+44 (0)1744 762 929
Elpress Un-Insulated Insulation Boots

Product overview

Elpress Un-Insulated Insulation Boots are used together with straight and angled receptacle connections.


General Information

Elpress Un-Insulated Ring, Tube Terminals, Forks, Pins and Connectors are produced from high grade 99.95 copper. The Receptacles, Tabs, Bullets and Sockets are produced from brass. All types are electrolytically tin plated for good corrosion protection. Rings, Forks and Pins have brazed necks to allow crimping in all radial directions. Features include:

Elpress Un-Insulated Terminals are, when possible, marked with logotype, max cross section area and possible screw size to facilitate identification, inspection and crimp system work.

UL is an American standard which is also internationally accepted. Elpress standard Cu Terminals of types KR/ KS, KRF/ KSF. KRT/ KST are UL approved according to no. E205350. Cu Terminals of types KR/ KS, KRF/ KSF are for stranded and flexible copper wires, classes 2 and 5 according to IEC 60228, and have a working area of 1-500mm².

For more information on Elpress Un-Insulated Insulation Boots, see PDF File below.


FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

  • Data: used together with straight and angled receptacle connections.
Figure Cat. No. mm L  mm W Material Colour mm Tab size mm Max Cable  Ø Pcs/Pack Temp °C Min Temp °C Max
1 ISO1003FL1 19 5,6 PE transparent 2,8 2,5 100 -50 85
2 ISO1005FL1 21 7,6 PVC transparent 4,8 3,2 100 -25 75
3 ISO1507HBW6 23 11,0 PVC transparent 6,3 3,6 100 -25 75
4 ISO1507FLS 24 9,0 PE transparent 6,3 2,5 100 -25 75
5 ISO2507FLS1 22,5 9,5 PE transparent 6,3 3 100 -50 85
6 ISO1507FLB* 17,3 15,0 PVC transparent 6,3 2,5 100 -25 75

*Used with 90° receptacle

    Make an enquiry