CCG Ex Corrosion Guard Cable Gland (0547)

Product overview

CCG Ex Corrosion Guard Cable Gland (0547)

CCG Ex Corrosion Guard Cable Gland (0547) is a Hazardous Area Glanding Device for Steel Wire and Aluminium Armoured Cable. Suitable for highly corrosive, wet locations, Group II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.

CCG Part Numbers: 054700-16, 054700, 0547-0, 054701, 054722, 054702, 054733, 054703, 054744, 054704, 054755, 054705, 054766, 054706, 054777, 054707, 054708, 054799, 054709, 054710

Features & Benefits

  • For highly corrosive, wet locations, Group II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.
  • Factory fitted captive elastomeric seals for Built-in Safety™.
  • Two-part handling, freely rotating captive cone and inspectible cone ring provides an armour clamp and earth bond on steel wire and aluminium armour.
  • Corrosion Guard® screws onto the gland body and seals over the outer sheath of the cable giving an IP68 and deluge proof seal protecting the armour and metal parts of the gland.
  • Precision manufactured from high-quality brass (Marine Grade Electroless Nickel Plated™).
  • Supplied with a thread sealing gasket (parallel threads only).

CCG Ex Corrosion Guard Technical Data

Type: Ex Corrosion Guard
Equipment Protection Levels: Ex db IIC, Ex eb IIC, Ex ta IIIC, Ex nR IIC
Gland Material: Brass (Marine Grade Electroless Nickel Plated™)
Corrosion Guard Material: Glass Reinforced Polyester Compound / PBT
Seal Material: Standard Thermoset Elastomer
Sealing Gasket Material: HDPE, Nylon 66 or PTFE
Cable Type: Steel Wire, Aluminium Armour
Armour Clamping: Captive Rotating Cone and Inspectible Cone Ring
Sealing Area: Inner Sheath, Outer Sheath and total enclosure of gland
Optional Accessories: Adaptor, Reducer, Locknut and Serrated Washer

Note: The installer should ensure that the materials are suitable for the installation environment.

Installation Standards

  • IEC/BS EN
  • IECEx
  • ATEX
  • UKEX
  • INMETRO (Brazil)
  • TR CU (Russia)
  • SANS
  • Ingress Protection
  • Deluge Protection
  • Corrosion Protection
  • Marine ABS
  • DNV-GL
  • EMC Compatible

Hazardous Areas

A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such locations are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.

Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.


Additional Technical Data on CCG Ex Corrosion Guard Cable Gland (0547) Part Numbers can be found on the table below. For Conforming Standards & Certificates as well as Fitting Instructions, please advise PDF File.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Product Code Gland Size Ref. Metric Entry Thread (C) Metric Entry Thread (Min D) Cable Detail (Min A) Cable Detail (Max A) Cable Detail (Min B) Cable Detail (Max B) Max Length (E) Armour Dia (Min F) Armour Dia (Max F) Max Dia (G) Hexagonal Detail (Max Flats) Hexagonal Detail (Max Crns) Installation Torque Value (Nm)
054700-16 00-16ss M16x1.5 15 3 8.5 8 13.5 46 0.20 0.90 33 24 27 21
054700 00-20ss M20x1.5 15 3 8.5 8 13.5 46 0.20 0.90 33 24 27 21
0547-0 0-20s M20x1.5 15 7 12 11.5 16 46 0.20 1.25 33 24 27 21
054701 1-20 M20x1.5 15 9 15 14.5 20.5 51 0.20 1.25 36 27 30 21
054722 2s-25s M25x1.5 15 11 17 16 24.5 58 0.20 1.60 46 35 39 30
054702 2-25 M25x1.5 15 14 20 20.5 26.5 58 0.20 1.60 46 35 39 30
054733 3s-32s M32x1.5 15 15 22 23 30.5 67 0.20 2.00 53 42 47 42
054703 3-32 M32x1.5 15 19 26.5 26.5 33.5 67 0.20 2.00 53 42 47 42
054744 4s-40s M40x1.5 15 22 31.5 30 39.5 74 0.30 2.00 68 52 59 52
054704 4-40 M40x1.5 15 26 34 33 42.5 74 0.30 2.00 68 52 59 52
054755 5s-50s M50x1.5 15 29 38 34 47.5 89 0.40 2.50 84 65 73 57
054705 5-50 M50x1.5 15 34 44.5 42.5 52.5 89 0.40 2.50 84 65 73 57
054766 6s-63s M63x1.5 15 38 50 45.5 60.5 102 0.40 2.50 110 80 90 66
054706 6-63 M63x1.5 15 44 56.5 52.5 65.5 102 0.40 2.50 110 80 90 66
054777 7s-75s M75x1.5 15 50 62 57 72.5 106 0.40 3.15 124 96 108 72
054707 7-75 M75x1.5 15 56 67.5 65.5 78 106 0.40 3.15 124 96 108 72
054708 8-80 M80x2.0 20 59 69 65 77.5 117 2.50 3.15 124 96 108 80
054799 9s-90s M90x2.0 20 66 75 73 86.5 117 3.00 3.50 124 111 125 89
054709 9-90 M90x2.0 20 74 81.5 82 91 117  3.00 3.50 140 111 125 89
054710 10-100 M100x2.0 20 81 91 90 100 117  3.00 3.50 140 125 141 98

All dimensions are in mm. Intermediate thread sizes are available on request.

 

Find out more about our products or becoming a supplier