Elpress Multicrimp System

Product overview

Elpress Multicrimp System

Elpress Multicrimp System – Punch, Matrix & Splicing Kits for indent crimping is a unique system for Aluminium crimping in the V1300 system. The system is designed for low voltage applications (1 kV) and is adapted for ground-covered cable. The number of punches and matrixes has decreased from the previous 21x (including prerounding) to 3 punches and 3 matrixes for indent crimping of both round and sector-shaped Al conductors in the range 50-240 mm².

Specially designed to facilitate work on sector-shaped cables in distribution networks. Prerounding is no longer needed for sector-shaped conductors. The number of crimps has decreased for 5 conductors, from 2x to 1x crimps, using MultiCrimp (NOTE! the sizes 185 and 240 mm² with P185240D/M require two crimps). For industry and more demanding installations, use Elpress conventional contact crimping systems with indent crimping.

System Properties

• complete splice kits
• several area sizes can be crimped with 3 different sleeves
• round- and sector-shaped conductors in the same sleeve (without the need for the prerounding of conductors)
• indent crimping on the sleeve for secure traceability
• reduced number of punches and matrixes, from 21x to 6x
• reduced number of connections, from 7x to 3x (50-240 mm²)

Elpress Multicrimp – Complete Splice Kits

For splicing screen guides, consult Datasheet attached.

Elpress Multicrimp – Punches & Matrices

General Information

SYSTEM ELPRESS
System Elpress consists of Terminals and Tools that are designed and tested together to give a certified crimping result. This ensures that users will feel confident when using our systems, and that a secure connection is achieved through the proper handling of our products.

HYDRAULIC CRIMP SYSTEMS
Elpress hydraulic crimp systems fit Elpress terminals and connectors from 10 to 1200 mm². The systems consist of pumps and crimp heads that can be freely combined or with complete hand-held tools, where these functions are intergrated. Wide range of accessories available for crimping, prerounding of sectorised conductors, cable cutting, etc. Together with the matching terminals the complete crimping system is formed. Both pumps and hand tools, with a few exceptions, have a quick feed function. This means that crimping can begin after a few pump strokes and after the dies have been brought in contact with the terminal. The systems also have a built-in ratchet lock, which ensures that an initial crimp is completed and thus produces the best possible results. Pumps that can be connected to a variety of different crimp heads offer versatility and provide maximum comfort and flexibility when working in tight spaces and demanding areas.

For more information on Elpress Multicrimp System – Punch, Matrix & Splicing Kits, consult PDF File or Technical Data Table below.

*Technical Data subject to change without notice.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929