REPL RCFB Flexible Insulating Bushing Boot Kits
REPL RCFB Flexible Insulating Bushing Boot Kits (RCFB-0, RCFB-1, RCFB-3, RCFB-4) are cold applied systems to provide insulation enhancement for MV cable termination, installed in dry air filled cable boxes up to 24kV. Suitable for use in switchgear and transformer cable boxes where the air clearances are not sufficient to prevent electrical flashover due to high humidity or rodents.
Manufactured from a highly insulating and anti-track material with excellent weathering properties for a durable long life installation. Allow for either a straight or right angled configuration and will fit over standard heat shrink or cold applied terminations. Installed easily without special tooling and can be removed for testing and then reinstalled.
Key Features & Benefits
- Unlimited shelf life
- Fully tested in accordance to HD629.1-S1, IEC 60502-4
- Kits designed to cover a wide range of cable sizes
- One size covers right angled or straight installation
- Works with standard heat shrink or cold shrink terminations
REPL RCFB Kit Contents
Each Kit contains:
- Set of 3 Elastomeric flexible bushing boots (bushing adaptors for RFCB-0)
- Silicone Grease
- Installation Instructions
For Additional Information on REPL RCFB Flexible Insulating Bushing Boot Kits (RCFB-0, RCFB-1, RCFB-3, RCFB-4), please advise Technical Data table or PDF File below.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929
|PART NO||DESCRIPTION||COLOUR||MAX VOLTAGE||CABLE RANGE||BUSHING DIAMETER RANGE|
|RCFB-0||Set of 3 Bushing Adaptors||Red||17,5 kV||-||30-45 mm|
|RCFB-1||Set of 3 Bushing Boots||Red||17,5 kV||35-630 mm2||46-70 mm|
|RCFB-3||Set of 3 Bushing Boots||Grey||24 kV||25-400 mm2||46-70 mm|
|RCFB-4||Set of 3 Bushing Boots||Grey||24 kV||400-630 mm2||46-70 mm|
Find out more about our products or becoming a supplier