301 1-20 M20x1.5 15 ½/¾ 15 9 15 14.5 20.5 63 0.90 1.25 27 30 21
052322 2s-25s M25x1.5 15 ¾/1 15/19 11 17.5 16 24.5 70 1.25 1.60 35 39 30
052302 2-25 M25x1.5 15 ¾/1 15/19 14 20 20.5 26.5 70 1.25 1.60 35 39 30
052333 3s-32s M32x1.5 15 1/1¼ 19 15 22 23 30.5 76 1.60 2.00 42 47 42
052303 3-32 M32x1.5 15 1/1¼ 19 19 26.5 26.5 33.5 76 1.60 2.00 42 47 42
052344 4s-40s M40x1.5 15 1¼/1½ 19/21 22 31.5 30 39.5 93 1.60 2.00 52 59 52
052304 4-40 M40x1.5 15 1¼/1½ 19/21 26 34 33 42.5 93 1.60 2.00 52 59 52
052355 5s-50s M50x1.5 15 1½/2 21 29 38 34 47.5 102 2.00 2.50 65 73 57
052305 5-50 M50x1.5 15 1½/2 21 34 44.5 42.5 52.5 102 2.00 2.50 65 73 57
052366 6s-63s M63x1.5 15 2/2½ 21/30 38 50 45.5 60.5 130 2.00 2.50 80 90 66
052306 6-63 M63x1.5 15 2/2½ 21/30 44 56.5 52.5 65.5 130  2.00 2.50 80 90 66
052377 7s-75s M75x1.5 15 2½/3 30/32 50 62 57 72.5 138  2.50 3.15 96 108 72
052307 7-75 M75x1.5 15 2½/3 30/32 56 67.5 65.5 78 138  2.50 3.15 96 108 72
052308 8-80 M80x2.0 20 3 32 59 69 65 77.5 195 2.50 3.15 96 108 80
052399 9s-90s M90x2.0 20 3/3½ 32/33 66 75 73 86.5 204 3.00 3.50 111 125 89
052309 9-90 M90x2.0 20 3/3½ 32/33 74 81.5 82 91 204 3.00 3.50 111 125 89
052310 10-100 M100x2.0 20 3½/4 33/34 81 91 90 100 209 3.00 3.50 125 141 98
052311 11-115 M115x2.0 20 4 34 86 98 100 114 209 3.00 4.00 135 152 175
052312 12-120 M120x2.0 20 - - 96 103 103 118 209 3.00  4.00 140 158 175
052313 13-130 M130x2.0 20 - - 100 115 113 124 209 3.00  4.00 146 164 175

All dimensions except NPT are in mm. Intermediate thread sizes are available on request. NPT threads should be tightened ‘wrench tight’.

 

Find out more about our products or becoming a supplier