+44 (0)1744 762 929
Snake Tray 454 Series - Cable Tray & Accessories (CM 454-2-8, CM 454-4-8, CM 454-6-8)

Product overview

Snake Tray 454 Series – Accessories include Connector Bolts, Universal 201 Series Intersection, Beam Clamp for 3/8″ Threaded Rod, Pedestal Mount Brackets, Seismic Bracing Kits, Concrete Anchors, Hanger Brackets for Threaded Rod Suspension and Attachment Hardware for 454 series cable tray.

Snake Tray 454 Series – Cable Tray & Accessories is the next generation in our hand bendable cable trays that can be mounted overhead or on a wall in one easy-to-install system.

Snake Tray is the world’s only hand-bendable cable tray that requires no labor-intensive cutting and clipping in order to construct fast cable tray bends. Installs overhead, on walls and under access floors.

Its hand bendable design combined with Snake Tray’s built-in mounting hardware gives Snake Tray the installation cost saving advantage over any other cable tray system in today’s market. Installers are able to create turns in 10 seconds versus 20 minutes with wire mesh cable tray!

Snake Tray 454 Series Features

  • Patented hand bendable design (No fabrication required)
  • Built-in mounting/hanging hardware can be suspended overhead or mounted to the wall
  • Single connection creates both mechanical and electrical bond
  • Hangs or mounts from a single Point
  • Trays nest together for compact and cost effective shipping and material handling
  • Open architecture for easy loading of cable

Snake Tray 454 Series – Accessories

Snake Tray 454 Series Accessories (Connector Bolts, Universal 201 Intersections, Beam Clamps, Pedestal Mount Brackets)

Universal Tray Connector Bolt

The CB-10 provides both a mechanical and electrical connection when joining the tray sections to one another. Only one CB-10 required per connection.

Part No: CB-10


Snake Tray 454 Series Accessories (Connector Bolts, Universal 201 Intersections, Beam Clamps, Pedestal Mount Brackets)

Universal Inline Connector Bolt

Provides a mechanical and a bonded electrical connection when joining tray sections to one another. Only one CB-12 required per connection.

Part No: CB-12


Universal 201 Series Intersection

Universal 201 Series Intersection

Installed as 4-way crossing intersection component for the 201 Snake Tray Series.

Part No: CM 0303H, Size: 5 ½” x 5 ½”


Beam Clamp for 3/8″ Threaded Rod

Beam Clamp for 3/8″ Threaded Rod

Part No: BC-201-A


Pedestal Mount Bracket for 201 Series

Pedestal Mount Bracket for 201 Series

Used to attach single pocket 201 series Snake Tray to the floor pedestals utilized in the construction of raised access floors.

Part No: ST-201


Seismic Bracing Kits with Crimp Tool & Cutter

Seismic Bracing Kits with Crimp Tool & Cutter

Part Nos:
CM201/801-SBK1-XX: Kit for Anchoring Snake Tray and Mega Snake in Concrete Ceilings
CM 201/801-SBK-J-XX: Kit for Anchoring Snake Tray and Mega Snake around Joists
CM 201/801-SBK-L-XX: Kit for Anchoring Snake Tray and Mega Snake with Lag Bolts into Wood Beams
CM 201/801-SB-CT: Crimp Tool
CM 201/801-SB-CU: Cutter

*XX Denotes size


Threaded Rod

Threaded Rod

Pre-cut and pre-chased threaded rod for overhead tray installations. All rods are 3/8″-16 10/24 high strength steel as per ASTM A36 and available in 1′, 2′, 3′, 4′ 6′, and 8′ lengths. Rods are inserted through the patented Snake Eyes and secured with two 3/8″ hex nuts and one flat washer. No additional mounting accessories are necessary.

Part No: TR-1, Size: 3/8″ x 12″ Threaded Rod
Part No: TR-2, Size: 3/8″ x 24″ Threaded Rod
Part No: TR-3, Size: 3/8″ x 36″ Threaded Rod
Part No: TR-4, Size: 3/8″ x 48″ Threaded Rod
Part No: TR-6, Size: 3/8″ x 72″ Threaded Rod
Part No: TR-8, Size: 3/8″ x 96″ Threaded Rod


Concrete Wedge Anchor

Concrete Wedge Anchor

Anchor diameter equals hole diameter. Comes complete with nuts and washers ready for use. Collar expander offers 360° contact with masonry. Projections on collar immediately grip concrete.

Part Nos: CM WA-XX

*XX Denotes size


Concrete Anchor

Concrete Anchor

Stud type anchor design allows easy through-type fastenings and can be set in bottomless hole. Pre-assembled anchor ensures easy and fast installation. Anchor size is same as drill bit size for easy installation. Comprehensive testing to ensure high performance in block, masonry and concrete base materials. Bulged middle section with round and diamond shaped openings prevents the anchors from spinning in the hole or dropping out when setting it overhead. Anchors 101 and 407 series of any applications with a 1/4″ hole.

Part Nos: CM CA-38


Hanger Bracket for Threaded Rod Suspension

Hanger Bracket for Threaded Rod Suspension

Hanger bracket for powder-actuated fastening. Design allows for easy installation using any 8 mm power actuated fastening system. Available for both steel and concrete. The New, Versatile Hanger that Simplifies Threaded Rod Suspension.

Part Nos: CM TR-HBS for Steel, CM TR-HBC for Concrete


Snake Tray 454 Series Accessories (Connector Bolts, Universal 201 Intersections, Beam Clamps, Pedestal Mount Brackets) Attachment Hardware

Attachment Hardware

Part No: CM FW-38, Size: Zinc Plated 3/8″ Washer
Part No: CM HN-38, Size: Zinc Plated 3/8″ Hex Nut
Part No: CM RC-38, Size: ZZinc Plated 3/8″ Rod Coupling



Cable Tray Connector Bolts, Universal 201 Intersections, Beam Clamps, Pedestal Mount Brackets
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.

Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

SNAKE TRAY 454 SERIES – CABLE TRAY

Drawing Part Number Physical Dimensions Loading Dimensions Physical Volume Cable Capacity Weight Finish
Snaketray CM 454-2-8 CM 454-2-8 3¾"H x 8’L x 2⅜"W 2"D 3 si 30 3 # G/SS/PC
Snaketray CM 454-4-8 CM 454-4-8 5¾"H x 8’L x 4⅜"W 4"D 12 si 120 5 # G/SS/PC
Snaketray CM 454-6-8 CM 454-6-8 7¾"H x 8’L x 6⅜"W 6"D 28 si 260 7 # G/SS/PC

For best results it is recommended that Snake Tray be anchored every 4 to 5 feet.
Cable capacity based on 50% fill as per nec article 3
92.9B 0.25 OD
Finishes: Mechanically applied Galvanised Finish (G), Stainless Steel (SS), Powder Coated (PC).

Make an enquiry