Elpress Un-Insulated Jointing Sleeves (0.75-10mm²)

Product overview

Elpress Un-Insulated Jointing Sleeves

Elpress Un-Insulated Jointing Sleeves (0.75-10mm²) are made from high grade 99.95% copper, are tin plated and UL-approved. Part Numbers: Elpress KS0.75, Elpress KS1.5, Elpress KS2.5, Elpress KS4, Elpress KS6, Elpress KS10, Elpress KS10.

General Information

UN-INSULATED TERMINALS
Elpress Through Connectors, Ring, Pipe, Fork and Pin terminals are produced from high quality Copper 99.95%. The Receptacles and Sockets are made of brass. All terminals are then electro-tin plated for maximum corrosion protection. Terminals made of copper bands have a brazed neck which is soldered, which means that it can be crimped in any direction. Features include:

MARKING OF UNINSULATED TERMINALS
Elpress Uninsulated Terminals are, when possible, marked with logotype, max cross section area and any screw diameter to facilitate identification, inspection and crimp system work.

IEC RECOMMENDATIONS
The International Electrical Commission (IEC) publishes internationally viable standards which, although not directly binding, often have great impact and are used as the basis for international deliveries. A technical report, IEC 61238-2, sets out the following recommendations regarding screw sizes for connecting terminals with Cu and Al plate provided that mounting takes place with a washer and with the correct tightening torque.

Conductor Area: 10 mm2 -> Screw: M6
Conductor Area: 16-50 mm2 -> Screw: M8
Conductor Area: 70-95 mm2 -> Screw: M10
Conductor Area: 120-300 mm2 -> Screw: M12
Conductor Area: 400-500 mm2 -> Screw: M16

UL-APPROVED TERMINALS
UL is an American standard that is also internationally accepted. Elpress standard Cu-Terminals type KR/ KS, KRF/ KSF are UL approved according to no. E205350.

For more information on Elpress Un-Insulated Jointing Sleeves (KS0.75, KS1.5, KS2.5, KS4, KS6, KS10, KS10), see Technical Data below.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

  • Material: Cu 99.95%, tin plated Cu/Sn.
  • UL-approved (not KS0,75).
AWG mm2 Cat. No. mm d D L s Pcs/ Pack Rec. Tool
(22)-18 0.75 KS0,75 1.3 2.8 14 7 100 DKB0325, DKB0760
(18)-16 1.5 KS1,5 1.8 3.3 14 7 100 DKB0325, DKB0760
(16)-14 2.5 KS2,5 2.3 4.2 16 8 100 DKB0325, DKB0760
12 4 KS4 3 5 19 9 100 GWB4099, ES2258
10 6 KS6 4 6 19 9 100 GWB4099, ES2258
8 10 KS10 5 8 30 15 100 GWB4099, ES2258, PVL350, V600, DV1300

s= strip length
KS10 Die: 8

 

Find out more about our products or becoming a supplier