Elpress TH10120T Crimping Tool (10-120mm²)
Elpress TH10120T Crimping Tool (10-120mm²) is a mechanical handtool for crimping of Cu-terminals type KR/ KRT/ KS/ KST, 10-120 mm².
EAN code: 7393487026902
Elpress TH10120T Features
- Certified tool for norm compliant connection
- 30% lower handforce than earlier T2258 version makes the crimping easier
- Ergonomic handles make the installation easier
- Scissor movement for optimal access in narrow spaces
- Ratchet release which is not released until the crimping is completed
- Hexagonal crimping with clearly marked crimping dies
- Possibility to adjustment at calibration after long time use
- Elpress TH10120T Crimping Tool with rotating crimp wheel
- No full closure mechanism
- Crimp force up to approximately 35kN
- Net Weight: 3.761 kg
- Dimensions (L x W x H): 650 x 44 x 80 mm
System Elpress consists of Terminals and Tools that are designed and tested together to give a certified crimping result. This ensures that users will feel confident when using our systems, and that a secure connection is achieved through the proper handling of our products.
HYDRAULIC CRIMP SYSTEMS
Elpress hydraulic crimp systems fit Elpress terminals and connectors from 10 to 1200 mm². The systems consist of pumps and crimp heads that can be freely combined or with complete hand-held tools, where these functions are intergrated. Wide range of accessories available for crimping, prerounding of sectorised conductors, cable cutting, etc. Together with the matching terminals the complete crimping system is formed. Both pumps and hand tools, with a few exceptions, have a quick feed function. This means that crimping can begin after a few pump strokes and after the dies have been brought in contact with the terminal. The systems also have a built-in ratchet lock, which ensures that an initial crimp is completed and thus produces the best possible results. Pumps that can be connected to a variety of different crimp heads offer versatility and provide maximum comfort and flexibility when working in tight spaces and demanding areas.
The V1300 System is used for crimping Cu Terminals 10-400mm2. An open-head C version is also available for better access in confined spaces.
The V250 System is used for crimping Cu Terminals 10-800mm2.
The V1300 System is used for the indent crimping of Al Terminals and pre-rounding of Al Conductors 16-240mm2. Round crimping is carried out on sector-shaped Al Conductors.
The V250 System is used for indent crimping Al Terminals and pre-rounding Al Conductors 16-630mm2. Round crimping is carried out on sector-shaped Al Conductors.
For more information on Elpress Crimping Tool TH10120T (10-120mm²), consult PDF File or Technical Data Table below.
*Technical Data subject to change without notice.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
|Cat. No.||Area mm²||CU KRF/KSF mm²||Gross weight kg||L x W x H mm||Crimping geometry|
|Elpress TH10120T||10-120||10-120||3,761||650 x 44 x 80||Hexagonal|
Find out more about our products or becoming a supplier