Snake Tray 610 Series – Steel Cable Runway Accessories

Cable Runway Corner Bracket

Creates a radius for L, T, or X-shaped intersections of Cable Runway formed when two or more pieces of Cable Runway are connected together with the Junction-Splice Kit

Part No: CM 610-CB

Butt Splice Kit

Butt-Splice Kit (CM 610-BSK) connects two sections of runway end-to-end. Kit consists of:

• (4) slice plates
• (2) 3/8″-16 trimmed head bolts
• (2) 3/8″-16 hex nuts
• (2) 3/8″ split lock washers

Part No: CM 610-BSK, Description: Straight Splice Kit

Junction Splice Kit

Junction-Splice Kit (CM 610-JSK) connects two sections of runway end-to-end. Kit consists of:

• (4) Slice plates
• (2) 3/8″-16 trimmed head bolts
• (2) 3/8″-16 hex nuts
• (2) 3/8″ split lock washers

Part No: CM 610-JSK, Size: T – Splice Kit

Threaded Rod Ceiling Mounts

Secures threaded rod to Cable Runway. Sold in pairs, hardware not included.

Part No: CM 610-38-TRK

Wall Termination Kit

Kit consist of:

• (1) wall angle
• (2) 5/16″-18″ x 2-¼” J-bolts
• (2) 5/16″-18 hex nuts
• (2) 5/16″- lock washers

Part No: CM 610-X-WTK

*X denotes cable runway width

Rack Termination Kit

Universal Mounting plate for data racks.  Installs in both orientations. Comes with all necessary mounting hardware.

Kit consist of:

• (2) 45º outside clamps
• (2) Inside edge clamps
• (2) 3/8″-16 trimmed round head, square neck bolts
• (2) 3/8″-16 hex nuts and lock washers

Part No: CM 610-X-RBN

Cable Runway Elevation Kit

Supports cable runway above a continuous row of racks or cabinets of varying heights and provides additional space between the tops of the racks or cabinets and the cable runway.

• Multiple ranges of incremental elevation
• Can be mounted perpendicular or parallel
• Rack kit includes a single pair of brackets and assembly hardware
• Rack kits attaches to the rack with a mounting plate (sold separately)
• Cabinet kits include two pairs of brackets and assembly hardware

Part No: CM 610-RBN-ER, Description: Rack Mounting and Lifting Kit
Part No: CM 610-CBN-ER, Description: Cabinet Mounting and Lifting Kit

Radius Drop

Part No: CM 610-TO-6, Size: 6″ W
Part No: CM 610-TO-9, Size: 9″ W
iPart No: CM 610-TO-12, Size: 12″ W
Part No: CM 610-TO-18, Size: 18″ W

Patch Panel Adapter

Part No: CM 801-PP/19-1U, Size: 19″ Patch Panel Bracket – 1U
Part No: CM 801-PP/19-2U, Size: 19″ Patch Panel Bracket – 2U
iPart No: CM 801-PP/19-3U, Size: 19″ Patch Panel Bracket – 3U
Part No: CM 801-PP/19-4U, Size: 19″ Patch Panel Bracket – 4U

Custom sizes available.

Power Distribution Module

The Power Distribution Module is the cornerstone of the Cable Runway power distribution system. It is available empty, or loaded with customer specified NEMA receptacles. It is also available pre-wired with MC cables to be carried by the Cable Runway and terminated at the electrical panel.

Part No: CM 801-PM-XX, Description: Customer Specified Power Distribution Module

*XX denotes customer specified powere requirements. Contact us to assist you with the power distribution configuration and part numbers.

Bonding Jumper

Use at each expansion splice and where the cable tray is not mechanically/electrically continuous to ground. Sold individually. Installation hardware included. Bonding jumper is 16″ long.

Part No: CM BJ-1, Size: CU #1 / 600 A
iPart No: CM BJ-1/0, Size: CU m4/0 / 1600 A
Part No: CM BJ-250, Size: CU 250 MCM / 2000 A

Triangle Wall Bracket

Part No: CM 610-WBN-001