+44 (0)1744 762 929
nVent CADDY Speed Link SLS System

Product overview

nVent CADDY Speed Link SLS System is a versatile wire rope system that attaches directly to metal framing channels without the use of tools; ideal for hanging strut-based applications, ceiling fan units or cable tray.

The nVent CADDY Speed Link SLS System is an innovative cable solution for supporting metal framing channels, ceiling fan units, and other hangers. The locking device is similar to the keyless design of nVent CADDY Speed Link SLK but with a single barrel.

The outside of the housing is threaded and is held in a channel or hanger by a push-to-install retaining nut. This engineered elongated retaining nut reduces unwanted sway of the trapeze during installation and provides higher stability.

The system allows for quick and easy prefabrication of complex assemblies at ground level that can be easily lifted and held in place by wire rope.

nVent CADDY Speed Link SLS with Decking Hook

nVent CADDY Speed Link
SLS with Decking Hook

nVent CADDY Speed Link SLS with Hook

nVent CADDY Speed Link
SLS with Hook

nVent CADDY Speed Link SLS with Threaded Stud End

nVent CADDY Speed Link
SLS with Threaded Stud End

nVent CADDY Speed Link SLS with Wedge Anchor

nVent CADDY Speed
Link SLS with Wedge Anchor

nVent CADDY Speed Link SLS Trapeze Kit

nVent CADDY Speed
Link SLS Trapeze Kit

Features

  • Single barrel locking device allows for quick prefabrication of strut or brackets
  • Push-on nut quickly and securely installs to strut or bracket to keep the locking device in position and eases installation
  • Finger tightening of nut secures the locking device into position without tools
  • Installs in strut profiles without the need to insert fingers or too​ls into the strut
  • Push-on nut guides the cable into the locking device and brings stability to the support
  • Installs with open side of the strut channel facing up or down for more flexibility​

 

For detailed Product Information and Technical Data see table below.

 

*Technical Data subject to change without notice.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

 

Technical Data

nVent CADDY Speed Link SLS with Decking Hook

nVent CADDY Speed Link SLS with Decking Hook Features:

  • Complete system includes wire, locking device and pre-assembled decking hook end fitting
  • Quickly and easily attaches to hollow metal decking
  • Spring-loaded ends snap into decking hole and lock into place
  • Innovative design helps protect the wire from sharp edges of decking hole, minimizing risk of damage to wire
  • Finger tightening of nut secures the locking device into position without tools
  • Installs in strut profiles without the need to insert fingers or too​ls into the strut
  • Material: Steel; Zinc Alloy; Polypropylene
  •  Finish: Electrogalvanized
  • Static Load Safety Factor: 5:1
  • Complies With: SMACNA HVAC-DCS
  • Wire Rope Diameter: 2 mm
Part Number Article Number Wire Rope
Length
Roof Decking
Sheet Thickness
A: Hole Size 1
(HS1):
Static Load
(F):
SLS2L3DH 196753 3 m 1.5 mm Max 9.2 mm 8 mm 270 N
SLS2L5DH 196754 5 m 1.5 mm Max 9.2 mm 8 mm 270 N
SLS2L7DH 196755 7 m 1.5 mm Max 9.2 mm 8 mm 270 N
Thread Size
(TS):
Height 1
(H1):
Height 2
(H2):
Width
(W):
Thickness
(T):
Hole Size 2
(HS2):
Slot Size
(SS):
M8 53 mm 46.5 mm 16 mm 4 mm Max 8 – 10 mm 8 x 6.5 mm - 8 x 10 mm

Notes:

  • The 2 mm locking device is compatible with C-Channel Types E0 and E0L.
  • Total load per wire on a multi-tier trapeze must not exceed static load.
  • Load rating is only applicable if the load-bearing capacity of the supporting element (steel decking) is adequate.
  • Check with deck manufacturer for recommended load capacity.

nVent CADDY Speed Link SLS with Hook

nVent CADDY Speed Link SLS with Hook Features:

  • Complete system includes wire, locking device and pre-assembled hook end fitting
  • Hooks to a wide range of nVent CADDY fasteners
  • Fastens to the building structure or hanging services by looping around and hooking to wire rope
  • Easy to remove for applications requiring maintenance
  • Spring latch helps provide secure connection
  • Insert cable through hole and use bottom side of hook as an end stop
  • Finger tightening of nut secures the locking device into position without tools
  • Installs in strut profiles without the need to insert fingers or too​ls into the strut
  • Material: Steel; Zinc Alloy; Polypropylene
  • Finish: Electrogalvanized
  • Static Load Safety Factor: 5:1
  • Complies With: SMACNA HVAC-DCS
Part Number SLS2L1 SLS2L2 SLS2L3 SLS2L5 SLS2L7 SLS2L10   SLS3L1 SLS3L2 SLS3L3 SLS3L5 SLS3L7 SLS3L10
Article Number 196741 196742 196743 196744 196745 196746   196747 196748 196749 196750 196751 196752
Wire Rope Length 1 m 2 m 3 m 5 m 7 m 10 m   1 m 2 m 3 m 5 m 7 m 10 m
Wire Rope Diameter
2 mm 3 mm
A 57.0 mm 57.6 mm
B 20.0 mm 23.2 mm
C 5.5 mm 6.1 mm
Height 1 (H1) 53 mm 53 mm
Height 2 (H2) 43.5 mm 46.5 mm
Thread Size (TS) M8 M12
Width (W) 16 mm 20 mm
Hole Size (HS) 8 – 10 mm 12 – 14 mm
Slot Size (SS) 8 x 6.5 mm - 8 x 10 mm 12 x 10 mm - 12 x 14 mm
Thickness (T) 4 mm Max 6 mm Max
Static Load (F) 270 N 670 N
Standard Packaging Quantity 10 pc 10 x 10 pc 10 x 5 pc 5 x 5 pc

Notes:

  • The 2 mm locking device is compatible with C-Channel Types E0 and E0L.
  •  The 3 mm locking device is compatible with C-Channel Types E1, E2, E2L, E3, E4, E5, Strut Channel Type C, Slotted, Strut Channel Type A, Slotted, Strut Channel Type AS, Perforated, Strut Channel Type CC, Slotted, Strut Channel Type AA, Slotted.
  • Total load per wire on a multi-tier trapeze must not exceed static load.

nVent CADDY Speed Link SLS with Threaded Stud End

nVent CADDY Speed Link SLS with Threaded Stud End Features:

  • Complete system includes wire, locking device and pre-assembled threaded stud end fitting
  • Attaches to structures with threaded anchors or devices with threaded hole
  • Finger tightening of nut secures the locking device into position without tools
  • Installs in strut profiles without the need to insert fingers or too​ls into the strut
  • Material: Steel; Zinc Alloy; Polypropylene
  • Finish: Electrogalvanized
  • Static Load Safety Factor: 5:1
  • Complies With: SMACNA HVAC-DCS
  • Wire Rope Diameter: 2 mm

Part Number Article Number Wire Rope
Length
Rod Size
(RS):
Screw Length
(L):
Static Load
(F):
SLS2L2SEM8 196756 2 m M8 45 mm 270 N
SLS2L3SEM8 196757 3 m M8 45 mm 270 N
SLS2L5SEM8 196758 5 m M8 45 mm 270 N
Thread Size
(TS):
Height 1
(H1):
Height 2
(H2):
Width
(W):
Thickness
(T):
Hole Size
(HS):
Slot Size
(SS):
M8 53 mm 43.5 mm 16 mm 4 mm Max 8 – 10 mm 8 x 6.5 mm - 8 x 10 mm

Notes:

  • The 2 mm locking device is compatible with C-Channel Types E0 and E0L.
  • Total load per wire on a multi-tier trapeze must not exceed static load.

nVent CADDY Speed Link SLS with Wedge Anchor

nVent CADDY Speed Link SLS with Wedge Anchor Features:

  • Complete system includes wire, locking device and wedge anchor from Powers Fasteners, Inc.
  • Quickly and easily attaches into cracked and non-cracked concrete
  • Installs in strut profiles without the need to insert fingers or too​ls into the strut
  • Finger tightening of nut secures the locking device into position without tools
  • No special tools required
  • ​ETA-13/0106 approval available for wedge anchor from Powers Fasteners, Inc​
  • Material: Steel; Zinc Alloy; Polypropylene
  • Finish: Electrogalvanized
  • Static Load Safety Factor: 5:1
  • Complies With: SMACNA HVAC-DCS
  • Wire Rope Diameter: 2 mm
Part Number Article Number Wire Rope
Length
Length
(L):
Drill Bit Diameter: Drill Hole Depth: Embedment Depth: Static Load
(F):
SLS2L3WA6 196759 5 m 63.5 mm 6 mm 60 mm 55 mm Min 270 N
SLS2L5WA6 196760 5 m 63.5 mm 6 mm 60 mm 55 mm Min 270 N
SLS2L7WA6 196761 7 m 63.5 mm 6 mm 60 mm 55 mm Min 270 N
Thread Size
(TS):
Height 1
(H1):
Height 2
(H2):
Width
(W):
Thickness
(T):
Hole Size
(HS):
Slot Size
(SS):
M8 53 mm 43.5 mm 16 mm 4 mm Max 8 – 10 mm 8 x 6.5 mm - 8 x 10 mm

Notes:

  • The 2 mm locking device is compatible with C-Channel Types E0 and E0L.
  • Total load per wire on a multi-tier trapeze must not exceed static load.

nVent CADDY Speed Link SLS Trapeze Kit

nVent CADDY Speed Link SLS Trapeze Kit Features:

  • Out of the box trapeze solution includes Telescoping Strut Replacement, wire rope with pre-assembled hook end-fitting, and two nVent CADDY Speed Link SLS locking devices
  • Telescopes to the desired length and is locked in place by snapping closed a spring retainer clip
  • Standard strut profile runs the entire length of the Telescoping Strut Replacement, allowing most standard fittings to be placed anywhere between the wire rope supports
  • Supports up to seven 2" (50 DN) conduits, six 2" (50 DN) water filled pipes at 10' (3 m) spacing, or up to 18” (450 mm) cable tray
  • Conduit and pipe can be placed directly on the strut profile, saving vertical space in buildings with limited room for installation
  • Fastens to the building structure or hanging services by looping around and hooking to wire rope
  • Hooks to a wide range of nVent CADDY fasteners
  • Finger tightening of nut secures the locking device into position without tools
  • Installs in telescoping strut replacement without the need to insert fingers or too​ls into the channel
  • Easy to remove for applications requiring maintenance
  • Material: Steel; Zinc Alloy; Polyamide
  • Finish: Electrogalvanized; Pregalvanized
  • Wire Rope Diameter: 3 mm
Part Number TSR1220SLS3
Article Number 366595
Wire Rope Length 3 m
Length 1 (L1) 356 – 546 mm
Length 2 (L2) 318 – 508 mm
Height (H) 35 mm
Width (W) 41 mm
Thickness (T) 1 mm
A 57.6 mm
B 23.2 mm
C 6.1 mm
D 22.2 mm
E 46.5 mm
Static Load 1 (F1) 1,330 N
Static Load 2 (F2) 880 N

Note:

  • Static Load 1 represents a distributed load for 12" - 20" (300 - 500 mm) installations and a point load for 12" - 16" (300 - 400 mm) installations. ​Static Load 2 represents a point load for 16" - 20" (400 - 500 mm) installations.

Make an enquiry