Snake Tray 501 Series - Cable Tray & Accessories

Product overview

Snake Tray 501 Series – Accessories include Connector Bolts, Connection Adapters, Universal Intersections, Cable Drop-Out Waterfall, I-Beam Clamps and Concrete Anchors (501 Series Wall Snake).

Snake Tray 501 Series – Cable Tray & Accessories is the perfect solution for long linear installations where space is at a premium. This cable management system allows the tray to be directly attached to a wall without brackets using integrated mounting rings located along the center spine of the tray. These mounting rings eliminate the need for additional brackets or hanging hardware to complete the installation.

Snake Tray is the world’s only hand-bendable cable tray that requires no labor-intensive cutting and clipping in order to construct fast cable tray bends. Installs overhead, on walls and under access floors.

Its hand bendable design combined with Snake Tray’s built-in mounting hardware gives Snake Tray the installation cost saving advantage over any other cable tray system in today’s market. Installers are able to create turns in 10 seconds versus 20 minutes with wire mesh cable tray!

Snake Tray 501 Series Features

  • Patented hand bendable design (no fabrication required)
  • Built-in mounting/hanging hardware
  • Single connection provides both mechanical and electrical bond
  • Hangs from a single point
  • Trays nest together for compact and cost effective shipping and material handling
  • Open architecture allows for easy loading of the cable

Snake Tray 501 Series – Accessories

accessories for Snake tray 501 i-beam clamp

Universal Tray Connector Bolt

The CB-10 provides both a mechanical and electrical connection when joining the tray sections to one another. Only one CB-10 required per connection.

Part No: CB-10


Universal Inline Connector Bolt

Provides a mechanical and a bonded electrical connection when joining tray sections to one another. Only one CB-12 required per connection.

Part No: CB-12


201 to 501 Series Connection Adapter

201 to 501 Series Connection Adapter

Used to adapt 201 series to 501 series trays.

Part No: CM 201/501T, Size: 5 ¼” x 5 ¼”


Universal 201/501 Series Intersection

Universal 201/501 Series Intersection

Installed as “T” component for the Snake 201 and 501 series trays.

Part No: CM 0303T, Size: 5 ½” x 5 ½”


Cable Drop-Out Waterfall

Cable Drop-Out Waterfall

Provides a smooth transition for cables when exiting the tray. Maintains a consistent 4″ radius eliminating kinked cables. Easily attaches to tray with cable ties.

Part No: TO-2, Size: 2″
Part No: TO-3, Size: 3″
iPart No: TO-425, Size: 4½”
Part No: TO-5, Size: 5″
Part No: TO-6, Size: 6″


Snake Tray 501 Series - Accessories (Connection Adapters, Universal Intersections, Cable Drop-Out Waterfall, I-Beam Clamps)

I-Beam Clamp

Bracket for 501 Series Tray to I-Beam.

Part No: CM 501-IBW


Concrete Wedge Anchor

Concrete Wedge Anchor

Anchor diameter equals hole diameter. Comes complete with nuts and washers ready for use. Collar expander offers 360° contact with masonry. Projections on collar immediately grip concrete.

Part Nos: CM WA-XX

*XX Denotes size


Concrete Anchor

Concrete Anchor

Stud type anchor design allows easy through-type fastenings and can be set in bottomless hole. Pre-assembled anchor ensures easy and fast installation. Anchor size is same as drill bit size for easy installation. Comprehensive testing to ensure high performance in block, masonry and concrete base materials. Bulged middle section with round and diamond shaped openings prevents the anchors from spinning in the hole or dropping out when setting it overhead. Anchors 101 and 407 series of any applications with a 1/4″ hole.

Part Nos: CM CA-38


Snake Tray 501 Series - Accessories (Connection Adapters, Universal Intersections, Cable Drop-Out Waterfall, I-Beam Clamps)

Concrete Anchor for 501 Series Wall Snake

Stud type anchor design allows easy through-type fastenings and can be set in bottomless hole. Pre-assembled anchor ensures easy and fast installation. Anchor size is same as drill bit size for easy installation. Comprehensive testing to ensure high performance in block, masonry and concrete base materials. Special design prevents the anchors from spinning in the hole. Anchor won’t drop out while setting overhead.

Part No: CM 501-CA


Snake Tray 501 Series – Accessories (Connection Adapters, Universal Intersections, Cable Drop-Out Waterfall, I-Beam Clamps)
FREE Technical Advisory Service

E-Tech Components UK Ltd maintains a free technical advisory service.

Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Drawing Part Number Physical Dimensions Loading Dimensions Physical Volume Cable Capacity Weight Finish
Snaketray CM 501-2-8 CM 501-2-8 3½"H x 8'L x 2½" 2"D x 2"W 4 si 40 4 # G/SS/PC
Snaketray CM 501-3-8 CM 501-3-8 4½"H x 8'L x 3½"W 3"D x 3"W 9 si 92 4½ # G/SS/PC
CM 501-5-8 CM 501-5-8 6½"H x 8'L x 5½"W 5"D x 5"W 25 si 255 5½ # G/SS/PC
CM 501-6-8 CM 501-6-8 7½"H x 8'L x 6½"W 6"D x 6"W 36 si 367 7 # G/SS/PC

Find out more about our products or becoming a supplier