Elpress CT20 Cable Cutting Tool (up to Ø 20mm)

Product overview

Elpress CT20 Cutting Tool (up to Ø 20mm) is a cable cutter for Cu and Al cables up to outer Ø 20mm. The cutting capacity of any cutting tool may vary due to conductor design, insulation thickness, hardness of materials, etc.
EAN Code: 7393487026759

Elpress CT20 Features

• Cuts Cu and Al cables up to outer Ø 20mm
• Not designed to cut steel
• Relatively small and handy
• Design of the blade inserts provides a clean cut surface
• Tempered forged steel cutting blade

General Information

STRIPPING TOOLS
To strip insulation from cable there are, for example the EMBLA, TOR and ODEN ranges, that strip from 0.02 mm² up to 40 mm² (approximately). The tools are characterised by high precision, ergonomic adaptation, user friendliness and reliability.

CUTTING TOOLS
Tools are available in several variants for cutting Cu and Al cable up to approximately Ø 85 mm. In addition to the simple mechanical tools that cut cables up to Ø 20 mm, there is a wide range of hydraulic tools for cutting cable up to approximately Ø 85 mm.

The size of the conductor that the tools can handle mainly depends on the type of conductor to cut; whether it is a low or medium voltage cable and whether it is, for example. a Solid Class 1, Flexible Class 5 or Stranded Class 2 Conductor. The hardness of the conductor’s material also affects the results. For example, the PCT54C is capable of cutting type Cu FKKJ 4 x 95 mm² low voltage cable or Al AKKJ 4 x 240 mm² or medium voltage cable type Al AXLJ 3 x 150 mm². The insulation takes some space on the medium voltage cable, which is why it can’t be restrictive.

For more information on Elpress CT20 Cable Cutting Tool (up to Ø 20mm), consult PDF File or Technical Data Table below.

*Technical Data subject to change without notice.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929