Prysmian BICON E1W-XL Cable Gland (474SW)
Product overview
Prysmian BICON E1W-XL Cable Gland (474SW Series) is a brass indoor and outdoor cable gland for use in hazardous locations. Universal Gland suitable for use with steel wire armour, braid wire armoured and lead sheathed cables.
Part Numbers: 474SW-71, 474SW-52, 474SW-53, 474SW-55, 474SW-56, 474SW-57, 474SW-58, 474SW-59, 474SW-60, 474SW-61, 474SW-62, 474SW-63, 474SW-64.
Prysmian 474SW Features
- Brass indoor and outdoor cable gland for use in hazardous areas.
- Suitable for circular, galvanized steel wire armour cables with extruded polymeric bedding and oversheath.
- Suitable for circular, Braid wire armour cables with extruded polymeric bedding and oversheath.
- Achieves IP67 and deluge proof (DTS01:1991) seal onto cable and to enclosure with suitable sealing washer or thread sealant.
- Three part armour lock provides mechanical cable retention and electrical continuity.
- Continuity Connection for Lead Inner sheathed cables.
- Inner PCP seal grips cable bedding and provides additional ingress protection.
- Suitable for most climatic conditions – weatherproof and waterproof.
- Standard and Nickel plated versions available.
- Full installation instructions supplied.
Technical Data
- Certified II 2GD, Ex e II & Ex d IIC under ATEX directive 94/9/EC.
- Atex Compliance Standards: EN 60079-0, EN 60079-1, EN 60079-7, EN 61241-0, EN 61241-1.
- Certificate number Sira 02ATEX3093X.
- IECEx Compliance Standards: IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0, IEC 61241-1.
- Certificate number IECEx SIR 10.0070X
- Service temperature range -60°C to +90°C.
Additional Information
May be used in:
- Zones 0 , 1 & 2 with Ex ia IIA , B & C equipment.
- Zones 1 & 2 with Ex ib IIA , B & C equipment.
- Zones 1 & 2 with Ex e II equipment.
- Zone 2 with Ex nA II equipment.
- Zones 21 & 22 with Ex tD A21.
Where the cable is effectively filled, may also be used in:
- Zones 1 & 2 with Ex d IIC equipment not containing a source of ignition & with a volume less than 2000 cm3.
- Zones 1 & 2 with Ex d IIA & Ex d IIB equipment not containing a source of ignition & with any volume.
- Zone 1 with Ex d IIA & Ex d IIB equipment containing a source of ignition & with a volume less than 2000 cm.
- Zone 2 with Ex d IIA & Ex d IIB equipment containing a source of ignition & with any volume.
- Zone 2 with Ex nR II equipment.
For more information on Prysmian BICON E1W-XL Cable Gland (474SW Series), please consult Datasheet below.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
Interested in this Product?
+44 (0)1744 762 929Technical Data
| Design Reference (Standard) | Design Reference (Nickel Plated) | Size (Metric) | Under Armour Min Ø (A) | Under Armour Max Ø (A) | Overall Ø (B) Min | Overall Ø (B) Max | Armour Wire Ø | Braid Armour Wire Ø | Lead Sheath Ø Min | Lead Sheath Ø Max | Entry Thread (D) | Thread Length (E) | Protrusion Length (F) | Hexagon A/F (G) | Hexagon A/C (H) |
| 474SW-71 | 474SW-71V | 20SS | 3.8 | 8.7 | 8.0 | 13.2 | 0.9 | 0.2/0.3 | 3.0 | 8.0 | M20 x 1.5 | 15 | 41 | 23.4 | 26.7 |
| 474SW-52 | 474SW-52V | 20S | 8.0 | 11.8 | 8.0 | 15.8 | 0.9/1.25 | 0.2/0.3 | 4.0 | 12.0 | M20 x 1.5 | 15 | 43 | 25.7 | 29.2 |
| 474SW-53 | 474SW-53V | 20 | 11.8 | 14.2 | 11.7 | 20.8 | 0.9/1.25 | 0.2/0.3 | 7.0 | 14.0 | M20 x 1.5 | 15 | 43 | 30.5 | 34.0 |
| 474SW-55 | 474SW-55V | 25 | 14.0 | 20.1 | 17.0 | 27.2 | 1.25/1.6 | 0.2/0.45 | 10.0 | 20.0 | M25 x 1.5 | 15 | 48 | 37.6 | 42.2 |
| 474SW-56 | 474SW-56V | 32 | 19.7 | 26.6 | 23.5 | 33.5 | 1.6/2.0 | 0.3/0.45 | 15.0 | 26.0 | M32 x 1.5 | 15 | 53 | 47.2 | 53.6 |
| 474SW-57 | 474SW-57V | 40 | 26.6 | 32.4 | 29.0 | 39.9 | 1.6/2.0 | 0.3/0.45 | 20.0 | 32.0 | M40 x 1.5 | 15 | 56 | 56.4 | 61.5 |
| 474SW-58 | 474SW-58V | 50S | 32.4 | 38.4 | 38.0 | 46.2 | 2.0/2.5 | 0.3/0.45 | 24.0 | 38.0 | M50 x 1.5 | 15 | 61 | 60.0 | 66.0 |
| 474SW-59 | 474SW-59V | 50 | 38.4 | 44.3 | 39.5 | 52.6 | 2.0/2.5 | 0.3/0.45 | 29.0 | 44.0 | M50 x 1.5 | 15 | 61 | 70.1 | 77.2 |
| 474SW-60 | 474SW-60V | 63S | 44.3 | 50.3 | 50.0 | 58.9 | 2.5 | 0.3/0.45 | 34.0 | 50.0 | M63 x 1.5 | 15 | 64 | 75.0 | 83.0 |
| 474SW-61 | 474SW-61V | 63 | 50.3 | 56.2 | 51.3 | 65.3 | 2.5 | 0.3/0.45 | 42.0 | 56.0 | M63 x 1.5 | 15 | 64 | 80.0 | 87.4 |
| 474SW-62 | 474SW-62V | 75S | 56.2 | 62.2 | 62.0 | 71.6 | 2.5 | 0.3/0.45 | 49.0 | 62.0 | M75 x 1.5 | 15 | 73 | 90.2 | 99.1 |
| 474SW-63 | 474SW-63V | 75 | 62.2 | 68.1 | 62.5 | 78.0 | 2.5 | 0.3/0.45 | 55.0 | 68.0 | M75 x 1.5 | 15 | 73 | 98.8 | 109.2 |
| 474SW-64 | 474SW-64V | 85 | 68.0 | 74.0 | 68.0 | 88.0 | 3.2 | 0.3/0.45 | 63.0 | 72.0 | M85 x 2 | 20 | 102 | 115.1 | 126.0 |
Technical Information
- Certified II 2GD, Ex e II & Ex d IIC under ATEX directive 94/9/EC.
- Atex Compliance Standards: EN 60079-0, EN 60079-1, EN 60079-7, EN 61241-0, EN 61241-1.
- Certificate number Sira 02ATEX3093X.
- IECEx Compliance Standards: IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0, IEC 61241-1.
- Certificate number IECEx SIR 10.0070X
- Service temperature range -60°C to +90°C.
Additional Information
May be used in:
- Zones 0 , 1 & 2 with Ex ia IIA , B & C equipment.
- Zones 1 & 2 with Ex ib IIA , B & C equipment.
- Zones 1 & 2 with Ex e II equipment.
- Zone 2 with Ex nA II equipment.
- Zones 21 & 22 with Ex tD A21.
Where the cable is effectively filled, may also be used in:
- Zones 1 & 2 with Ex d IIC equipment not containing a source of ignition & with a volume less than 2000 cm3.
- Zones 1 & 2 with Ex d IIA & Ex d IIB equipment not containing a source of ignition & with any volume.
- Zone 1 with Ex d IIA & Ex d IIB equipment containing a source of ignition & with a volume less than 2000 cm.
- Zone 2 with Ex d IIA & Ex d IIB equipment containing a source of ignition & with any volume.
- Zone 2 with Ex nR II equipment.