CCG FLP Hose Single Compression Cable Gland (0527)
CCG FLP Hose Single Compression Cable Gland (0527)

Product overview

CCG FLP Hose Single Compression Cable Gland (0527)

CCG FLP Hose Single Compression Cable Gland (0527) is a Hazardous Area Glanding Device for Unarmoured Cable. Suitable for Group I underground mines, Group II, III, Zone 1, 2, 21 and 22 hazardous areas.

CCG Part Numbers: 052700-16, 052700, 0527-0, 052701, 052702, 052703, 052704, 052755, 052705, 052765, 052706, 052707

Features & Benefits

  • For Group I underground mines, Group II, III, Zone 1, 2, 21 and 22 hazardous areas.
  • Fitted complete with a specially formulated elastomeric captive seal for Built-in Safety™.
  • A hose tail provides for clamping a protective hose over the cable.
  • Precision manufactured from high-quality brass (Marine Grade Electroless Nickel Plated™) available in stainless steel 316/316L on request.
  • Supplied with a thread sealing gasket (parallel threads only).

CCG FLP Hose Technical Data

Type: FLP Hose
Equipment Protection Levels: Ex db I/IIC, Ex eb I/IIC, Ex ta IIIC, Ex nR IIC
Gland Material: Brass (Marine Grade Electroless Nickel Plated™), Stainless Steel 316/316L
Seal Material: Thermoset Elastomer Standard or Extreme Temperature Seals
Sealing Gasket Material: HDPE, Nylon 66 or PTFE
Cable Type: Unarmoured
Sealing Area: Outer Sheath
Optional Accessories: Adaptor, Reducer and Shroud

Note: The installer should ensure that the materials are suitable for the installation environment.

Installation Standards

  • IEC/BS EN
  • IECEx
  • ATEX
  • UKEX
  • INMETRO (Brazil)
  • TR CU (Russia)
  • SANS
  • Ingress Protection
  • Deluge Protection
  • Corrosion Protection
  • Marine ABS
  • DNV-GL

Hazardous Areas

A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such locations are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.

Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.

Additional Technical Data on CCG FLP Hose Single Compression Cable Gland (0527) Part Numbers can be found on the table below. For Conforming Standards & Certificates as well as Fitting Instructions, please advise PDF File.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Product Code Gland Size Ref. Metric Entry Thread (C) Metric Entry Thread (Min D) NPT Entry Thread (C) NPT Entry Thread (Min D) Cable Detail (Min A) Cable Detail (Max A) To Suit Hose Size (Nom) (Metric B) To Suit Hose Size (Nom) (Imperial B) Max Length (E) Coupler Length (Min F) Max Overall Length  (G) Hexagonal Detail (Max Flats) Hexagonal Detail (Max Crns) Installation Torque Value (Nm)
052700-16 00-16ss M20x1.5 15 - - 3 8 15 - 46 25 86 25 28 35
052700 00-20ss M20x1.5 15 ½/¾ 15 3 8 15 - 46 25 86 25 28 35
0527-0 0-20s M20x1.5 15 ½/¾ 15 8 11.5 15 ½ 46 25 86 25 28 35
052701 1-20 M20x1.5 15 ½/¾ 15 11 14.5 17.5 ¾ 48 25 86 27 30 35
052702 2-25 M25x1.5 15 ¾/1 15/19 14 20.2 25.9 1 60 25 100 40 45 50
052703 3-32 M32x1.5 15 1/1¼ 19 20 26.5 32.2 1¼ 76 30 120 45 51 70
052704 4-40 M40x1.5 15 1¼/1½ 19/21 26.5 34 39.2 1½ 84 35 140 55 62 90
052755 5s-50s M50x1.5 15 1½/2 21 32.5 38 45 1¾ 90 40 150 70 79 100
052705 5-50 M50x1.5 15 1½/2 21 38 44.5 51 2 90 40 150 70 79 100
052765 6s-63s M63x1.5 15 2/2½ 21/30 44.5 50 63 2¼ 96 45 160 85 96 120
052706 6-63 M63x1.5 15 2/2½ 21/30 50 56 63 2½ 96 45 160 85 96 120
052707 7-75 M75x1.5 15 2½/3 30/32 56 65 76.2 3 105 50 170 96 108 120

All dimensions except NPT are in mm. Intermediate thread sizes are available on request. NPT threads should be tightened “wrench tight”.

 

Find out more about our products or becoming a supplier