Nexans Euromold 400AR-4BC Equipment Bushing
Nexans Euromold 400AR-4BC/ K400AR-4BC Equipment Bushings are MV-HV Bushings for use in equipment insulated with air, typically for switchgear, capacitors, motors that are specified to terminate and connect medium/high voltage cables in the following voltage classes:
- 6/10 (12kV)
- 6.35/11 (12kV)
- 8.7/15 (17.5kV)
- 12/20 (24kV)
- 12.7/22 (24kV)
703937 – K400AR-4BC/J + KBC-RING CLAMP 3 *SS
703939 – K400AR-4BC/J-ATEX-IECEx + KBC-RING CLAMP 3 *SS
- Each bushing is tested for AC withstand and partial discharge prior to leaving the factory.
- The bolted type equipment bushings are moulded epoxy insulated parts and meet the requirements of CENELEC EN 50180.
- A non-tracking insulating rubber boot is installed over the bushing shank.
- On the new Interface C in-air bushing you can install all separable connectors of the Interface C product family. It also offers the possibility to install a Surge Arrester.
- The new Interface C in-air bushing is also available with ATEX/IECEx/UKEx certification.
Specification & Design
To order the equipment bushing, specify the type. The bushings are supplied with an earth jumper (/J) or an earth plate (/GS). This earth connection must be specified when ordering (e.g. K400AR-4BC/J):
|400AR-4BC||12 kV||1250 Amps||315 mm|
|K400AR-4BC||24 kV||1250 Amps||315 mm|
Note: For dimensions of the above bushing types, refer to the Technical Data Table below.
Nexans Euromold 400AR-4BC Fixings for Bushings
For Ordering Instructions and Part Number Selection Table of Nexans Euromold 400AR-4BC/ K400AR-4BC Equipment Bushings, please refer to the Technical Data Table Below. For additional General and Technical Information, download PDF File.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
To order the equipment bushing, specify the type. The bushings are supplied with an earth jumper (/J) or an earth plate (/GS).
This earth connection must be specified when ordering (e.g. K400AR-4BC/J).
For use in potentially explosive atmospheres (for 12kV max), order -/ATEX
|EQUIPMENT BUSHING TYPE||VOLTAGE
|A||B||C||D||E||Dia. F||Dia. G||Dia. H|
|400AR-4BC||12 kV||1250 Amps||329 mm||138 mm||36 mm||M16||40 mm||100 mm||150 mm||32 mm|
|K400AR-4BC||24 kV||1250 Amps||329 mm||138 mm||36 mm||M16||40 mm||100 mm||150 mm||32 mm|
Find out more about our products or becoming a supplier