CCG UNITEx-E Deluge Seal Cable Gland (0591)
CCG UNITEx-E Deluge Seal Cable Gland (0591)

Product overview

CCG UNITEx-E Deluge Seal Cable Gland (0591)

CCG UNITEx-E Deluge Seal Cable Gland (0591) is a Hazardous Area Glanding Device for Multi Armoured and Marine Cables. Suitable for indoors, outdoors, Group II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.

CCG Part Numbers: 059100S-16, 059100S, 059100, 0591-0S-16, 0591-0S, 0591-0, 059101, 059122, 059102, 059133, 059103, 059144, 059104, 059155, 059105, 059166, 059106, 059177, 059107, 059108, 059199, 059109, 059110

Features & Benefits

  • For indoors, outdoors, Group II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.
  • Two-part handling, no loose parts.
  • Freely rotating captive cone and inspectible cone ring provides an armour clamp and earth bond on steel wire armour, aluminium wire armour, tape armour and braid wire armour cables.
  • With a patented Variable Deluge Seal™ as standard.
  • Patented disconnect system that allows inspection of armour clamp and inner seal after assembly.
  • Factory fitted with a specially formulated elastomeric seal for Built-in Safety™. Seals on the outer sheath of the cable to IP65/66/68.
  • Unique low-contact IP68 inner seal making this gland suitable for use with NEK 606 marine cables susceptible to cold flow.
  • Precision manufactured from high-quality brass (Marine Grade Electroless Nickel Plated™) available in stainless steel 316/316L on request.
  • Supplied with a thread sealing gasket (parallel threads only).

CCG UNITEx-E Technical Data

Type: UNITEx-E
Equipment Protection Levels: Ex eb IIC, Ex nR IIC, Ex ta IIIC
Gland Material: Brass (Marine Grade Electroless Nickel Plated™), Stainless Steel 316/316L
Seal Material: Standard Thermoset Elastomer or Extreme Temperature Seals
Sealing Gasket Material: HDPE, Nylon 66 or PTFE
Cable Type: Steel Wire, Aluminium, Braided and Tape Armour Cable
Armour Clamping: Rotating Captive Cone and Inspectible Cone Ring
Sealing Area: Inner Sheath, Outer Sheath and Variable Deluge Seal™
Optional Accessories: Adaptor, Reducer, Earth Tag, Locknut, Serrated Washer and Shroud

Note: The installer should ensure that the materials are suitable for the installation environment.

Installation Standards

  • IEC/BS EN
  • IECEx
  • ATEX
  • UKEX
  • INMETRO (Brazil)
  • TR CU (Russia)
  • CCC/CNEx (China)
  • SANS
  • Ingress Protection
  • Deluge Protection
  • Corrosion Protection
  • Marine ABS
  • DNV-GL
  • EMC Compatible

Hazardous Areas

A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such locations are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.

Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.

Additional Technical Data on CCG UNITEx-E Deluge Seal Cable Gland (0591) Part Numbers can be found on the table below. For Conforming Standards & Certificates as well as Fitting Instructions, please advise PDF File.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Product Code Gland Size Ref. Metric Entry Thread (C) Metric Entry Thread (Min D) NPT Entry Thread (C) NPT Entry Thread (Min D) Cable Detail (Min A) Cable Detail (Max A) Cable Detail (Min B) Cable Detail (Max B) Max Length (E) Armour Dia (Min F) Armour Dia (Max F) Hexagonal Detail (Max Flats) Hexagonal Detail (Max Crns) Installation Torque Value (Nm)
059100S-16 00s-16ss M16x1.5 15 - - 3 8.5 5 10.5 56 0.2 0.9 24 27 21
059100S 00s-20ss M20x1.5 15 ½/¾ 15 3 8.5 5 10.5 56 0.2 0.9 24 27 21
059100 00-20ss M20x1.5 15 ½/¾ 15 3 8.5 8 14 56 0.2 0.9 24 27 21
0591-0S-16 0s-16s M16x1.5 15 - - 7 8.5 8 14 59 0.2 1.25 24 27 21
0591-0S 0s-20s M20x1.5 15 ½/¾ 15 7 12 8 14 59 0.2 1.25 24 27 21
0591-0 0-20s M20x1.5 15 ½/¾ 15 7 12 11.5 16 59 0.2 1.25 24 27 21
059101 1-20 M20x1.5 15 ½/¾ 15 9 15 12.5 20.5 73 0.2 1.25 27 30 21
059122 2s-25s M25x1.5 15 ¾/1 15/19 11 17.5 16 24.5 82 0.2 1.60 35 39 30
059102 2-25 M25x1.5 15 ¾/1 15/19 14 20 18 27 82 0.2 1.60 35 39 30
059133 3s-32s M32x1.5 15 1/1¼ 19 15 22 20 30.5 94 0.2 2.00 42 47 42
059103 3-32 M32x1.5 15 1/1¼ 19 19 26.5 23 33.5 94 0.2 2.00 42 47 42
059144 4s-40s M40x1.5 15 1¼/1½ 19/21 22 31.5 26.5 39 100 0.3 2.00 52 59 52
059104 4-40 M40x1.5 15 1¼/1½ 19/21 26 34 28 40 105 0.3 2.00 52 59 52
059155 5s-50s M50x1.5 15 1½/2 21 29 38 35.2 47.5 121  0.4 2.50 65 73 57
059105 5-50 M50x1.5 15 1½/2 21 34 44.5 44.4 52.8 121  0.4 2.50 65 73 57
059166 6s-63s M63x1.5 15 2/2½ 21/30 38 50 45.5 60.5 126  0.4 2.50 80 90 66
059106 6-63 M63x1.5 15 2/2½ 21/30 44 56.5 54.6 65.9 126  0.4 2.50 80 90 66
059177 7s-75s M75x1.5 15 2½/3 30/32 50 62 59 72.5 138  0.4 3.15 96 108 72
059107 7-75 M75x1.5 15 2½/3 30/32 56 67.5 65 78 138  0.4 3.15 96 108 72
059108 8-80 M80x2.0 20 3 32 59 69 65 77.5 142  0.4 3.15 96 108 80
059199 9s-90s M90x2.0 20 3/3½ 32/33 66 75 73 86.5 156  0.4 3.50 111 125 89
059109 9-90 M90x2.0 20 3/3½ 32/33 74 81.5 82 91 156  0.4 3.50 111 125 89
059110 10-100 M100x2.0 20 3½/4 33/34 81 91 90 100 173  0.4 3.50 125 141 98

All dimensions except NPT are in mm. Intermediate thread sizes are available on request. NPT threads should be tightened ‘wrench tight’.

 

Find out more about our products or becoming a supplier