Elpress KR Copper Cable Lugs - DIN 46235 (10-300mm²) (KR16-8DIN, KR10-10DIN, KR120-20DIN)

Product overview

Elpress KRDIN Copper Cable Lugs – DIN 46235

Elpress KRDIN Copper Cable Lugs – DIN 46235 (6-1000mm²) are produced from electrolytic copper (Cu 99.95%) and are tin plated Cu/Sn. Dimensions are according to DIN 46235, the numbers of crimps indicated on the neck of the terminal. For crimping DIN 46235 terminals, use of diesaccording to DIN 48083.
Popular Part Numbers: KRDIN10-10, KRDIN16-8, KRDIN120-20

General Information

SYSTEM ELPRESS
System Elpress consists of Terminals and Tools that are designed and tested together to give a certified crimping result. This ensures that users will feel confident when using our systems, and that a secure connection is achieved through the proper handling of our products. By using Elpress Cu-Connection elements together with one of Elpress Crimp Systems one obtains a connection that has been tested according to the requirements of IEC 61238:1.

COPPER (CU) TERMINALS
Elpress Copper Connectors are made of pure Copper 99.95%. We manufacture Tube Terminals type KR/ KRF/ KRD/ KRT, Through Connectors type KS/ KSF/ KSD/ KST for stranded conductors, IEC 60228 Class 2, and flexible conductors IEC 60228 Class 5 such as C-Sleeves primarily pre-splicing of Cu-lines and many customised products. For flexible and stranded Cu conductors, terminals of type KR/ KRF and through connectors of type KS/ KSF are used. Terminals type KRD/ KRT and through connectors type KSD/ KST are normally used for stranded Cu conductors from and including 500mm2. Terminals of type KR/ KRF/ KRD/ KRT are used mainly in the splicing of copper conductors in cable assemblies. They can also be used for straight splicing of earth conductors. With a branching sleeve, type C, one splices and branches earth conductors, lightning conductor installations and the like.

UL-APPROVED TERMINALS
UL is an American standard which is also internationally accepted. Elpress standard Cu Terminals of types KR/ KS, KRF/ KSF, KRT/ KST, KRFS, KRFN are UL approved according to file no E205350.

DNV APPROVED
Elpress KR/ KS, KRF/ KSF and KRT/ KST Terminals meet DNV’s rules for classification of ships and Det Norske Veritas’ Offshore Standrards. The Terminals are approved for installations on ships and mobile offshore units.

NUMBER OF CRIMPS
Normally one crimp is required up to and including 150mm2 and 2 or 3 crimps for larger areas.Note, however, that another number of crimps may be needed in some cases, see table for tool dies. If possible, crimps should be placed next to each other with a couple of mm spacing between each one. Overlap is sometimes inevitable.

MARKING OF CU TERMINALS
Elpress marking system for Copper Terminals shows logotype, cable area and type number for hexagonal die. This system allows checks that the correct tools have been used when contact crimping because the die number automatically becomes embossed during the contact crimping.

For more information on Elpress KRDIN Copper Cable Lugs – DIN 46235 (KRDIN10-10, KRDIN16-8, KRDIN120-20), consult PDF File or Technical Data Table  below. KRDIN10-10, KRDIN16-8

*Technical Data subject to change without notice.

 

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

  • Material: Cu 99.95%, tin plated Cu/Sn.
  • Dimensions according to DIN 46235, number of crimps indicated on the neck of the terminal.
  • For crimping DIN 46235, use dies according to DIN 48083.
Cat. No. Area mm² AWG d D N N1 L W s t Screw Die no. Pcs/ Pack Rec. Tools
KRDIN6-5 6 10 3,8 5,5 7,5 7,5 31,5 8,5 10 1,5 M5 5DIN 100 V600, V1300
KRDIN6-6 6 10 3,8 5,5 9 9,5 33 8,5 10 1,5 M6 5DIN 100 V600, V1300
KRDIN6-8 6 10 3,8 5,5 10 10 35 13 10 1 M8 5DIN 100 V600, V1300
KRDIN10-5 10 8 4,5 6 7,5 7,5 34,5 9 10 1,5 M5 6DIN 100 V600, V1300
KRDIN10-6 10 8 4,5 6 9 9,5 36 9 10 1,5 M6 6DIN 100 V600, V1300
KRDIN10-8 10 8 4,5 6 10 10 37 13 10 1 M8 6DIN 100 V600, V1300
KRDIN10-10 10 8 4,5 6 10 11,5 39 15 10 0,8 M10 6DIN 100 V600, V1300
KRDIN16-6 16 6 5,5 8,5 9 9,5 45 13 20 2,5 M6 8DIN 100 V600, V1300
KRDIN16-8 16 6 5,5 8,5 11,5 11,5 47,5 13 20 2,5 M8 8DIN 100 V600, V1300
KRDIN16-10 16 6 5,5 8,5 13,5 13,5 49,5 17 20 1,9 M10 8DIN 100 V600, V1300
KRDIN16-12 16 6 5,5 8,5 13,5 13,5 52 18 20 1,8 M12 8DIN 100 V600, V1300
KRDIN25-6 25 4 7 10 9 9,5 47 14 20 3 M6 10DIN 100 V600, V1300
KRDIN25-8 25 4 7 10 11,5 11,5 49,5 16 20 2,5 M8 10DIN 100 V600, V1300
KRDIN25-10 25 4 7 10 13,5 13,5 51,5 17 20 2,4 M10 10DIN 100 V600, V1300
KRDIN25-12 25 4 7 10 14,5 14,5 52,5 19 20 2,1 M12 10DIN 100 V600, V1300
KRDIN35-6 35 2 8,2 12,5 7,5 8 49,5 17 20 4,1 M6 12DIN 100 V600, V1300
KRDIN35-8 35 2 8,2 12,5 11,5 11,5 53,5 17 20 4,1 M8 12DIN 50 V600, V1300
KRDIN35-10 35 2 8,2 12,5 13,5 13,5 55,5 19 20 3,7 M10 12DIN 50 V600, V1300
KRDIN35-12 35 2 8,2 12,5 14,5 14,5 56,5 21 20 3,3 M12 12DIN 50 V600, V1300
KRDIN50-6 50 1/0 10 14,5 11,5 11,5 63,5 20 28 4,3 M6 14DIN 50 V600, V1300
KRDIN50-8 50 1/0 10 14,5 11,5 11,5 63,5 20 28 4,3 M8 14DIN 50 V600, V1300
KRDIN50-10 50 1/0 10 14,5 13,5 13,5 65,5 22 28 3,9 M10 14DIN 50 V600, V1300
KRDIN50-12 50 1/0 10 14,5 14,5 14,5 66,5 24 28 3,6 M12 14DIN 50 V600, V1300
KRDIN50-16 50 1/0 10 14,5 17,5 17,5 69,5 28 28 3,1 M16 14DIN 50 V600, V1300
KRDIN70-6 70 2/0 11,5 16,5 11,5 11,5 66,5 24 28 4,5 M6 16DIN 25 V600, V1300
KRDIN70-8 70 2/0 11,5 16,5 11,5 11,5 66,5 24 28 4,5 M8 16DIN 25 V600, V1300
KRDIN70-10 70 2/0 11,5 16,5 13,5 13,5 68,5 24 28 4,5 M10 16DIN 25 V600, V1300
KRDIN70-12 70 2/0 11,5 16,5 14,5 14,5 69,5 24 28 4,5 M12 16DIN 25 V600, V1300
KRDIN70-16 70 2/0 11,5 16,5 17,5 17,5 72,5 30 28 3,7 M16 16DIN 25 V600, V1300
KRDIN95-8 95 4/0 13,5 19 13,5 13,5 78,5 28 35 5 M8 18DIN 25 V600, V1300
KRDIN95-10 95 4/0 13,5 19 13,5 13,5 78,5 28 35 5 M10 18DIN 25 V600, V1300
KRDIN95-12 95 4/0 13,5 19 14,5 14,5 79,5 28 35 5 M12 18DIN 25 V600, V1300
KRDIN95-16 95 4/0 13,5 19 17,5 17,5 82,5 32 35 4,4 M16 18DIN 25 V600, V1300
KRDIN120-10 120 250 15,5 21 13,5 13,5 83,5 32 35 5 M10 20DIN 20 V600, V1300
KRDIN120-12 120 250 15,5 21 14,5 14,5 84,5 32 35 5 M12 20DIN 20 V600, V1300
KRDIN120-16 120 250 15,5 21 17,5 17,5 87,5 32 35 5 M16 20DIN 20 V600, V1300
KRDIN120-20 120 250 15,5 21 20,5 20,5 90,5 38 35 4,1 M20 20DIN 20 V600, V1300
KRDIN150-10 150 300 17 23,5 13,5 13,5 91,5 34 35 6 M10 22DIN 20 V600, V1300
KRDIN150-12 150 300 17 23,5 14,5 14,5 92,5 34 35 6 M12 22DIN 20 V600, V1300
KRDIN150-16 150 300 17 23,5 17,5 17,5 95,5 34 35 6 M16 22DIN 20 V600, V1300
KRDIN150-20 150 300 17 23,5 20,5 21,5 98,5 40 35 5,2 M20 22DIN 20 V600, V1300
KRDIN185-10 185 350 19 25,5 13,5 13,5 95,5 37 40 6 M10 25DIN 10 V250, V1300
KRDIN185-12 185 350 19 25,5 13,5 13,5 95,5 37 40 6 M12 25DIN 10 V250, V1300
KRDIN185-16 185 350 19 25,5 17,5 17,5 99,5 37 40 6 M16 25DIN 10 V250, V1300
KRDIN185-20 185 350 19 25,5 20,5 21,5 102,5 40 40 5,7 M20 25DIN 10 V250, V1300
KRDIN240-10 240 500 21,5 29 14,5 14,5 117,5 42 40 7,1 M10 28DIN 10 V250, V1300
KRDIN240-12 240 500 21,5 29 14,5 14,5 106,5 42 40 7,1 M12 28DIN 10 V250, V1300
KRDIN240-16 240 500 21,5 29 17,5 17,5 109,5 42 40 7,1 M16 28DIN 10 V250, V1300
KRDIN240-20 240 500 21,5 29 20,5 21,5 112,5 45 40 6,5 M20 28DIN 10 V250, V1300
KRDIN300-12 300 600 24,5 32 17,5 17,5 117,5 48 50 7 M12 32DIN 5 V250, V1300
KRDIN300-16 300 600 24,5 32 17,5 17,5 117,5 48 50 7 M16 32DIN 5 V250, V1300
KRDIN300-20 300 600 24,5 32 20,5 21,5 120,5 48 50 7 M20 32DIN 5 V250, V1300
KRDIN400-12 400 750 27,5 38,5 23,5 17,5 138,5 55 70 10,4 M12 38DIN 5 V250, V1300
KRDIN400-16 400 750 27,5 38,5 23,5 17,5 138,5 55 70 10,4 M16 38DIN 5 V250, V1300
KRDIN400-20 400 750 27,5 38,5 23,5 21,5 138,5 55 70 10,4 M20 38DIN 5 V250, V1300
KRDIN500-12 500 1000 31 42 23,5 21,5 125 60 70 10,5 M12 42DIN 5 V250, V1300
KRDIN500-20 500 1000 31 42 23,5 21,5 148,5 60 70 10,5 M20 42DIN 2 V250
KRDIN625-20 625 1250 34,5 44 23,5 21,5 158,5 63 80 9,3 M20 44DIN 2 V250
KRDIN800-20 800 1600 40 52 23,5 21,5 188,5 75 100 11,6 M20 52DIN 1 V1470
KRDIN1000-20 1000 2000 44 58 23,5 21,5 188,5 85 100 13,2 M20 58DIN 1 V1470

Marking example: 70 10
70=mm²   10= palm hole for M10
s= strip length, t= palm thickness

 

Find out more about our products or becoming a supplier