Prysmian BICON E1XF NPT Cable Gland (473NP Series)
Prysmian BICON E1XF NPT Cable Gland (473NP Series)

Product overview

Prysmian BICON E1XF NPT Cable Gland (473NP Series) is a brass indoor and outdoor cable gland for use in hazardous locations. Suitable for use with all braid wire armoured cables.
Part Numbers: 473NP-03, 473NP-04, 473NP-07, 473NP-05, 473NP-08, 473NP-10, 473NP-14, 473NP-15, 473NP-20, 473NP-21, 473NP-27, 473NP-28, 473NP-32, 473NP-33, 473NP-38, 473NP-44, 473NP-45.

Prysmian 473NP Features

  • Brass indoor and outdoor cable gland for use in hazardous areas.
  • Suitable for circular, Braid steel wire armour cables with extruded polymeric bedding and oversheath.
  • Achieves IP66 seal onto cable and to enclosure with suitable sealing washer or thread sealant.
  • Three part armour lock provides mechanical cable retention and electrical continuity.
  • Inner PCP seal grips cable bedding and provides additional ingress protection.
  • Prysmian BICON 473NP Cable Gland is suitable for most climatic conditions – weatherproof and waterproof.
  • Standard and Nickel plated versions available.
  • Full installation instructions supplied.
  • *NPT Threaded glands are supplied as glands only.
  • **Other NPT sizes are available upon request.

Technical Data

  • Certified II 2GD, Ex e II & Ex d IIC under ATEX directive 94/9/EC.
  • Atex Compliance Standards: EN 60079-0, EN 60079-1, EN 60079-7, EN 61241-0, EN 61241-1.
  • Certificate number Sira 02ATEX3092X.
  • IECEx Compliance Standards: IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0, IEC 61241-1.
  • Certificate number IECEx SIR 10.0071X
  • Service temperature range -60°C to +90°C.

Additional Information

May be used in:

  • Zones 0 , 1 & 2 with Ex ia IIA , B & C equipment.
  • Zones 1 & 2 with Ex ib IIA , B & C equipment.
  • Zones 1 & 2 with Ex e II equipment.
  • Zone 2 with Ex nA II equipment.
  • Zones 21 & 22 with Ex tD A21.

Where the cable is effectively filled, may also be used in:

  • Zones 1 & 2 with Ex d IIC equipment not containing a source of ignition & with a volume less than 2000 cm3.
  • Zones 1 & 2 with Ex d IIA & Ex d IIB equipment not containing a source of ignition & with any volume.
  • Zone 1 with Ex d IIA & Ex d IIB equipment containing a source of ignition & with a volume less than 2000 cm.
  • Zone 2 with Ex d IIA & Ex d IIB equipment containing a source of ignition & with any volume.
  • Zone 2 with Ex nR II equipment.

For more information on Prysmian BICON E1XF NPT Cable Gland (473NP Series), please consult Datasheet below.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Design Reference (Standard) Design Reference (Nickel Plated) Size Under Armour Ø (A) mm Min Under Armour Ø (A) mm Max  Overall Ø (B) mm Min Overall Ø (B) mm Max Braid Armour Wire Ø Entry Thread (D) Thread Length (E) Protrusion Length (F) Hexagon A/F (G) Hexagon A/C (H)
473NP-03 473NP-03V ½"- 16 3.8 8.7 8.0 13.2 0.2/0.3 ½" NPT 15.5 41 23.4 26.7
473NP-04 473NP-04V ½"- 20S 8.0 8.7 8.0 15.8 0.2/0.3 ½" NPT 15.5 43 25.7 29.2
473NP-07 473NP-07V ¾"- 20S 8.0 11.8 8.0 15.8 0.2/0.3 ¾" NPT 16.4 43 27.9 31.8
473NP-05 473NP-05V ½"- 20 11.8 14.2 11.7 20.8 0.2/0.3 ½" NPT 15.5 43 30.5 34.0
473NP-08 473NP-08V ¾"- 20 11.8 20.1 11.7 20.8 0.2/0.3 ¾" NPT 16.4 43 30.5 34.0
473NP-10 473NP-10V ¾"- 25 14.0 26.6 17.0 27.2 0.2/0.3 ¾" NPT 16.4 48 37.6 42.2
473NP-14 473NP-14V 1"- 25 14.0 32.4 17.0 27.2 0.2/0.3 1" NPT 19.5 48 37.6 42.2
473NP-15 473NP-15V 1"- 32 19.7 38.4 23.5 33.5 0.3/0.45 1" NPT 19.5 53 47.2 53.6
473NP-20 473NP-20V
1¼"-32
19.7 44.3 23.5 33.5 0.3/0.45 1¼" NPT 20.5 53 47.2 53.6
473NP-21 473NP-21V
1¼"-40
26.6 50.3 29.0 39.9 0.3/0.45 1¼" NPT 20.5 56 56.4 61.5
473NP-27 473NP-27V 1 ½"- 40 26.6 56.2 29.0 39.9 0.3/0.45 1 ½" NPT 21 56 56.4 61.5
473NP-28 473NP-28V 1 ½"- 50S 32.4 32.2 38.0 46.2 0.3/0.45 1 ½" NPT 21 61 60.0 66.0
473NP-32 473NP-32V 2"- 50 38.4 74.0 39.5 52.6 0.3/0.45 2" NPT 22 61 70.1 77.2
473NP-33 473NP-33V 2"- 63S 44.3 68.1 50.0 58.9 0.3/0.45 2" NPT 22 64 75.0 83.0
473NP-38 473NP-38V 2 ½"- 63 50.3 74.0 51.3 65.3 0.3/0.45 2 ½" NPT 32.5 64 80.0 87.4
473NP-44 473NP-44V 3"-75S 56.2 62.2 62.0 71.6 0.3/0.45 3" NPT 32.5 73 90.2 99.1
473NP-45 473NP-45V 3"- 75 62.2 74.0 62.5 78.0 0.3/0.45 3" NPT 33.5 73 98.8 109.2

Technical Information

  • Certified II 2GD, Ex e II & Ex d IIC under ATEX directive 94/9/EC.
  • Atex Compliance Standards: EN 60079-0, EN 60079-1, EN 60079-7, EN 61241-0, EN 61241-1.
  • Certificate number Sira 02ATEX3092X.
  • IECEx Compliance Standards: IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 61241-0, IEC 61241-1.
  • Certificate number IECEx SIR 10.0071X
  • Service temperature range -60°C to +90°C.
E1XF (NPT) Ex d IIC - Ex e II Cable Gland 473NP Series technical

Additional Information

May be used in:

  • Zones 0 , 1 & 2 with Ex ia IIA , B & C equipment.
  • Zones 1 & 2 with Ex ib IIA , B & C equipment.
  • Zones 1 & 2 with Ex e II equipment.
  • Zone 2 with Ex nA II equipment.
  • Zones 21 & 22 with Ex tD A21.

Where the cable is effectively filled, may also be used in:

  • Zones 1 & 2 with Ex d IIC equipment not containing a source of ignition & with a volume less than 2000 cm3.
  • Zones 1 & 2 with Ex d IIA & Ex d IIB equipment not containing a source of ignition & with any volume.
  • Zone 1 with Ex d IIA & Ex d IIB equipment containing a source of ignition & with a volume less than 2000 cm.
  • Zone 2 with Ex d IIA & Ex d IIB equipment containing a source of ignition & with any volume.
  • Zone 2 with Ex nR II equipment.

 

 

Find out more about our products or becoming a supplier