Nexans Euromold 400T1/ 400AR-1/ 400AR-2 Equipment Bushings
Nexans Euromold 400T1/ 400AR-1/ 400AR-2 Equipment Bushings

Product overview

Nexans Euromold 400T1 Equipment Bushing

Nexans Euromold 400T1/ K400T1/ M400T1 Equipment Bushings are MV-HV Bushings for use in equipment insulated with oil fluid, typically for transformers, switchgear, capacitors that are specified to terminate and connect medium/high voltage cables in the following voltage classes:

  • 6/10 (12kV)
  • 6.35/11 (12kV)
  • 8.7/15 (17.5kV)
  • 12/20 (24kV)
  • 12.7/22 (24kV)
  • 18/30 (36kV)

Technical Characteristics

  • Each bushing is tested for AC withstand and partial discharge prior to leaving the factory.
  • The plug-in type equipment bushings are moulded epoxy insulated parts and meet the requirements of IEC 60137. The (K)(M)400T1 also meets CENELEC EN 50180.

Specification & Design

To order the equipment bushing, specify the type. The bushings can be supplied with an earth jumper (/J) or an earth plate (/GS). This earth connection must be specified when ordering (e.g. K400T1/J):

Euromold Equipment
Bushing Type		 Voltage
Um		 Current
Ir
400T1 12 kV 400 Amps
K400T1 24 kV 400 Amps
M400T1 36 kV 400 Amps

 

Note: For dimensions of the above bushing types, refer to the Technical Data Table below.

Nexans Euromold 400T1 Fixings for Bushings

EUROMOLD 400T1 400AR-1 400AR-2 FIXINGS FOR EQUIPMENT BUSHINGS

 

For Ordering Instructions and Part Number Selection Table of Nexans Euromold 400T1/ K400T1/ M400T1 Equipment Bushings, please refer to the Technical Data Table Below. For additional General and Technical Information, download PDF File.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

ORDERING INSTRUCTIONS

To order the equipment bushing, specify the type. The bushings are supplied with an earth jumper (/J) or an earth plate (/GS).

This earth connection must be specified when ordering (e.g. K400T1/J).
EQUIPMENT BUSHING TYPE VOLTAGE
Um		 CURRENT
Ir		 A B C D E Dia. F Dia. G Dia. H
400T1 12 kV 400 Amps 310 mm 144 mm 30 mm M12 22 mm 88 mm 128 mm 16 mm
K400T1 24 kV 400 Amps 310 mm 144 mm 30 mm M12 22 mm 88 mm 128 mm 16 mm
M400T1 36 kV 400 Amps 310 mm 144 mm 30 mm M12 22 mm 88 mm 128 mm 16 mm

Find out more about our products or becoming a supplier