Nexans Euromold 400TE Separable Tee Connector (400TE/G, K400TE/G, M400TE/G)
Nexans Euromold 400TE Separable Tee Connector (400TE/G, K400TE/G, M400TE/G)

Product overview

Nexans Euromold 400TE Separable Tee Connector

Nexans Euromold 400TE Separable Tee Connector with 400A Current Rating is a tee-connector designed for Interface B and covers voltages from 11/12kV to 33/36kV with a maximum conductor size of 240sqmm. The separable connector connects polymeric insulated cable to equipment (transformers, switchgear, motors, etc.) and meets the requirements of CENELEC HD 629,1.
Type 400TE Part Numbers: 400TE/G, K400TE/G, M400TE/G.

Euromold 400TE is a screened separable tee connector specified to terminate and connect medium/high voltage cables onto Interface B bushings in the following voltage classes:

  • 6/10 (12kV)
  • 6.35/11 (12kV)
  • 8.7/15 (17.5kV)
  • 12/20 (24kV)
  • 12.7/22 (24kV)
  • 18/30 (36kV)
  • 19/33 (36kV)

Technical Characteristics

  • The thick conductive EPDM jacket provides a total safe to touch screen which ensures safety for personnel.
  • Each separable connector is tested for AC withstand and partial discharge prior to leaving the factory.

Specification & Design

Euromold
Type 400TE		 Voltage
Um		 Current
Ir		 Conductor Size
Min		 Conductor Size
Max
400TE/G 12 kV 400 Amps 70 240
K400TE/G 24 kV 400 Amps 25 240
M400TE/G 36 kV 400 Amps 35 185

 

Euromold-400TE-Tee-Connector-11kV-33kV-DesignSeparable connector comprising:

  1. Conductive EPDM insert
  2. Conductive EPDM jacket
  3. Insulating EPDM layer moulded between the insert and the jacket
  4. Type B – 400 A interface as described by CENELEC EN 50180 and 50181
  5. Conductor connector
  6. Basic insulating plug (with VD point)
  7. Cable reducer
  8. Conductive rubber cap
  9. Clamping pin contact
  10. Bail restraint
  11. Earthing lead

The thick conductive EPDM jacket provides a safe to touch screen which ensures safety for personnel, cables and electrical equipment in medium/high voltage installations.

400TE Tee Connector Kit Contents

The complete (K)(M)400TE/G tee connector kit comprises the following components. The kit also comprises lubricant, wipers, installation instructions and crimp chart.

Kit-Contents-for-Euromold-400TE-Connectors

For Ordering Instructions and Part Number Selection Table of Nexans Euromold 400TE Separable Tee Connector (400TE/G, K400TE/G, M400TE/G), please refer to the Technical Data Table Below. For additional General and Technical Information, download PDF File.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

ORDERING INSTRUCTIONS FOR (K)(M)400TE/G

Select the part number which gives the best centring to the cable core insulation diameter and substitute X using table X, according to the conductor size and type.

Add a 'K' for use up to 24 kV and add an 'M' for use up to 36 kV.

Example: The copper wire screened cable is 24 kV, 240 mm2 stranded aluminium with a diameter over core insulation of 32.1 mm. Order 3 x K400TE/G-27-240(K) M-12-2 tee connector kit.
PART NUMBER DIAMETER OVER CORE INSULATION MIN DIAMETER OVER CORE INSULATION MAX
400TE/G-11-X 12 mm 17.5 mm
400TE/G-15-X 16 mm 22 mm
400TE/G-19-X 20 mm 26.5 mm
400TE/G-22-X 23.5 mm 31 mm
400TE/G-25-X 26.5 mm 32.5 mm
400TE/G-27-X 28.5 mm 37.5 mm

TABLE X - CONNECTORS SUITABLE FOR COPPER & ALUMINIUM CABLES
CONDUCTOR SIZE ALU CABLE
DIN HEX CRIMP		 ALU CABLE
DEEP INDENT CRIMP		 CU CABLE
DIN HEX CRIMP
25 mm2 - - 25(K)M-11-2
35 mm2 35(K)M-12-2 35(K)M-12-1 35(K)M-11-2
50 mm2 50(K)M-12-2 50(K)M-12-1 50(K)M-11-2
70 mm2 70(K)M-12-2 70(K)M-12-1 70(K)M-11-2
95 mm2 95(K)M-12-2 95(K)M-12-1 95(K)M-11-2
120 mm2 120(K)M-12-2 120(K)M-12-1 120(K)M-11-2
150 mm2 150(K)M-12-2 150(K)M-12-1 150(K)M-11-2
185 mm2 185(K)M-12-2 185(K)M-12-1 185(K)M-11-2
240 mm2 240(K)M-12-2 240(K)M-12-1 240(K)M-11-2

 

Find out more about our products or becoming a supplier