Elpress Accessories for crimping Al with T2600, V600, V611 and PVX611

Product overview

Elpress Accessories (Punch and Matrix) for crimping Al with tool types T2600, V600, V611, PVL611 and PVX611 for Cu Terminals, Al Terminals and C-sleeves. elpress TP13M

Note that KRF Terminals may be used on flexible (IEC60228, class 5) as well as stranded (class 2) conductors and that KRD and KRT Terminals are used on stranded conductors.

Be sure to use dies exactly matching the terminals.

Elpress Accessories

Punch and Matrix for Al

For Al-Terminals, indent crimping. Not used for pre-rounding.

Crimp Dies for Al and Cu

For crimping 16-25mm² Al and 10-16mm² Cu. Rotatable die, one side for crimping for crimping Aluminium and the other for crimping copper. Used in the V600 System.

Punch crimping. The dies below are intented to be used together with Al/ Cu Conductors according to IEC 60228.

General Information

SYSTEM ELPRESS
System Elpress consists of Terminals and Tools that are designed and tested together to give a certified crimping result. This ensures that users will feel confident when using our systems, and that a secure connection is achieved through the proper handling of our products.

HYDRAULIC CRIMP SYSTEMS
Elpress hydraulic crimp systems fit Elpress terminals and connectors from 10 to 1200 mm². The systems consist of pumps and crimp heads that can be freely combined or with complete hand-held tools, where these functions are intergrated. Wide range of accessories available for crimping, prerounding of sectorised conductors, cable cutting, etc. Together with the matching terminals the complete crimping system is formed. Both pumps and hand tools, with a few exceptions, have a quick feed function. This means that crimping can begin after a few pump strokes and after the dies have been brought in contact with the terminal. The systems also have a built-in ratchet lock, which ensures that an initial crimp is completed and thus produces the best possible results. Pumps that can be connected to a variety of different crimp heads offer versatility and provide maximum comfort and flexibility when working in tight spaces and demanding areas.

CU TERMINALS
The V1300 System is used for crimping Cu Terminals 10-400mm². An open-head C version is also available for better access in confined spaces.
The V250 System is used for crimping Cu Terminals 10-800mm².

AL TERMINALS
The V1300 System is used for the indent crimping of Al Terminals and pre-rounding of Al Conductors 16-240mm². Round crimping is carried out on sector-shaped Al Conductors.
The V250 System is used for indent crimping Al Terminals and pre-rounding Al Conductors 16-630mm². Round crimping is carried out on sector-shaped Al Conductors.

For more information on Elpress Accessories (Punch and Matrix) for crimping Al with T2600, V600, V611 and PVX611, consult PDF File or Technical Data Table below.  elpress TP13M

*Technical Data subject to change without notice.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929