Nexans Euromold 804PB-58 Coupling Connector (804PB-58/G, K804PB-58/G, M804PB-58/G, P804PB-58/G)
Nexans Euromold 804PB-58 Coupling Connector (804PB-58/G, K804PB-58/G, M804PB-58/G, P804PB-58/G)

Product overview

Nexans Euromold 804PB-58 Separable Coupling Connector

Nexans Euromold 804PB-58 Separable Coupling Connector is a coupling connector (bolted type) for dual arrangement. Designed to be used with 784TB Separable Tee Connectors (Aluminium & Copper) and meets the requirements of CENELEC HD 629,1.
Type 804PB-58 Part Numbers: 804PB-58/G, K804PB-58/G, M804PB-58/G, P804PB-58/G.

Euromold 804PB-58 is a bolted separable coupling connector specified to terminate and connect medium/high voltage cables in the following voltage classes:

  • 6/10 (12kV)
  • 6.35/11 (12kV)
  • 8.7/15 (17.5kV)
  • 12/20 (24kV)
  • 12.7/22 (24kV)
  • 18/30 (36kV)
  • 19/33 (36kV)
  • 20.8/36 (42kV)

Technical Characteristics

  • The thick conductive EPDM jacket provides a total safe to touch screen which ensures safety for personnel.
  • Each separable connector is tested for AC withstand and partial discharge prior to leaving the factory.

Specification & Design

The 804PB-58 separable connector meets the requirements of CENELEC HD 629,1.

Euromold
Type 804PB-58		 Voltage
Um		 Current
Ir		 Conductor Size
Min-Max
804PB-58/G 12 kV 1250 Amps 50-630 mm2
K804PB-58/G 24 kV 1250 Amps 35-630 mm2
M804PB-58/G 36 kV 1250 Amps 35-630 mm2
P804PB-58/G 42 kV 1250 Amps 35-630 mm2

 

Nexans Euromold 804PB-58 DesignSeparable connector comprising:

  1. Interface designed to fit 784TB connector (Aluminium & Copper)
  2. Conduct Rod type 5/8″
  3. Conductor connector (hexagonal crimping, deep indent crimping or bolted)
  4. Conductive EPDM insert
  5. Conductive EPDM jacket
  6. Insulating EPDM layer moulded between the insert and the jacket
  7. Cable reducer
  8. Conductive EPDM cap
  9. Basic Insulating Plug 858 BIPA (with VD point)
  10. Earthing lead

The screen break design enables cable outer sheath testing without removing or dismantling the connector.

804PB-58 Coupling Connector Kit Contents

The complete (K)(M)(P)804PB-58/G connector kit comprises the following components. The kit also comprises silicone grease, field control mastic, gloves, wipers, roll adhesive tape, installation instructions and crimp chart.

Nexans Euromold 804PB-58 Kit

For Ordering Instructions and Part Number Selection Table of Nexans Euromold 804PB-58 Separable Coupling Connector (804PB-58/G, K804PB-58/G, M804PB-58/G, P804PB-58/G), please refer to the Technical Data Table Below. For additional General and Technical Information, download PDF File.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

ORDERING INSTRUCTIONS FOR (K)(M)(P)804PB-58

To order the coupling connector, select the ordering part number which gives you the best centring of your core insulation diameter and substitute X using table X, according to your conductor size and type. Add a 'K' for use up to 24 kV, add an 'M' for use up to 36 kV and a 'P' for use up to 42 kV.

Example: The copper wire screened cable is 36 kV, 240 mm2 stranded aluminium with a diameter over core insulation of 37 mm. Order 3 x M804PB-58/G-S-32-240BI2 connector kit.
PART NUMBER DIAMETER OVER CORE INSULATION MIN DIAMETER OVER CORE INSULATION MAX
804PB-58/G-S-15-X 16mm 22 mm
804PB-58/G-S-19-X 20 mm 26.5 mm
804PB-58/G-S-22-X 23.5 mm 31 mm
804PB-58/G-S-27-X 28.5 mm 37.5 mm
804PB-58/G-S-32-X 34 mm 42.5 mm
804PB-58/G-S-37-X 39 mm 48.5 mm
804PB-58/G-S-43-X 45.5 mm 56 mm

 

TABLE X - ALUMINIUM & COPPER CONDUCTOR
CONDUCTOR SIZE  Alu Conductor
DIN Hexagonal		 Alu Conductor
Deep Indent		 Alu & Cu Conductor
Bolted		 Cu Conductor
DIN Hexagonal
35 mm2 35BI2 35BI1 16.95UN5 35CU2
50 mm2 50BI2 50BI1 16.95UN5, 50.150UN5 50CU2
70 mm2 70BI2 70BI1 16.95UN5, 50.150UN5 70CU2
95 mm2 95BI2 95BI1 16.95UN5, 50.150UN5, 95.240UN5 95CU2
120 mm2 120BI2 120BI1 50.150UN5, 95.240UN5, 120.300UN5 120CU2
150 mm2 150BI2 150BI1 50.150UN5, 95.240UN5, 120.300UN5 150CU2
185 mm2 185BI2 185BI1 95.240UN5, 120.300UN5, 185.400UN5 185CU2
240 mm2 240BI2 240BI1 95.240UN5, 120.300UN5, 185.400UN5 240CU2
300 mm2 300BI2 300BI1 120.300UN5, 185.400UN5 300CU2
400 mm2 400BI2 400BI1 185.400UN5, 400.630UN5 400CU2
500 mm2 500BI2 500BI1 400.630UN5 500CU2
630 mm2 - 630BI1 400.630UN5 630CU2

 

Find out more about our products or becoming a supplier