CCG A2EX-FHC Double Compression Cable Gland (0537)
CCG A2EX-FHC Double Compression Cable Gland (0537)

Product overview

CCG A2EX-FHC Double Compression Cable Gland (0537)

CCG A2EX-FHC Double Compression Cable Gland (0537) is a Hazardous Area Glanding Device for Unarmoured Cable Housed In Conduit. Suitable for indoors, outdoors, Group II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.

CCG Part Numbers: 053700-16, 053700, 0537-0, 053701, 053722, 053702, 053733, 053703, 053744, 053704, 053755, 053705, 053766, 053706, 053777, 053707, 053708, 053799, 053709, 053710

Features & Benefits

  • For indoors, outdoors, Group II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.
  • For use with all types of unarmoured cable housed in rigid or flexible conduit.
  • Harder outer seal grips the cable giving superior cable retention and IP rating.
  • Fitted with a rotating female conduit coupler.
  • Factory fitted with a specially formulated elastomeric seal for Built-in Safety™, seals on the inner sheath of the cable.
  • Precision manufactured from high-quality brass (Marine Grade Electroless Nickel Plated™) available in stainless steel 316/316L on request.
  • Supplied with a thread sealing gasket (parallel threads only).

CCG A2EX-FHC Technical Data

Type: A2EX-FHC
Equipment Protection Levels: Ex db IIC, Ex eb IIC, Ex ta IIIC, Ex nR IIC
Gland Material: Brass (Marine Grade Electroless Nickel Plated™), Stainless Steel 316/316L
Seal Material: Standard Thermoset Elastomer or Extreme Temperature Seals
Sealing Gasket Material: HDPE, Nylon 66 or PTFE
Cable Type: Unarmoured Housed in Conduit
Sealing Area: Inner Sheath
Optional Accessories: Adaptor, Reducer, Earth Tag, Locknut, Serrated Washer and Shroud

Note: The installer should ensure that the materials are suitable for the installation environment.

Installation Standards

  • IEC/BS EN
  • IECEx
  • ATEX
  • UKEX
  • INMETRO (Brazil)
  • TR CU (Russia)
  • CCC/CNEx (China)
  • KCs (Korea)
  • SANS
  • Ingress Protection
  • Deluge Protection
  • Corrosion Protection
  • Marine ABS
  • DNV-GL
  • EMC Compatible

Hazardous Areas

A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such locations are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.

Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.

Additional Technical Data on CCG A2EX-FHC Double Compression Cable Gland (0537) Part Numbers can be found on the table below. For Conforming Standards & Certificates as well as Fitting Instructions, please advise PDF File.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Product Code Gland Size Ref. Metric Entry Thread (C) Metric Entry Thread (Min D) NPT Entry Thread (C) NPT Entry Thread (Min D) Cable Detail (Min B) Cable Detail (Max B) Max Length (E) Female Conduit Thread (Metric G) Female Conduit Thread (NPT G) Hexagonal Detail (Max Flats) Hexagonal Detail (Max Crns) Installation Torque Value (Nm)
053700-16 00-16ss M16x1.5 15 - - 3 8.5 57 M16-M25 - 24 27 32.5
053700 00-20ss M20x1.5 15 ½/¾ 15 3 8.5 57 M16-M25 ½/¾ 24 27 32.5
0537-0 0-20s M20x1.5 15 ½/¾ 15 7 12 57 M16-M25 ½/¾ 24 27 32.5
053701 1-20 M20x1.5 15 ½/¾ 15 11 15 64 M16-M25 ½/¾ 27 30 32.5
053722 2s-25s M25x1.5 15 ¾/1 15/19 11.5 17.5 71 M25 ¾/1 35 39 47.5
053702 2-25 M25x1.5 15 ¾/1 15/19 15 20 71 M25 ¾/1 35 39 47.5
053733 3s-32s M32x1.5 15 1/1¼ 19 16 22 85 M32 1/1¼ 42 47 55
053703 3-32 M32x1.5 15 1/1¼ 19 20 26.5 85 M32 1/1¼ 42 47 55
053744 4s-40s M40x1.5 15 1¼/1½ 19/21 22 31.5 102 M40 1¼/1½ 52 59 65
053704 4-40 M40x1.5 15 1¼/1½ 19/21 26 34 102 M40 1¼/1½ 52 59 65
053755 5s-50s M50x1.5 15 1½/2 21 29 38 112 M50 1½/2 65 73 82.5
053705 5-50 M50x1.5 15 1½/2 21 34 44.5 112 M50 1½/2 65 73 82.5
053766 6s-63s M63x1.5 15 2/2½ 21/30 38 50 144 M63 2/2½ 80 90 97.5
053706 6-63 M63x1.5 15 2/2½ 21/30 44.5 56.5 144 M63 2/2½ 80 90 97.5
053777 7s-75s M75x1.5 15 2½/3 30/32 50 62 164 M75 2½/3 96 108 115.5
053707 7-75 M75x1.5 15 2½/3 30/32 56 67.5 164 M75 2½/3 96 108 115.5
053708 8-80 M80x2.0 20 3 32 59 69 175 M80 3 96 108 120
053799 9s-90s M90x2.0 20 3/3½ 32/33 60 75 184 M90 3/3½ 111 125 120
053709 9-90 M90x2.0 20 3/3½ 32/33 73 81.5 184 M90 3/3½ 111 125 120
053710 10-100 M100x2.0 20 3/3½/4 33/34 81 92 189 M100 3/3½/4 125 141 120

All dimensions except NPT are in mm. Male Entry Thread ‘C’ and Female Entry Thread ‘B’ can only be any combination of either NPT or Metric threads.
Intermediate thread sizes are available on request. NPT threads should be tightened ‘wrench tight’.

 

Find out more about our products or becoming a supplier