CCG CWe Deluge Seal Cable Gland (0557)
CCG CWe Deluge Seal Cable Gland (0557)

Product overview

CCG CWe Deluge Seal Cable Gland (0557)

CCG CWe Deluge Seal Cable Gland (0557) is a Hazardous Area Glanding Device for Steel Wire and Aluminium Armour Cable. Suitable for indoor, outdoor, Group II and III, Zone 1, 2, 20, 21 and 22 hazardous areas.

CCG Part Numbers: 055700-16, 055700, 0557-0-16, 0557-0, 055701, 055722, 055702, 055733, 055703, 055744, 055704, 055755, 055705, 055766, 055706, 055777, 055707, 055788, 055708, 055799, 055709, 055710, 055711, 055712, 055713

Features & Benefits

  • For indoor, outdoor, Group II and III, Zone 1, 2, 20, 21 and 22 hazardous areas.
  • Two-piece handling, no loose parts. Freely rotating captive cone and inspectible cone ring provides an armour clamp and earth bond without twisting the armouring.
  • With a patented Variable Deluge Seal™ as standard.
  • Provides a seal on the outer sheath of the cable sealing to IP68.
  • Patented disconnect armoured clamp system for ease of inspection.
  • Precision manufactured from high-quality brass (Marine Grade Electroless Nickel Plated™) available in aluminium or stainless steel 316/316L on request.
  • Supplied with a thread sealing gasket (parallel threads only).

CCG CWe Technical Data

Type: CWe
Equipment Protection Levels: Ex eb IIC, Ex ta IIIC
Gland Material: Brass (Marine Grade Electroless Nickel Plated™), Aluminium ASTM B221, Stainless Steel 316/316L
Seal Material: Thermoset Elastomer or Silicon on request
Sealing Gasket Material: HDPE, Nylon 66 or PTFE
Cable Type: Steel Wire Armour, Aluminium Armour Wire
Armour Clamping: Rotating Captive Cone and Inspectible Cone Ring
Sealing Area: Outer Sheath and Variable Deluge Seal™
Optional Accessories: Adaptor, Reducer, Earth Tag, Locknut, Serrated Washer and Shroud

Note: The installer should ensure that the materials are suitable for the installation environment.

Installation Standards

  • IEC/BS EN
  • IECEx
  • ATEX
  • UKEX
  • INMETRO (Brazil)
  • TR CU (Russia)
  • SANS
  • Ingress Protection
  • Deluge Protection
  • Corrosion Protection
  • Marine ABS
  • DNV-GL
  • EMC Compatible

Hazardous Areas

A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such locations are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.

Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.

Additional Technical Data on CCG CWe Deluge Seal Cable Gland (0557) Part Numbers can be found on the table below. For Conforming Standards & Certificates as well as Fitting Instructions, please advise PDF File.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Product Code Gland Size Ref. Metric Entry Thread (C) Metric Entry Thread (Min D) NPT Entry Thread (C) NPT Entry Thread (Min D) Cable Detail (Max A) Cable Detail (Min B) Cable Detail (Max B) Max Length (E) Armour Dia (Min F) Armour Dia (Max F) Hexagonal Detail (Max Flats) Hexagonal Detail (Max Crns) Installation Torque Value (Nm)
055700-16 00-16ss M16x1.5 15 - - 8.5 8 13.5 41 0.90 0.90 24 27 35
055700 00-20ss M20x1.5 15 ½/¾ 15 8.5 8 13.5 41 0.90 0.90 24 27 35
0557-0-16 0-16s M16x1.5 15 ½/¾ 15 10.5 11.5 16 43 0.90 1.25 24 27 35
0557-0 0-20s M20x1.5 15 ½/¾ 15 12 11.5 16 43 0.90 1.25 24 27 35
055701 1-20 M20x1.5 15 ½/¾ 15 15 14.5 20.5 47 0.90 1.25 27 30 35
055722 2s-25s M25x1.5 15 ¾/1 15/19 17.5 16 24.5 56 1.25 1.60 35 39 50
055702 2-25 M25x1.5 15 ¾/1 15/19 20 20.5 26.5 56 1.25 1.60 35 39 50
055733 3s-32s M32x1.5 15 1/1¼ 19 22 23 30.5 57 1.60 2.00 42 47 70
055703 3-32 M32x1.5 15 1/1¼ 19 26.5 26.5 33.5 57 1.60 2.00 42 47 70
055744 4s-40s M40x1.5 15 1¼/1½ 19/21 31.5 30 39.5 68 1.60 2.00 52 59 90
055704 4-40 M40x1.5 15 1¼/1½ 19/21 34 33 42.5 68 1.60 2.00 52 59 90
055755 5s-50s M50x1.5 15 1½/2 21 38 34 47.5 72 2.00 2.50 65 73 100
055705 5-50 M50x1.5 15 1½/2 21 38/44.5 42.5 52.5 72 2.00 2.50 65 73 100
055766 6s-63s M63x1.5 15 2/2½ 21/30 50 45.5 60.5 89 2.00 2.50 80 90 120
055706 6-63 M63x1.5 15 2/2½ 21/30 50/56.5 52.5 65.5 89 2.00 2.50 80 90 120
055777 7s-75s M75x1.5 15 2½/3 30/32 62 57 72.5 97 2.50 3.15 96 108 120
055707 7-75 M75x1.5 15 2½/3 30/32 62/67.5 65.5 78 97 2.50 3.15 96 108 120
055788 8s-80s M80x2.0 20 3 32 69 65 77.5 98 2.50 3.15 96 108 120
055708 8-80 M80x2.0 20 3 32 74 78 82 98 2.50 3.15 96 108 120
055799 9s-90s M90x2.0 20 3/3½ 32/33 75 73 86.5 123 3.00 3.50 111 125 120
055709 9-90 M90x2.0 20 3/3½ 32/33 75/81.5 82 91 123 3.00 3.50 111 125 120
055710 10-100 M100x2.0 20 3½/4 33/34 91 90 100 124 3.00 3.50 125 141 120
055711 11-115 M115x2.0 20 4 34 98 100 114 134 3.00 4.00 135 152 120
055712 12-120 M120x2.0 20 - - 103 103 118 136 3.00 4.00 140 158 120
055713 13-130 M130x2.0 20 - - 115 113 124 140 3.00 4.00 146 164 120

All dimensions except NPT are in mm. Intermediate thread sizes are available on request. NPT threads should be tightened ‘wrench tight’.

 

Find out more about our products or becoming a supplier