Prysmian BICON Industrial Cable Jointing Kits - MPJEM-U Series (Low Voltage) (MPJEMJ1U, MPJEMJ2U, MPJEMJ3U, MPJEMJ4U, MPJEMJ5U, MPJEMJ6U, MPJEMJ7U, MPJEMJ8U)
Prysmian BICON Industrial Cable Jointing Kits - MPJEM-U Series (Low Voltage) (MPJEMJ1U, MPJEMJ2U, MPJEMJ3U, MPJEMJ4U, MPJEMJ5U, MPJEMJ6U, MPJEMJ7U, MPJEMJ8U)

Product overview

Prysmian BICON MPJEM-U Industrial Cable Joints (LV)

Prysmian BICON MPJEM-U Industrial Cable Joints (600/ 1000V) are straight joints for LV cables, suitable for use with un-armoured cables with polymeric insulation and copper conductors from with copper conductors from 1.5mm² to 300mm².
Part Numbers: MPJEMJ1U, MPJEMJ2U, MPJEMJ3U, MPJEMJ4U, MPJEMJ5U, MPJEMJ6U, MPJEMJ7U, MPJEMJ8U

  • Tested and approved to BS EN 50393 and ENATS TS C81/3.
  • Utilizes Prysmian’s Low hazard isocyanate free JEM resin.
  • Utilizes Compact joints shells which minimizes the joint footprint.
  • Requires compression connectors (sold separately).

Prysmian BICON Cable Joints

For many years, BICON has been in the forefront of jointing technology, from designs using bituminous filling compounds, to the development of the highly successful BICAST acrylic resin joint system.

Most recently, we have supplemented these ranges with heat shrink and pre-moulded products (BIMOLD). We can now offer a unique package to satisfy all requirements.

All four systems are available at voltages up to or above 33 kV and, depending on application, each may offer benefits over the others.

For instance, termination of high voltage polymeric cables requiring the facility to disconnect or add in additional cables at a later stage, means that BIMOLD is the logical choice. Likewise, BICAST provides a fast, comprehensive joint method with a versatile range covering low and high voltage and all cable types.

Download PDF file for Prysmian BICON MPJEM-U Industrial Cable Joints (LV) Technical Data.

*Technical Data subject to change without notice. MPJEMJ1U, MPJEMJ3U, MPJEMJ5U

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

JOINT SELECTION
Nominal Conductor
Cross Section		 Two Core Three Core Four Core Five Core Connector
1.5 mm2 MPJEMJ1U MPJEMJ1U MPJEMJ1U MPJEMJ2U BERS
2.5 mm2 MPJEMJ1U MPJEMJ1U MPJEMJ1U MPJEMJ2U BEBS
4 mm2 MPJEMJ1U MPJEMJ1U MPJEMJ1U MPJEMJ4U BEYS/ BT6CS
6 mm2 MPJEMJ1U MPJEMJ2U MPJEMJ2U MPJEMJ4U BT6CS
10 mm2 MPJEMJ2U MPJEMJ2U MPJEMJ2U MPJEMJ4U BT10CS
16 mm2 MPJEMJ2U MPJEMJ3U MPJEMJ3U MPJEMJ4U BT16CS
25 mm2 MPJEMJ3U MPJEMJ3U MPJEMJ3U MPJEMJ4U BT25CS
35 mm2 MPJEMJ3U MPJEMJ4U MPJEMJ4U MPJEMJ5U BT35CS
50 mm2 MPJEMJ4U MPJEMJ4U MPJEMJ4U MPJEMJ5U BT50CS
70 mm2 MPJEMJ4U MPJEMJ4U MPJEMJ5U MPJEMJ5U BT70CS
95 mm2 MPJEMJ4U MPJEMJ5U MPJEMJ5U BT95CS
120 mm2 MPJEMJ5U MPJEMJ6U MPJEMJ6U BT120CS
150 mm2 MPJEMJ5U MPJEMJ6U MPJEMJ6U BT150CS
185 mm2 MPJEMJ5U MPJEMJ6U MPJEMJ6U BT185CS
240 mm2 MPJEMJ6U MPJEMJ7U MPJEMJ7U BT240CS
300 mm2 MPJEMJ6U MPJEMJ7U MPJEMJ7U BT300CS
*400 mm2 MPJEMJ8U MPJEMJ8U MPJEMJ8U BT400CS

 

*: Does not accomodate cross core (phase to phase) jointing
Note: Unarmoured cables have varying constructions so it is advisable to check the cable O/D with the table above, MPJEM-U joints are provided without connectors, compression connectors can be provided separately.

SHELL DIMENSIONS
Joint Reference Min Box Entry ØA (mm) Max Box Entry ØB (mm) Box Length C (mm) Internal ØD (mm)
MPJEMJ1U 12 26 185 32 
MPJEMJ2U 14 32 245 43 
MPJEMJ3U 23 39 325 44 
MPJEMJ4U 28 50 375 65 
MPJEMJ5U 32 58 520 99 
MPJEMJ6U 45 75 705 124 
MPJEMJ7U 40 89 862 140 
MPJEMJ8U 57 95 900 154 

Find out more about our products or becoming a supplier