nVent CADDY Speed Link SLK System
nVent CADDY Speed Link SLK System

Product overview

nVent CADDY Speed Link SLK System provides a versatile overhead support solution that is easy to adjust and installs quickly to almost any structure.

The Speed Link SLK System supports a wide range of applications, including duct-work, pipe and tube, cable tray, lighting, conduit, strut profiles and signage from overhead structural building members.

It is available with a variety of specialty end fittings for the most common building structure types, a range of wire rope diameters and lengths, and includes a unique keyless locking device.

nVent CADDY Speed Link SLK with Angle Bracket

nVent CADDY Speed Link SLK with Angle Bracket

nVent CADDY Speed Link SLK with Shot-Fire Bracket

 nVent CADDY Speed Link SLK with Decking Hook

nVent CADDY Speed
Link SLK with Decking Hook

 nVent CADDY Speed Link SLK with Hammer-On Flange Clip

nVent CADDY Speed Link SLK with Hammer-On Flange Clip
nVent CADDY Speed Link SLK with Hook

nVent CADDY Speed Link SLK with Hook

 nVent CADDY Speed Link SLK with Loop

nVent CADDY Speed Link SLK with Loop

 nVent CADDY Speed Link SLK with Threaded Stud End

nVent CADDY Speed
Link SLK with Threaded Stud End

 nVent CADDY Speed Link SLK with Wedge Anchor

nVent CADDY Speed Link SLK with Wedge Anchor
nVent CADDY Speed Link SLK with Toggle

nVent CADDY Speed Link SLK with Toggle

 nVent CADDY Speed Link SLK with Y-Hook

nVent CADDY Speed Link SLK with Y-Hook

 nVent CADDY Speed Link SLK with Y-Toggle

nVent CADDY Speed
Link SLK with Y-Toggle

  

Features

  • Push/pull keyless release allows easy adjustments
  • Range includes solutions for both 1.5 mm and 2 mm cables as well as larger 3 mm cables for higher load applications
  • Low-profile locking device minimizes visual impact
  • Cable spread of 90 degrees allows positioning the device closer to the load
  • Keyless release tubes are easy to operate while wearing gloves
  • Double-sided locking mechanism enables simple height adjustment
  • Individual packaging holds wire rope neatly until objects are ready to install

 

For detailed Product Information and Technical Data see table below.

 

*Technical Data subject to change without notice.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

 

Technical Data

nVent CADDY Speed Link SLK with Angle Bracket
nVent CADDY Speed Link SLK with Angle Bracket Features:

  • Complete system includes wire, locking device and pre-assembled angle bracket end fitting
  • Ideal for attaching to concrete, steel or wood surfaces
  • Simple alternative to jack chain and additional hardware
  • Material: Steel; Zinc Alloy; Polypropylene
  • Finish: Electrogalvanized
  • Static Load Safety Factor: 5:1
  • Complies With: SMACNA HVAC-DCS
Part Number Article Number Wire Rope
Length		 Wire Rope
Diameter		 A Hole Size
(HS)		 Height
(H)		 Width
(W)		 Thickness
(T)		 Angle
(a)		 Static Load
(F)		 Certifications
SLK15L1AB 196500 1 m 1.5 mm 22.6 mm 7.1 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus
SLK15L2AB 196501 2 m 1.5 mm 22.6 mm 7.1 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus
SLK15L3AB 196502 3 m 1.5 mm 22.6 mm 7.1 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus
SLK15L5AB 196503 5 m 1.5 mm 22.6 mm 7.1 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus
SLK2L2AB 196529 2 m 2 mm 22.6 mm 7.1 mm 55 mm 19 mm 12.5 mm 90° Max 440 N cULus
SLK2L3AB 196530 3 m 2 mm 22.6 mm 7.1 mm 55 mm 19 mm 12.5 mm 90° Max 440 N cULus
SLK2L5AB 196531 5 m 2 mm 22.6 mm 7.1 mm 55 mm 19 mm 12.5 mm 90° Max 440 N cULus
SLK3L1AB 196712 1 m 3 mm 22.6 mm 7.1 mm 62 mm 24 mm 16 mm 90° Max 890 N -
SLK3L2AB 196713 2 m 3 mm 22.6 mm 7.1 mm 62 mm 24 mm 16 mm 90° Max 890 N -
SLK3L3AB 196714 3 m 3 mm 22.6 mm 7.1 mm 62 mm 24 mm 16 mm 90° Max 890 N -
SLK3L5AB 196715 5 m 3 mm 22.6 mm 7.1 mm 62 mm 24 mm 16 mm 90° Max 890 N -
SLK3L7AB 196728 7 m 3 mm 22.6 mm 7.1 mm 62 mm 24 mm 16 mm 90° Max 890 N -
SLK3L10AB 196716 10 m 3 mm 22.6 mm 7.1 mm 62 mm 24 mm 16 mm 90° Max 890 N -

NVENT CADDY SPEED LINK SLK WITH SHOT-FIRE BRACKET   
NVENT CADDY SPEED LINK SLK WITH SHOT-FIRE BRACKET Features:

  • Complete system includes wire, locking device and pre-assembled angle bracket end fitting
  • Ideal for attaching to concrete, steel or wood surfaces
  • Simple alternative to jack chain and additional hardware
  • Material: Steel; Zinc Alloy; Polypropylene
  • Finish: Electrogalvanized
  • Static Load Safety Factor: 5:1
  • Complies With: SMACNA HVAC-DCS

 

 

 
Height
(H)		 Width
(W)		 Thickness
(T)		 Angle
(a)
55 mm 19 mm 12.5 mm 90° Max
Part Number Article Number Wire Rope
Length		 Wire Rope
Diameter		 A B C Static Load
(F)
SLK15L1SF 196517 1 m 1.5 mm 37.5 mm 7.6 mm 31.8 mm 195 N
SLK15L2SF 196518 2 m 1.5 mm 37.5 mm 7.6 mm 31.8 mm 195 N
SLK15L3SF 196519 3 m 1.5 mm 37.5 mm 7.6 mm 31.8 mm 195 N
SLK15L5SF 196520 5 m 1.5 mm 37.5 mm 7.6 mm 31.8 mm 195 N
SLK2L2SF 196546 2 m 2 mm 37.5 mm 7.6 mm 31.8 mm 440 N
SLK2L3SF 196547 3 m 2 mm 37.5 mm 7.6 mm 31.8 mm 440 N
SLK2L5SF 196548 5 m 2 mm 37.5 mm 7.6 mm 31.8 mm 440 N

Notes:

  • Uses Powers Fasteners, Inc. part number 50032.
  • Static load was established based on a 1” (25.4 mm) embedment depth and 3,000 psi (20.68 MPa) lightweight concrete. For variations in embedment and material please consult www.powers.com.
  • Pre-assembled drive pin from Powers Fasteners, Inc. works with Powers® C4CZ, Simpson® GCN-MEPKT, SPIT® P1000, P200, P2201, P3500 / PA3500, P35s, P45, P60, P7201, Sniper; Ramset® 721, Cobra, D45 / D60 / D60L, M70, SA270, T3SS, TS750P, TS60P, Viper; Hilti® DX35, DX350 / DX351 / DX36M, DX100 / DX200, DX460, DXA40, DXA41,​ DXE72 / DX400; Würth Diva-1, BST-1, BST-2 or equivalent nailers.
  • For shot-fired supports in seismic design category D, E, or F, maximum load is the lesser of 90 lb (400 N) or the published load.

NVENT CADDY SPEED LINK SLK WITH DECKING HOOK
NVENT CADDY SPEED LINK SLK WITH DECKING HOOK Features:

  • Complete system includes wire, locking device and pre-assembled decking hook end fitting
  • Quickly and easily attaches to hollow metal decking
  • Spring-loaded ends snap into decking hole and lock into place
  • Innovative design helps protect the wire from sharp edges of decking hole, minimizing risk of damage to wire
  • Material: Steel; Zinc Alloy; Polypropylene
  • Finish: Electrogalvanized
  • Static Load Safety Factor: 5:1
  • Complies With: SMACNA HVAC-DCS

 

 

 
Height
(H)		 Width
(W)		 Thickness
(T)		 Angle (a)
55 mm 19 mm 12.5 mm 90° Max
Part Number Article Number Wire Rope
Length		 Wire Rope
Diameter		 Roof Decking
Sheet Thickness		 A Hole Size
(HS)		 Static Load
(F)
SLK15L1DH 196676 1 m 1.5 mm 1.5 mm Max 9.2 mm 8 mm 195 N
SLK15L2DH 196677 2 m 1.5 mm 1.5 mm Max 9.2 mm 8 mm 195 N
SLK15L3DH 196504 3 m 1.5 mm 1.5 mm Max 9.2 mm 8 mm 195 N
SLK15L5DH 196505 5 m 1.5 mm 1.5 mm Max 9.2 mm 8 mm 195 N
SLK2L3DH 196532 3 m 2 mm 1.5 mm Max 9.2 mm 8 mm 440 N
SLK2L5DH 196533 5 m 2 mm 1.5 mm Max 9.2 mm 8 mm 440 N
SLK2L7DH 196534 7 m 2 mm 1.5 mm Max 9.2 mm 8 mm 440 N

Notes:

  • Load rating is only applicable if the load-bearing capacity of the supporting element (steel decking) is adequate.
  •  Check with deck manufacturer for recommended load capacity.

NVENT CADDY SPEED LINK SLK WITH HAMMER-ON FLANGE CLIP
NVENT CADDY SPEED LINK SLK WITH HAMMER-ON FLANGE CLIP Features:

  • Complete system includes wire, locking device and pre-assembled nVent CADDY Hammer-On Flange Clip end fitting
  • Installs with just a hammer
  • Fits most beams
  • Material: Steel; Zinc Alloy; Polypropylene
  • Finish: Electrogalvanized
  • Static Load Safety Factor: 5:1
  • Complies With: SMACNA HVAC-DCS

 

 

 
Height
(H)		 Width
(W)		 Thickness
(T)		 Angle
(a)
55 mm 19 mm 12.5 mm 90° Max
Part Number Article Number Wire Rope Length Wire Rope Diameter Flange Thickness
(FT)		 Static Load
(F)
SLK15L34H24 196506 3 m 1.5 mm 3 – 8 mm 195 N
SLK15L34H58 196507 3 m 1.5 mm 8 – 14 mm 195 N
SLK2L34H24 196535 3 m 2 mm 3 – 8 mm 440 N
SLK2L34H58 196536 3 m 2mm 8 – 14 mm 440 N

NVENT CADDY SPEED LINK SLK WITH HOOK
NVENT CADDY SPEED LINK SLK WITH HOOK Features:

  • Complete system includes wire, locking device and pre-assembled hook end fitting
  • Hooks to a wide range of nVent CADDY fasteners
  • Fastens to the building structure or hanging services by looping around and hooking to wire rope
  • Easy to remove for applications requiring maintenance
  • Spring latch helps provide secure connection
  • Insert cable through hole and use bottom side of hook as an end stop
  • Also available in Y-hook configuration
  • Material: Steel; Zinc Alloy; Polypropylene
  • Finish: Electrogalvanized
  • Static Load Safety Factor: 5:1
Part Number Article Number Wire Rope
Length (m)		 Wire Rope
Diameter (mm)		 A (mm) B (mm) C (mm) H (mm) W (mm) T (mm) a (°) F (N) Certifications Standard
Packaging
Quantity
SLK15L1 196508 1 1.5 48.0 18.0 4.5 55 19 12.5 90 Max 195 cULus,SMACNA 20 pc
SLK15L2 196509 2 1.5 48.0 18.0 4.5 55 19 12.5 90 Max 195 cULus,SMACNA 20 pc
SLK15L2R2 196614 2 1.5 48.0 18.0 4.5 55 19 12.5 90 Max 195 cULus,SMACNA 15 x 2 pc
SLK15L3 196510 3 1.5 48.0 18.0 4.5 55 19 12.5 90 Max 195 cULus,SMACNA 20 pc
SLK15L3R2 196615 3 1.5 48.0 18.0 4.5 55 19 12.5 90 Max 195 cULus,SMACNA 15 x 2 pc
SLK15L5 196511 5 1.5 48.0 18.0 4.5 55 19 12.5 90 Max 195 cULus,SMACNA 20 pc
SLK15L5R2 196616 5 1.5 48.0 18.0 4.5 55 19 12.5 90 Max 195 cULus,SMACNA 15 x 2 pc
SLK15L7 196512 7 1.5 48.0 18.0 4.5 55 19 12.5 90 Max 195 cULus,SMACNA 20 pc
SLK15L10 196513 10 1.5 48.0 18.0 4.5 55 19 12.5 90 Max 195 cULus,SMACNA 20 pc
SLK2L1 196537 1 2 57.0 20.0 5.5 55 19 12.5 90 Max 440 cULus,SMACNA 10 pc
SLK2L2 196538 2 2 57.0 20.0 5.5 55 19 12.5 90 Max 440 cULus,SMACNA 10 pc
SLK2L2R2 196619 2 2 57.0 20.0 5.5 55 19 12.5 90 Max 440 cULus,SMACNA 15 x 2 pc
SLK2L3 196539 3 2 57.0 20.0 5.5 55 19 12.5 90 Max 440 cULus,SMACNA 10 pc
SLK2L3R2 196620 3 2 57.0 20.0 5.5 55 19 12.5 90 Max 440 cULus,SMACNA 15 x 2 pc
SLK2L5 196540 5 2 57.0 20.0 5.5 55 19 12.5 90 Max 440 cULus,SMACNA 10 pc
SLK2L5R2 196621 5 2 57.0 20.0 5.5 55 19 12.5 90 Max 440 cULus,SMACNA 15 x 2 pc
SLK2L7 196541 7 2 57.0 20.0 5.5 55 19 12.5 90 Max 440 cULus,SMACNA 10 pc
SLK2L10 196542 10 2 57.0 20.0 5.5 55 19 12.5 90 Max 440 cULus,SMACNA 10 pc
SLK2L10R2 196622 10 2 57.0 20.0 5.5 55 19 12.5 90 Max 440 cULus,SMACNA 15 x 2 pc
SLK3L1 196700 1 3 57.6 23.2 6.1 62 24 16 90 Max 890 SMACNA 10 x 10 pc
SLK3L2 196701 2 3 57.6 23.2 6.1 62 24 16 90 Max 890 SMACNA 10 x 10 pc
SLK3L3 196702 3 3 57.6 23.2 6.1 62 24 16 90 Max 890 SMACNA 5 x 10 pc
SLK3L3R2 196625 3 3 57.6 23.2 6.1 62 24 16 90 Max 890 SMACNA 10 x 2 pc
SLK3L5 196703 5 3 57.6 23.2 6.1 62 24 16 90 Max 890 SMACNA 5 x 10 pc
SLK3L5R2 196626 5 3 57.6 23.2 6.1 62 24 16 90 Max 890 SMACNA 15 x 2 pc
SLK3L7 196704 7 3 57.6 23.2 6.1 62 24 16 90 Max 890 SMACNA 5 x 5 pc
SLK3L10 196705 10 3 57.6 23.2 6.1 62 24 16 90 Max 890 SMACNA 5 x 5 pc

NVENT CADDY SPEED LINK SLK WITH LOOP
NVENT CADDY SPEED LINK SLK WITH LOOP Features:

  • Complete system includes wire, locking device and pre-assembled loop end fitting
  • Easy and flexible solution attaches to building structures
  • Wire rope wraps around structure and through loop for quick installation
  • Ideal for attaching to purlins, beams and other structural members
  • Works well in tight or confined spaces
  • Loop attaches directly to pipe, ductwork or other hanging assemblies
  • Material: Steel; Zinc Alloy; Polypropylene
  • Finish: Electrogalvanized
  • Static Load Safety Factor: 5:1
Part Number Article Number Wire Rope
Length		 Wire Rope
Diameter		 Length
(L)		 Height
(H)		 Width
(W)		 Thickness
(T)		 Angle
(a)		 Static Load
(F)		 Certifications Standard
Packaging
Quantity
SLK15L1LP 196601 1 m 1.5 mm 101.6 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus,SMACNA 20 pc
SLK15L1LPR2 196628 1 m 1.5 mm 101.6 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus,SMACNA 15 x 2 pc
SLK15L2LP 196514 2 m 1.5 mm 101.6 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus,SMACNA 20 pc
SLK15L2LPR2 196629 2 m 1.5 mm 101.6 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus,SMACNA 15 x 2 pc
SLK15L3LP 196515 3 m 1.5 mm 101.6 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus,SMACNA 20 pc
SLK15L3LPR2 196630 3 m 1.5 mm 101.6 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus,SMACNA 15 x 2 pc
SLK15L5LP 196516 5 m 1.5 mm 101.6 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus,SMACNA 20 pc
SLK15L5LPR2 196631 5 m 1.5 mm 101.6 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus,SMACNA 15 x 2 pc
SLK15L7LP 196602 7 m 1.5 mm 101.6 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus,SMACNA 20 pc
SLK15L10LP 196603 10 m 1.5 mm 101.6 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus,SMACNA 20 pc
SLK2L1LP 196604 1 m 2 mm 101.6 mm 55 mm 19 mm 12.5 mm 90° Max 440 N cULus,SMACNA 10 pc
SLK2L2LP 196543 2 m 2 mm 101.6 mm 55 mm 19 mm 12.5 mm 90° Max 440 N cULus,SMACNA 10 pc
SLK2L3LP 196544 3 m 2 mm 101.6 mm 55 mm 19 mm 12.5 mm 90° Max 440 N cULus,SMACNA 10 pc
SLK2L5LP 196545 5 m 2 mm 101.6 mm 55 mm 19 mm 12.5 mm 90° Max 440 N cULus,SMACNA 10 pc
SLK2L7LP 196605 7 m 2 mm 101.6 mm 55 mm 19 mm 12.5 mm 90° Max 440 N cULus,SMACNA 5 pc
SLK2L10LP 196606 10 m 2 mm 101.6 mm 55 mm 19 mm 12.5 mm 90° Max 440 N cULus,SMACNA 5 pc
SLK3L1LP 196706 1 m 3 mm 101.6 mm 62 mm 24 mm 16 mm 90° Max 890 N SMACNA 10 x 10 pc
SLK3L2LP 196707 2 m 3 mm 101.6 mm 62 mm 24 mm 16 mm 90° Max 890 N SMACNA 10 x 10 pc
SLK3L3LP 196708 3 m 3 mm 101.6 mm 62 mm 24 mm 16 mm 90° Max 890 N SMACNA 5 x 10 pc
SLK3L5LP 196709 5 m 3 mm 101.6 mm 62 mm 24 mm 16 mm 90° Max 890 N SMACNA 5 x 10 pc
SLK3L7LP 196710 7 m 3 mm 101.6 mm 62 mm 24 mm 16 mm 90° Max 890 N SMACNA 5 x 5 pc
SLK3L10LP 196711 10 m 3 mm 101.6 mm 62 mm 24 mm 16 mm 90° Max 890 N SMACNA 5 x 5 pc

NVENT CADDY SPEED LINK SLK WITH THREADED STUD END
NVENT CADDY SPEED LINK SLK WITH THREADED STUD END Features:

  • Complete system includes wire, locking device and pre-assembled threaded stud end fitting
  • Attaches to structures with threaded anchors or devices with threaded hole
  • Connects directly to threaded devices in trapeze assemblies, light fixtures, HVAC assemblies or signage
  • Material: Steel; Zinc Alloy; Polypropylene
  • Finish: Electrogalvanized
  • Static Load Safety Factor: 5:1
  • Complies With: SMACNA HVAC-DCS
Wire Rope Diameter: 1.5 mm
Part Number Article Number Wire Rope
Length		 Rod Size
(RS)		 Screw Length
(L)		 Height
(H)		 Width
(W)		 Thickness
(T)		 Angle
(a)		 Static Load
(F)		 Certifications
SLK15L1SEM6 196564 1 m M6 25 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus
SLK15L1SEM8 196565 1 m M8 45 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus
SLK15L2SEM6 196566 2 m M6 25 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus
SLK15L2SEM8 196567 2 m M8 45 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus
SLK15L3SEM6 196568 3 m M6 25 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus
SLK15L3SEM8 196570 3 m M8 45 mm 55 mm 19 mm 12.5 mm 90° Max 195 N cULus
Wire Rope Diameter: 2.0 mm
Part Number Article Number Wire Rope
Length		 Rod Size
(RS)
 Screw Length
(L)		 Height
(H)		 Width
(W)		 Thickness
(T)		 Angle
(a)		 Static Load
(F)		 Certifications
SLK2L2SEM6 196558 2 m M6 25 mm 55 mm 19 mm 12.5 mm 90° Max 440 N cULus
SLK2L2SEM8 196559 2 m M8 45 mm 55 mm 19 mm 12.5 mm 90° Max 440 N cULus
SLK2L3SEM6 196560 3 m M6 25 mm 55 mm 19 mm 12.5 mm 90° Max 440 N cULus
SLK2L3SEM8 196561 3 m M8 45 mm 55 mm 19 mm 12.5 mm 90° Max 440 N cULus
SLK2L5SEM6 196562 5 m M6 25 mm 55 mm 19 mm 12.5 mm 90° Max 440 N cULus
SLK2L5SEM8 196563 5 m M8 45 mm 55 mm 19 mm 12.5 mm 90° Max 440 N cULus
Wire Rope Diameter: 3.0 mm
Part Number Article Number Wire Rope
Length		 Rod Size
(RS)		 Screw Length
(L)		 Height
(H)		 Width
(W)		 Thickness
(T)		 Angle
(a)		 Static Load
(F)		 Certifications
SLK3L10SEM10 196721 10 m M10 45 mm 62 mm 24 mm 16.0 mm 90° Max 890 N –
SLK3L1SEM10 196717 1 m M10 45 mm 62 mm 24 mm 16.0 mm 90° Max 890 N –
SLK3L2SEM10 196718 2 m M10 45 mm 62 mm 24 mm 16.0 mm 90° Max 890 N –
SLK3L3SEM10 196719 3 m M10 45 mm 62 mm 24 mm 16.0 mm 90° Max 890 N –
SLK3L5SEM10 196720 5 m M10 45 mm 62 mm 24 mm 16.0 mm 90° Max 890 N –
SLK3L7SEM10 196729 7 m M10 45 mm 62 mm 24 mm 16.0 mm 90° Max 890 N –

NVENT CADDY SPEED LINK SLK WITH WEDGE ANCHOR
NVENT CADDY SPEED LINK SLK WITH WEDGE ANCHOR Features:

  • Complete system includes wire, locking device and wedge anchor from Powers Fasteners, Inc.
  • Quickly and easily attaches into cracked and non-cracked concrete
  • No special tools required
  • ​ETA-13/0106 approval available for wedge anchor from Powers Fasteners, Inc​
  • Material: Steel; Zinc Alloy; Polypropylene
  • Finish: Electrogalvanized
  • Static Load Safety Factor: 5:1
  • Complies With: SMACNA HVAC-DCS

 
Drill Bit Diameter   Drill Hole Depth Embedment Depth
6 mm 60 mm 55 mm Min
Wire Rope Diameter: 1.5 mm
Part Number Article Number Wire Rope
Length		 Length
(L)		 Height
(H)		 Width
(W)		 Thickness
(T)		 Angle
(a)		 Static Load
(F)
SLK15L1WA6 196670 1 m 63.5 mm 55 mm 19 mm 12.5 mm 90° Max 195 N
SLK15L2WA6 196671 2 m 63.5 mm 55 mm 19 mm 12.5 mm 90° Max 195 N
SLK15L3WA6 196672 3 m 63.5 mm 55 mm 19 mm 12.5 mm 90° Max 195 N
SLK15L5WA6 196673 5 m 63.5 mm 55 mm 19 mm 12.5 mm 90° Max 195 N
SLK15L7WA6 196674 7 m 63.5 mm 55 mm 19 mm 12.5 mm 90° Max 195 N
SLK15L10WA6 196675 10 m 63.5 mm 55 mm 19 mm 12.5 mm 90° Max 195 N
Wire Rope Diameter: 2.0 mm
Part Number Article Number Wire Rope
Length		 Length
(L)		 Height
(H)		 Width
(W)		 Thickness
(T)		 Angle
(a)		 Static Load
(F)
SLK2L1WA6 196733 1 m 63.5 mm 55 mm 19 mm 12.5 mm 90° Max 440 N
SLK2L2WA6 196734 2 m 63.5 mm 55 mm 19 mm 12.5 mm 90° Max 440 N
SLK2L3WA6 196735 3 m 63.5 mm 55 mm 19 mm 12.5 mm 90° Max 440 N
SLK2L5WA6 196736 5 m 63.5 mm 55 mm 19 mm 12.5 mm 90° Max 440 N
SLK2L7WA6 196737 7 m 63.5 mm 55 mm 19 mm 12.5 mm 90° Max 440 N
SLK2L10WA6 196738 10 m 63.5 mm 55 mm 19 mm 12.5 mm 90° Max 440 N
Wire Rope Diameter: 3.0 mm
Part Number Article Number Wire Rope
Length		 Length
(L)		 Height
(H)		 Width
(W)		 Thickness
(T)		 Angle
(a)		 Static Load
(F)
SLK3L1WA6 196722 1 m 63.5 mm 62 mm 24 mm 16.0 mm 90° Max 890 N
SLK3L2WA6 196723 2 m 63.5 mm 62 mm 24 mm 16.0 mm 90° Max 890 N
SLK3L3WA6 196724 3 m 63.5 mm 62 mm 24 mm 16.0 mm 90° Max 890 N
SLK3L5WA6 196725 5 m 63.5 mm 62 mm 24 mm 16.0 mm 90° Max 890 N
SLK3L7WA6 196726 7 m 63.5 mm 62 mm 24 mm 16.0 mm 90° Max 890 N
SLK3L10WA6 196727 10 m 63.5 mm 62 mm 24 mm 16.0 mm 90° Max 890 N

NVENT CADDY SPEED LINK SLK WITH TOGGLE
NVENT CADDY SPEED LINK SLK WITH TOGGLE Features:

  • Complete system includes wire, locking device and pre-assembled toggle end fitting
  • Attaches to clearance holes in a variety of structures or hanging devices
  • Ideal for supporting lighting fixtures
  • Also available in Y-toggle configuration
  • Material: Steel; Zinc Alloy; Polypropylene
  • Finish: Electrogalvanized
  • Static Load Safety Factor: 5:1
  • Complies With: SMACNA HVAC-DCS
  
Height (H) Width (W) Thickness (T) Angle (a)
55 mm 19 mm 12.5 mm 90° Max
Wire Rope Diameter: 1.5 mm
Part Number Article Number Wire Rope
Length		 A B Static Load
(F)		 Standard Packaging
Quantity
SLK15L1T 196521 1 m 39 mm 5 mm 195 N 20 pc
SLK15L1TR2 196643 1 m 39 mm 5 mm 195 N 15 x 2 pc
SLK15L2T 196522 2 m 39 mm 5 mm 195 N 20 pc
SLK15L2TR2 196644 2 m 39 mm 5 mm 195 N 15 x 2 pc
SLK15L3T 196523 3 m 39 mm 5 mm 195 N 20 pc
SLK15L3TR2 196645 3 m 39 mm 5 mm 195 N 15 x 2 pc
SLK15L5T 196524 5 m 39 mm 5 mm 195 N 20 pc
SLK15L7T 196525 7 m 39 mm 5 mm 195 N 20 pc
SLK15L10T 196526 10 m 39 mm 5 mm 195 N 20 pc

Find out more about our products or becoming a supplier