Nexans Euromold 670AR-2 Equipment Bushing
Product overview
Nexans Euromold 670AR-2 Equipment Bushing
Nexans Euromold 670AR-2/ K670AR-2 Equipment Bushings are MV-HV Bushings for use in equipment insulated with oil fluid, typically for transformers, switchgear, capacitors that are specified to terminate and connect medium/high voltage cables in the following voltage classes:
- 6/10 (12kV)
- 6.35/11 (12kV)
- 8.7/15 (17.5kV)
- 12/20 (24kV)
- 12.7/22 (24kV)
Technical Characteristics
- Each bushing is tested for AC withstand and partial discharge prior to leaving the factory.
- The plug-in type equipment bushings are moulded epoxy insulated parts and meet the requirements of CENELEC EN 50180 and IEC 60137.
Specification & Design
To order the equipment bushing, specify the type. The bushings can be supplied with an earth jumper (/J) or an earth plate (/GS). This earth connection must be specified when ordering (e.g. K670AR-2/GS):
| Euromold Equipment Bushing Type |
Voltage Um |
Current Ir |
| 670AR-2 | 12 kV | 1250 Amps |
| K670AR-2 | 24 kV | 1250 Amps |
Note: For dimensions of the above bushing types, refer to the Technical Data Table below.
Nexans Euromold 670AR-2 Fixings for Bushings
For additional General and Technical Information on Nexans Euromold K670AR-2 Equipment Bushings, download PDF File or check the Design Image above.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929