Elpress V1300 Crimping Head (Cu & Al 10-400mm², C-sleeves 6-120mm²)

Product overview

Elpress V1300 Crimping Head is a tested and certified crimp head for contact crimping Cu terminals (type KR/KRT/KS/KST 10mm², KRF/KRD/KRT/KSF/KSD/KST 16-400mm²), Al terminals 16-400mm² (-240 solid), DIN46235 10-300mm², C sleeves up to 240mm² total area (C95-120). Used together with Foot Pump P4000 and Battery/ Mains Powered Pump PS710.
EAN code: 7393487000520

ELPRESS V1300 Crimping Head FEATURES

  • Elpress V1300 Crimping Head is equipped with oil spray safety protection cap
  • Versatile and easy to use crimp head
  • Working pressure 63 MPa (630 bar)
  • Crimp force 130 Kn (13 tonnes)
  • Net Weight: 3.46 kg
  • Dimensions: 263 x 88 x 75 mm

General Information

SYSTEM ELPRESS
System Elpress consists of Terminals and Tools that are designed and tested together to give a certified crimping result. This ensures that users will feel confident when using our systems, and that a secure connection is achieved through the proper handling of our products. 7393487042797

HYDRAULIC CRIMP SYSTEMS
Elpress hydraulic crimp systems fit Elpress terminals and connectors from 10 to 1200 mm². The systems consist of pumps and crimp heads that can be freely combined or with complete hand-held tools, where these functions are intergrated. Wide range of accessories available for crimping, prerounding of sectorised conductors, cable cutting, etc. Together with the matching terminals the complete crimping system is formed. Both pumps and hand tools, with a few exceptions, have a quick feed function. This means that crimping can begin after a few pump strokes and after the dies have been brought in contact with the terminal. The systems also have a built-in ratchet lock, which ensures that an initial crimp is completed and thus produces the best possible results. Pumps that can be connected to a variety of different crimp heads offer versatility and provide maximum comfort and flexibility when working in tight spaces and demanding areas.

CU TERMINALS
The V1300 System is used for crimping Cu Terminals 10-400mm2. An open-head C version is also available for better access in confined spaces.
The V250 System is used for crimping Cu Terminals 10-800mm2.

AL TERMINALS
The V1300 System is used for the indent crimping of Al Terminals and pre-rounding of Al Conductors 16-240mm2. Round crimping is carried out on sector-shaped Al Conductors.
The V250 System is used for indent crimping Al Terminals and pre-rounding Al Conductors 16-630mm2. Round crimping is carried out on sector-shaped Al Conductors.

For more information on Elpress V1300 Crimping Head, consult PDF File or Technical Data Table below.

*Technical Data subject to change without notice.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Part No. mm²
(Cu)
mm²
(Stranded Al)
mm²
(Solid Al)
C-Sleeves
mm2 
Gross Weight kg L x W x H (mm) Crimping Geometry
V1300 10-400 16-400 16-240  6-240 3,34 263 x 88 x 75 Punch, Hexagonal, Oval

Find out more about our products or becoming a supplier