Prysmian BICON Trefoil Polyamide Cleat 375AB Series
Product overview
Prysmian BICON Trefoil Polyamide Cleat 375AB Series for the mounting of three low, medium or high voltage cables in a triangular (trefoil) formation. Designed for 3 cables with outer diameters between Ø 27 mm and 150 mm.
Part Numbers: 375AB01, 375AB02, 375AB03, 375AB04, 375AB05, 375AB06.
Prysmian BICON 375AB Series Features
- Manufactured from high-strength glass-filled polyamide 6 (PA), glass fibre reinforced
- Suitable for cables in trefoil formation with diameters from 27 – 150mm
- For mounting low, medium and high voltage cables
- High range take – able to accommodate loosely toleranced cables
- Non magnetic / non conductive.
- Non oxidizing / non corrosive.
- No sharp angles.
- Stackable
- Life expectancy 40+ years
- Halogen free, flame retardant and self-extinguising – ideal for tunnels and buildings V-0 (UL94)
- Weather resistant – UV, Ozone and frost
- Resistant to oils, salts, moisture, acids, other aggressive materials and even nuclear radiation.
- Resistant to Ionizing radiation – ideal for use in nuclear power plants
- Fully recyclable
- Available pre-mounted
- Approved to IEC 61914:2009
- Tailor-made fastening material is also available.
- Operation Temperatures -40°C to +125°C (with short periods at +225°C)
Tests
Prysmian BICON 375AB Series cable clamps (cable cleats) have been tested by UL (the underwriters laboratories U.S.A.), Voltalab in Grenoble (Schneider), the Prof. Ir. Damstra laboratory (Eaton) and SGS Brussels amongst other in accordance with international safety standard NEN-EN-IEC 61914:2009. (All test reports are available upon request).
Cable and Cleat Selection
Design Number | Cable Diameter ∅ (mm) | Cable Diameter ∅ (inch) |
375AB01 | 27 – 38 mm | 1.06 – 1.5 in. |
375AB02 | 38 – 51 mm | 1.50 – 2.01 in. |
375AB03 | 51 – 69 mm | 2.01 – 2.72 in. |
375AB04 | 69 – 90 mm | 2.72 – 3.54 in. |
375AB05 | 90 – 118 mm | 3.54 – 4.65 in. |
375AB06 | 118 – 150 mm | 4.65 – 5.91 in. |
Note: All sizes have stud clearance holes of 15.5mm, allowing fixing sizes M10, M12 & M14 to be used.
Download PDF File for Additional Information on Prysmian BICON Trefoil Polyamide Cleat 375AB Series.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
Interested in this Product?
+44 (0)1744 762 929Technical Data
Part No | Cable ∅ | A | B | C | D | E | F | G | H |
375AB01 | 27 - 38 mm | 180 mm | 75 mm | 125 mm | 15 mm | 63 - 90 mm | 12 mm | 35 mm | 16.5 mm |
375AB02 | 38 - 51 mm | 195 mm | 80 mm | 145 mm | 15 mm | 84 - 115 mm | 16 mm | 45 mm | 20 mm |
375AB03 | 51 - 69 mm | 220 mm | 85 mm | 170 mm | 15 mm | 109 - 150 mm | 21 mm | 58 mm | 26 mm |
375AB04 | 69 - 90 mm | 252 mm | 90 mm | 215 mm | 15 mm | 134 - 185 mm | 29 mm | 72 mm | 30 mm |
375AB05 | 90 - 118 mm | 321 mm | 100 mm | 270 mm | 15 mm | 180 - 250 mm | 27 mm | 89 mm | 33 mm |
375AB06 | 118 - 150 mm | 400 mm | 110 mm | 340 mm | 15 mm | 221 - 310 mm | 37 mm | 110 mm | 40 mm |
Note: All sizes have stud clearance holes of 15.5mm, allowing fixing sizes M10, M12 & M14 to be used. |
![]() * Technical Data Subject to change without notice. |