Prysmian BICON MPJEM Industrial Cable Joints (LV)
Prysmian BICON MPJEM Industrial Cable Joints (600/1000V) are straight joints for LV cables, suitable for use with SWA cables to BS5467, BS6346 and IEC502 with polymeric insulation and copper conductors from with copper conductors from 1.5mm² to 400mm².
Prysmian Part Numbers: MPJEMJ1, MPJEMJ2, MPJEMJ3, MPJEMJ4, MPJEMJ5, MPJEMJ6, MPJEMJ7, MPJEMJ8
- Tested and approved to BS EN 50393 and ENATS TS C81/3.
- Includes a constant force spring armour bond.
- Utilizes Prysmian’s Low hazard isocyanate free JEM resin.
- Utilizes Compact joints shells which minimizes the joint footprint.
- Requires compression connectors (sold separately)
Prysmian BICON Cable Joints
For many years, BICON has been in the forefront of jointing technology, from designs using bituminous filling compounds, to the development of the highly successful BICAST acrylic resin jointing system.
Most recently , we have supplemented these ranges with heat shrink and pre-moulded products (BIMOLD) and can now offer a unique package to satisfy all requirements.
All four systems are available at voltages up to or above 33 kV and, depending on application, each may offer benefits over the others.
For instance, termination of high voltage polymeric cables requiring the facility to disconnect or add in additional cables at a later stage, means that BIMOLD is the logical choice. Likewise, BICAST provides a fast, comprehensive jointing method with a versatile range covering low and high voltage and all cable types.
Download PDF file for Prysmian BICON MPJEM Industrial Cable Joints (MPJEMJ1, MPJEMJ2, MPJEMJ3, MPJEMJ4, MPJEMJ5, MPJEMJ6, MPJEMJ7, MPJEMJ8) Technical Data.
*Technical Data subject to change without notice.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
|Two Core||Three Core||Four Core||Five Core||Connector|
|4 mm2||MPJEMJ1||MPJEMJ1||MPJEMJ1||MPJEMJ4||BEYS/ BT6CS|
*: Does not accomodate cross core (phase to phase) jointing
Note: MPJEM Joints are provided without connectors, compression connectors can be provided separately.
|Joint Reference||Min Box Entry ØA (mm)||Max Box Entry ØB (mm)||Box Length C (mm)||Internal ØD (mm)
Find out more about our products or becoming a supplier