+44 (0)1744 762 929
Telcleat-385AA01-Series-Single-Way-Cleat-BICON-Prysmian-Draka-Telecleat-Tower-SWA-Cable-Cleats- 612-877

Product overview

Prysmian BICON Single Way Telcleat 385AA01 (Telecleat) is a single piece cleat which provides protection against all weather conditions and simple installation on a one piece, single fixing design.
RS Components Equivalent Part No: U385RS01
RS Stock No: 612-877


  • SWA Cable Cleat, suitable for use with cable diameters 10.5mm to 14.5mm.
  • Manufactured from Low Density Polythene.
  • Overlapping self-adjusting ranges.
  • Sunlight (UV) and weather resistant.
  • One piece, single fixing design.
  • Can be double stacked on a single fixing.
  • Operating temperature -40ºC to +60ºC.
  • Prysmian BICON Single Way Telcleat 385AA01 (Telecleat) Series is tested in accordance with BS EN 50368.
  • Part Numbers: 385AA01, U385RS01, 612-877.
  • Standard Pack Quantity: 100pcs.


FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Design Number Cable Diameter A (mm) Min Cable Diameter A (mm) Max Standard Pack Quantities Dimensions (mm) B Min Dimensions (mm) B Max Dimensions (mm) C Max Dimensions (mm) D Weight (g) Roundhead Woodscrew masonry, concrete or wood ins X No Screw Bolt for Cable Tray mm
385AA01 10.5 14.5 100 15 18 32 12 2.3 1 1/4 x 8 M4 x 30

    Make an enquiry

    Performance Data

    Test Standard EN 50368:2003
    Type 6.12 Non-Metallic
    Impact Resistance 6.2.4 Heavy -> 6.2.5 V.Heavy
    Lateral Load 0.188 -> 0.775 kN
    Axial Load 0.046 -> 1.118 kN
    Needle Flame  >60 secs

    Method Of Fixing

    This single way cleat is opened and placed around the cable so that the end of the cleat containing the slot will be in contact with the mounting surface, except for the 385AA01, which should be be reversed to put the slot uppermost. In this case an M5 washer should be used to prevent the nut entering the slot of the cable cleat. When mounting directly on channel section an adaptor plate should be used.

    *Technical information subject to change without notice