Elpress KRF Angled Copper Cable Lugs - 90° Degrees (10-150mm²) (KRF16-6-90GR, KRF50-8-90GR)

Product overview

Elpress KRF Angled Copper Cable Lugs 90°

Elpress KRF Angled Copper Cable Lugs – 90° Degrees (10-150mm²) are produced from electrolytic copper and are tin plated. Popular Part Numbers: KRF16-6-90GR, KRF50-8-90GR

General Information

SYSTEM ELPRESS
System Elpress consists of Terminals and Tools that are designed and tested together to give a certified crimping result. This ensures that users will feel confident when using our systems, and that a secure connection is achieved through the proper handling of our products. By using Elpress Cu-Connection elements together with one of Elpress Crimp Systems one obtains a connection that has been tested according to the requirements of IEC 61238:1.

COPPER (CU) TERMINALS
Elpress Copper Connectors are made of pure Copper 99.95%. We manufacture Tube Terminals type KR/ KRF/ KRD/ KRT, Through Connectors type KS/ KSF/ KSD/ KST for stranded conductors, IEC 60228 Class 2, and flexible conductors IEC 60228 Class 5 such as C-Sleeves primarily pre-splicing of Cu-lines and many customised products. For flexible and stranded Cu conductors, terminals of type KR/ KRF and through connectors of type KS/ KSF are used. Terminals type KRD/ KRT and through connectors type KSD/ KST are normally used for stranded Cu conductors from and including 500mm2. Terminals of type KR/ KRF/ KRD/ KRT are used mainly in the splicing of copper conductors in cable assemblies. They can also be used for straight splicing of earth conductors. With a branching sleeve, type C, one splices and branches earth conductors, lightning conductor installations and the like.

UL-APPROVED TERMINALS
UL is an American standard which is also internationally accepted. Elpress standard Cu Terminals of types KR/ KS, KRF/ KSF, KRT/ KST, KRFS, KRFN are UL approved according to file no E205350.

DNV APPROVED
Elpress KR/ KS, KRF/ KSF and KRT/ KST Terminals meet DNV’s rules for classification of ships and Det Norske Veritas’ Offshore Standrards. The Terminals are approved for installations on ships and mobile offshore units.

NUMBER OF CRIMPS
Normally one crimp is required up to and including 150mm2 and 2 or 3 crimps for larger areas.Note, however, that another number of crimps may be needed in some cases, see table for tool dies. If possible, crimps should be placed next to each other with a couple of mm spacing between each one. Overlap is sometimes inevitable.

MARKING OF CU TERMINALS
Elpress marking system for Copper Terminals shows logotype, cable area and type number for hexagonal die. This system allows checks that the correct tools have been used when contact crimping because the die number automatically becomes embossed during the contact crimping.

For more information on Elpress KRF Angled Copper Cable Lugs 90° (KRF16-6-90GR, KRF50-8-90GR), consult PDF File or Technical Data Table  below. KRF16-6-90GR

*Technical Data subject to change without notice.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

  • Material: Cu 99.95%, tinned Cu/Sn
  • For Stranded (Class 2) or Flexible (Class 5) Cu Conductors
  • For Flexible Cu COnductors, Elpress recommends the DUAL System
  • UL-approved (KRF 35-150mm²). DNV-approved (16-150mm²).
Cat. No. Area mm² CuAWG/MCM A d D N N1 W s t Screw Angle Die no. Pcs/ Pack Rec. Tool
KR10-6-90GR 10 8 15 5 8 6,5 11,5 13 11 2,3 M6 90 8 100 PVL350, V600, DV1300, DV250
KR10-8-90GR 10 8 15 5 8 8,5 12 13,5 11 2,2 M8 90 8 100 PVL350, V600, DV1300, DV250
KR10-10-90GR 10 15 5 8 11,5 13,5 16 11 2 M10 90 8 100 PVL350, V600, DV1300, DV250
KRF16-6-90GR 16 6 16,5 6 9 6,5 11,5 13 12 2,9 M6 90 9 100 PVL350, V600, DV1300, DV250
KRF16-8-90GR 16 6 16,5 6 9 8,5 12 13 12 2,7 M8 90 9 100 PVL350, V600, DV1300, DV250
KRF25-6-90GR 25 4 18,5 8 11 6,5 11,5 16 13 2,7 M6 90 11 100 PVL350, V600, DV1300, DV250
KRF25-8-90GR 25 4 18,5 8 11 8,5 12 16 13 2,7 M8 90 11 100 PVL350, V600, DV1300, DV250
KRF25-10-90GR 25 4 18,5 8 11 11,5 13,5 17 13 2,9 M10 90 11 100 PVL350, V600, DV1300, DV250
KRF35-6-90GR 35 2 22,5 9 13 6,5 11,5 18 16 3,9 M6 90 13 100 PVL350, V600, DV1300, DV250
KRF35-8-90GR 35 2 22,5 9 13 8,5 12 18 16 3,9 M8 90 13 100 PVL350, V600, DV1300, DV250
KRF35-10-90GR 35 2 22,5 9 13 11,5 13,5 18 16 3,9 M10 90 13 100 PVL350, V600, DV1300, DV250
KRF50-8-90GR 50 1/0 30,5 11 14,5 8,5 17,5 21 19 3,4 M8 90 14,5 100 PVL350, V600, DV1300, DV250
KRF50-10-90GR 50 1/0 30,5 11 14,5 11,5 18,5 21 19 3,3 M10 90 14,5 100 PVL350, V600, DV1300, DV250
KRF50-12-90GR 50 1/0 30,5 11 14,5 12,5 19,5 21 19 3,3 M12 90 14,5 100 PVL350, V600, DV1300, DV250
KRF70-8-90GR 70 2/0 31,5 13 17 8,5 17,5 24 22 3,9 M8 90 17 50 PVL350, V600, DV1300, DV250
KRF70-10-90GR 70 2/0 31,5 13 17 11,5 18,5 24 22 3,9 M10 90 17 50 PVL350, V600, DV1300, DV250
KRF70-12-90GR 70 2/0 31,5 13 17 12,5 19,5 24 22 3,9 M12 90 17 50 PVL350, V600, DV1300, DV250
KRF95-10-90GR 95 4/0 32,5 15 20 11,5 18,5 28 25 4,9 M10 90 20 50 V600, DV1300, DV250
KRF95-12-90GR 95 4/0 32,5 15 20 12,5 19,5 28 25 4,9 M12 90 20 50 V600, DV1300, DV250
KRF95-16-90GR 95 4/0 32,5 15 20 15,5 20,5 29 25 4,8 M16 90 20 50 V600, DV1300, DV250
KRF120-8-90GR 120 250 42 17 22 8,5 17,5 32 27 4,9 M8 90 22 25 V600, DV1300, DV250
KRF120-8-90GR-SB 120 250 34,5 17 22 8,5 17,5 32 27 4,9 M8 90 22 25 V600, DV1300, DV250
KRF120-10-90GR 120 250 42 17 22 11,5 18,5 32 27 4,9 M10 90 22 25 V600, DV1300, DV250
KRF120-10-90GR-SB 120 250 34,5 17 22 11,5 18,5 32 27 4,9 M10 90 22 25 DV250
KRF120-12-90GR 120 250 42 17 22 12,5 19,5 32 27 4,9 M12 90 22 25 V600, DV1300, DV250
KRF120-12-90GR-SB 120 250 34,5 17 22 12,5 19,5 32 27 4,9 M12 90 22 25 DV250
KRF120-16-90GR 120 250 42 17 22 15,5 20,5 32 27 4,9 M16 90 22 25 V600, DV1300, DV250
KRF120-16-90GR-SB 120 250 34,5 17 22 15,5 20,5 32 27 4,9 M16 90 22 25 DV250
KRF150-10-90GR 150 300 47 19 25 11,5 18,5 36 32 5,9 M10 90 25 25 V600, DV1300, DV250
KRF150-10-90GR-SB 150 300 37,5 19 25 11,5 18,5 36 32 5,9 M10 90 25 25 DV250
KRF150-12-90GR 150 300 47 19 25 12,5 19,5 36 32 5,9 M12 90 25 25 V600, DV1300, DV250
KRF150-12-90GR-SB 150 300 37,5 19 25 12,5 19,5 36 32 5,9 M12 90 25 25 DV250
KRF150-16-90GR-LB 150 300 47 19 25 15,5 20,5 36 32 5,9 M16 90 25 25 V600, DV1300, DV250
KRF150-16-90GR-SB 150 300 37,5 19 25 15,5 20,5 36 32 5,9 M16 90 25 25 DV250
KRF185-10-90GR-SB 185 350 42,5 21 27 11,5 18,5 39 37 5,9 M10 90 27 25 V1300, V250
KRF185-12-90GR-SB 185 350 42,5 21 27 12,5 19,5 39 37 5,9 M12 90 27 25 V1300, V250
KRF185-16-90GR-SB 185 350 42,5 21 27 15,5 20,5 39 37 5,9 M16 90 27 25 V1300, V250


Marking example KRF: 70 10F (Elpress logotype included)

70=mm² 10= palm hole for M10 F=type KRF, for stranded and flexible conductors
t= palm thickness, s=strip length, SB= short barrell

 

Find out more about our products or becoming a supplier