Nexans Euromold Interface B Accessories
Product overview
Nexans Euromold Interface B Accessories
Nexans Euromold Interface B (400 Series) Accessories for use with connectors and bushings with an interface B as described by CENELEC EN 50180 and 50181.
Euromold Part Numbers: 400DR, 400SOP, 400GP, 400BIPA, 400CP-SC, 400RTPA, KIT MT.
Voltage classes:
- 6/10 (12kV)
- 6.35/11 (12kV)
- 8.7/15 (17.5kV)
- 12/20 (24kV)
- 12.7/22 (24kV)
- 18/30 (36 kV)
- 19/33 (36kV)
Technical Characteristics
- All Euromold Interface B (400 Series) Accessories, except the earthing plug, are tested for AC withstand and partial discharge prior to leaving the factory.
Nexans Euromold Interface B Accessories
 |
400DR Dead-end ReceptacleEuromold 400DR Dead-end Receptacle fits over a bushing with a type B interface to provide ‘dead-end’ facility. Is used with a 400BA restraint bail. Order 400DR for 12 kV, K400DR for 24 kV or M400DR for 36 kV applications. Can be supplied with integral earth lead: add -/G. |
|
|
|
 |
400SOP Stand-off PlugEuromold 400SOP Stand-off Plug is designed to support and ‘dead-end’ connectors with a type B interface when removed from equipment. Order 400SOP for 12 kV, K400SOP for 24 kV or M400SOP for 36 kV applications. |
|
|
|
 |
400GP Earthing PlugEuromold 400GP Earthing Plug is designed to support and earth connectors with a type B interface when removed from equipment. Order 400GP for 12 kV, 24 or 36 kV applications. |
|
|
|
 |
400BIPA Basic Insulating Plug400BIPA Basic Insulating Plug acts as a tightening nut for the 400TE tee connector kit. The plug contains a voltage detection point. The conductive rubber protection cap is included. Order 400BIPA for 12 kV, K400BIPA for 24 kV or M400BIPA for 36 kV applications. |
|
|
|
 |
400CP-SC Connecting Plug400CP-SC Connecting Plug for connecting a 400TE and one or more 430TB, 400TB or 440TB connectors, thus creating a multiple cable connection to equipment. Order 400CP-SC for 12 kV, K400CP-SC for 24 kV or M400CP-SC for 36 kV applications. |
|
|
|
 |
400RTPA Reducing Tap Plug400RTPA Reducing Tap Plug provides a type A interface to a 400TE connector. A ‘C’ spanner, 600SW, is used to tighten the reducing tap plug on to its mating part. Order 400RTPA for 12 kV or K400RTPA for 24 kV applications. Order 600SW for the ‘C’ spanner. |
|
|
|
 |
400 MT Earthing Kit for Cu Tape Screened Cables400 MT Earthing Kit for Cu Tape Screened Cables contains a tinned copper braid (25 mm² – L=500 mm), a tinned copper wire for cleating and water sealing mastic. Order Kit MT for 12 kV, 24 kV or 36 kV applications. |
|
|
|
For additional General and Technical Information, download PDF File.
FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929