+44 (0)1744 762 929
Mega Snake 801 Series - Cable Tray

Product overview

Snake Tray Mega Snake 801 Series – Cable Tray is a high capacity, preconfigured cable tray system. Strong as steel but flexible with preconfigured sections to radically reduce installations costs. Mega Snake Cable Tray allows crews to complete installations faster and reduce installed costs by eliminating labor-intensive steps and parts required by all other cable tray systems. Straight Sections, 45° Turns, 90° Turns, T-Section Cable Trays and Crossing Grids. Accessories also available.

Snake Tray is the world’s only hand-bendable cable tray that requires no labor-intensive cutting and clipping in order to construct fast cable tray bends. Installs overhead, on walls and under access floors.

Its hand bendable design combined with Snake Tray’s built-in mounting hardware gives Snake Tray the installation cost saving advantage over any other cable tray system in today’s market. Installers are able to create turns in 10 seconds versus 20 minutes with wire mesh cable tray!

Snake Tray 801 Features & Benefits

  • Pre-manufactured straights, turns, Ts and crosses (No fabrication required)
  • Mega Snake Cable Tray 801 is strong as steel but flexible
  • Built-in suspension systems eliminates costly brackets
  • Quick installing splice kit creates both mechanical and electrical bond
  • Patented accessory rail can be accessorized with power modules, patch panels, wireless distributions and other devices
  • Trays nest together for compact and cost effective shipping and material handling

Snake Tray 801 Series – Cable Tray

For Technical Data, download Datasheet or advise table at the bottom of the page.

Mega Snake Straight Sections

Drawing Part Number Loading
Dimensions 
 Cable
Capacity
Datasheet
CM 801-2-6-10 * 2″ x 6″ x 10′ 125 Download
CM 801-4-6-10 * 4″ x 6″ x 10′ 250 Download
CM 801-2-12-10 * 2″ x 12″ x 10′ 250 Download
CM 801-4-12-10 * 4″ x 12″ x 10′ 490 Download
CM 801-6-12-10 * 6″ x 12″ x 10′ 720 Download
CM 801-2-18-10 2″ x 18″ x 10′ 375 Download
CM 801-4-18-10 4″ x 18″ x 10′ 735 Download
CM 801-6-18-10 6″ x 18″ x 10′ 1,100 Download
CM 801-2-24-10 2″ x 24″ x 10′ 490 Download
CM 801-4-24-10 4″ x 24″ x 10′ 980 Download
CM 801-6-24-10 6″ x 24″ x 10′ 1,470 Download
For best results, it is recommended that Mega Snake be supported every 5 feet.
*Products manufactured with centre support rail for center hanging options.
Cable Capacity based on 50% fill as per nec articale 392.9B 0.25 OD
Finishes: Mechanically applied Galvanised Finish (G), Stainless Steel (SS), Powder Coated (PC).


Cable Tray 45° Turns

Part Number Part Size Datasheet
CM 801-2-6-45 2″ D x 6″ W 45° Turn Download
CM 801-4-6-45 4″ D x 6″ W 45° Turn Download
CM 801-2-12-45 * 2″ D x 12″ W 45° Turn Download
CM 801-4-12-45* 4″ D x 12″ W 45° Turn Download
CM 801-6-12-45 * 6″ D x 12″ W 45° Turn Download
CM 801-2-18-45 2″ D x 18″ W 45° Turn Download
CM 801-4-18-45 4″ D x 18″ W 45° Turn Download
CM 801-6-18-45 6″ D x 18″ W 45° Turn Download
CM 801-2-24-45 2″ D x 24″ W 45° Turn Download
CM 801-4-24-45 4″ D x 24″ W 45° Turn Download
CM 801-6-24-45 6″ D x 24″ W 45° Turn Download
*Products manufactured with centre support rail.
Cable Capacity based on 50% fill as per nec articale 392.9B 0.25 OD
Finishes: Mechanically applied Galvanised Finish (G), Stainless Steel (SS), Powder Coated (PC).


Cable Tray 90° Turns

Part Number Part Size
Datasheet
CM 801-2-6-90 2″ D x 6″ W 90° Turn Download
CM 801-4-6-90 4″ D x 6″ W 90° Turn Download
CM 801-2-12-90* 2″ D x 12″ W 90° Turn Download
CM 801-4-12-90* 4″ D x 12″ W 90° Turn Download
CM 801-6-12-90* 6″ D x 12″ W 90° Turn Download
CM 801-2-18-90 2″ D x 18″ W 90° Turn Download
CM 801-4-18-90 4″ D x 18″ W 90° Turn Download
CM 801-6-18-90 6″ D x 18″ W 90° Turn Download
CM 801-2-24-90 2″ D x 24″ W 90° Turn Download
CM 801-4-24-90 4″ D x 24″ W 90° Turn Download
CM 801-6-24-90 6″ D x 24″ W 90° Turn Download
*Products manufactured with centre support rail.
Cable Capacity based on 50% fill as per nec articale 392.9B 0.25 OD
Finishes: Mechanically applied Galvanised Finish (G), Stainless Steel (SS), Powder Coated (PC).


T-Section Cable Trays

Drawing Part Number Part Size Datasheet
Snaketray T-Section Cable Trays CM 801-2-6-T 2″ D x 6″ W T-Section Download
CM 801-4-6-T 4″ D x 6″ W T-Section Download
CM 801-2-12-T * 2″ D x 12″ W T-Section Download
CM 801-4-12-T * 4″ D x 12″ W T-Section Download
CM 801-6-12-T * 6″ D x 12″ W T-Section Download
CM 801-2-18-T 2″ D x 18″ W T-Section Download
CM 801-4-18-T 4″ D x 18″ W T-Section Download
CM 801-6-18-T 6″ D x 18″ W T-Section Download
CM 801-2-24-T 2″ D x 24″ W T-Section Download
CM 801-4-24-T 4″ D x 24″ W T-Section Download
CM 801-6-24-T 6″ D x 24″ W T-Section Download
*Products manufactured with centre support rail.
Cable Capacity based on 50% fill as per nec articale 392.9B 0.25 OD
T-Section Cable Tray Finishes: Mechanically applied Galvanised Finish (G), Stainless Steel (SS), Powder Coated (PC).


Cable Tray Crossing Grids

Drawing Part Number Part Size Datasheet
Snake tray Crossing Grid CM 801-2-6-CG 2″ D x 6″ W 4-Way Crossing Grid Download
CM 801-4-6-CG 4″ D x 6″ W 4-Way Crossing Grid Download
CM 801-2-12-CG * 2″ D x 12″ W 4-Way Crossing Grid Download
CM 801-4-12-CG * 4″ D x 12″ W 4-Way Crossing Grid Download
CM 801-6-12-CG * 6″ D x 12″ W 4-Way Crossing Grid Download
CM 801-2-18-CG 2″ D x 18″ W 4-Way Crossing Grid Download
CM 801-4-18-CG 4″ D x 18″ W 4-Way Crossing Grid Download
CM 801-6-18-CG 6″ D x 18″ W 4-Way Crossing Grid Download
CM 801-2-24-CG 2″ D x 24″ W 4-Way Crossing Grid Download
CM 801-4-24-CG 4″ D x 24″ W 4-Way Crossing Grid Download
CM 801-6-24-CG 6″ D x 24″ W 4-Way Crossing Grid Download
*Products manufactured with centre support rail.
Cable Capacity based on 50% fill as per nec articale 392.9B 0.25 OD
Finishes: Mechanically applied Galvanised Finish (G), Stainless Steel (SS), Powder Coated (PC).

For Technical Data, download Datasheet or advise table at the bottom of the page.


T-Section Cable Trays, Cable Tray Crossing Grids

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.

Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Make an enquiry