Elpress ISL2201 Holding Tool
Product overview
Elpress ISL2201 Holding Tool has been developed to support the Terminal or Connector while fastening the shear off screws. The tool is produced from high strength material and is easily adjusted for barrel sizes up to 400mm2. Weight: 365g
General Information
STRIPPING TOOLS
To strip insulation from cable there are the EMBLA, EMBLA RA, TOR and ODEN tools. They strip from approximately 0,02mm2 up to ∅ 40mm cable. The tools feature high precision, ergonomic adaptation, user friendliness and reliability.
CUTTING TOOLS
Tools are available in several variants for cutting Cu and Al cable up to approximately Ø 85mm. In addition to the simplest mechanical tools that cut cable up to Ø 20mm, there is a wide range of hydraulic tools for cutting cable up to approx 85mm.
The size of the conductor that the tools can handle mainly depends on the type of conductor to cut, whether it is a LV or MV cable and the class of the conductor. The hardness of the conductor’s material also affects the results. For example, the PKL54C is capable of cutting type Cu FKKJ 4 x 95 mm2 low voltage cable or Al AKKJ 4 x 240mm2 or MV cable type Al AXLJ 3 x 150mm2. The insulation takes some space on the medium voltage cable which is why it can be restrictive.
TOOLS FOR PEX CABLE
Finally, for the preparation of medium voltage cables, 12-24 kV and removal of conducting layers and PEX insulation, tools FBS1722 and FBS1723 are available.
For more information on Elpress ISL2201 Holding Tool, consult PDF File or Technical Data Table below.
*Technical Data subject to change without notice.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929