Prysmian BICON Universal Cable Jointing Kits - JST Series (Low Voltage) (JST6, JST16, JST35, JST95, JST185, JST300, JST400)

Product overview

Prysmian BICON JST Universal Cable Joints (LV)

Prysmian BICON JST Universal Cable Joints (600/1000V) are straight joints for LV cables, Suitable for use with SWA cables to BS5467, BS6346 and IEC502 with polymeric insulation and copper and aluminium conductors from 1.5mm² to 400mm².
Part Numbers: JST6, JST16, JST35, JST95, JST185, JST300, JST400

  • Tested and approved to BS EN 50393 and ENATS TS C81/3.
  • Includes a constant force spring armour bond.
  • Utilises Prysmian’s Low hazard isocyanate free JEM resin.
  • Utilises transparent shells which offer greater visibility during installation and are sized to allow the use of either compression or mechanical connectors (sold separately)

Prysmian BICON Cable Joints

For many years, BICON has been in the forefront of jointing technology, from designs using bituminous filling compounds, to the development of the highly successful BICAST acrylic resin jointing system.

Most recently, we have supplemented these ranges with heat shrink and pre-moulded products (BIMOLD). We can now offer a unique package to satisfy all requirements.

All four systems are available at voltages up to or above 33 kV. Depending on application, each may offer benefits over the others.

For instance, termination of high voltage polymeric cables requiring the facility to disconnect or add in additional cables at a later stage, means that BIMOLD is the logical choice. Likewise, BICAST provides a fast, comprehensive jointing method with a versatile range covering low and high voltage and all cable types.

Download PDF file for Prysmian BICON JST Universal Cable Joints (LV) (JST6, JST35, JST185) Technical Data.

*Technical Data subject to change without notice.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

JOINT SELECTION

Nominal Conductor
Cross Section
Two Core Three Core Four Core Five Core
1.5 mm2 JST6 JST6 JST6 JST6
2.5 mm2 JST6 JST6 JST6 JST6
4 mm2 JST6 JST6 JST6 JST6
6 mm2 JST6 JST6 JST6 JST6
10 mm2 JST6 JST16 JST16 JST16
16 mm2 JST16 JST16 JST16 JST16
25 mm2 JST16 JST16 JST35 JST35
35 mm2 JST35 JST35 JST35 JST35
50 mm2 JST95 JST95 JST95
70 mm2 JST95 JST95 JST95
95 mm2 JST95 JST95 JST95
120 mm2 JST185 JST185 JST185
150 mm2 JST185 JST185 JST185
185 mm2 JST185 JST185 JST185
240 mm2 JST300 JST300 JST300
300 mm2 JST300 JST300 JST300
*400 mm2 JST400 JST400 JST400

 

Note: JST joints are provided without connectors, compression or mechanical connectors can be provided separately.

SHELL DIMENSIONS

Joint Reference A (mm) B (mm) C (mm) Min Box Entry ØD (mm)
Max Box Entry ØE (mm)
JST6 240 115 75 12 22
JST16 310 125 85 20 35
JST35 390 130 100 24 40
JST95 620 160 130 27 51
JST185 795 230 205 40 65
JST300 950 240 210 55 80
JST400 1100 275 260 56 92

Find out more about our products or becoming a supplier