CCG A2F-FHC Double Compression Cable Gland (0441)
CCG A2F-FHC Double Compression Cable Gland (0441)

Product overview

CCG A2F-FHC Double Compression Cable Gland (0441)

CCG A2F-FHC Double Compression Cable Gland (0441) is a Hazardous Area Glanding Device for Unarmoured Cable Housed In Conduit. Suitable for indoors and outdoors, Group II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.

CCG Part Numbers: 044100-16S, 044100, 0441-0, 044101, 044122, 044102, 044133, 044103, 044144, 044104, 044155, 044105, 044166, 044106, 044177, 044107, 044108, 044199, 044109, 044110

Features & Benefits

  • For indoors and outdoors, Group II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.
  • For use with all types of unarmoured cable housed in rigid or flexible conduit.
  • Fitted with a rotating female conduit coupler.
  • Factory fitted with a specially formulated elastomeric seal for Built-in Safety™, acting on the sheath of the cable.
  • Precision manufactured from high-quality brass (Marine Grade Electroless Nickel Plated™) available in aluminium or stainless steel 316/316L on request.
  • Supplied with a thread sealing gasket (parallel threads only).

CCG A2F-FHC Technical Data

Type: A2F-FHC
Equipment Protection Levels: Ex db IIC, Ex eb IIC, Ex ta IIIC, Ex nR IIC
Gland Material: Brass (Marine Grade Electroless Nickel Plated™), Aluminium, Stainless Steel 316/316L
Seal Material: Standard Thermoset Elastomer or Extreme Temperature Seals
Sealing Gasket Material: HDPE, Nylon 66 or PTFE
Cable Type: Unarmoured Housed in Conduit
Sealing Area: Cable Sheath
Optional Accessories: Adaptor, Reducer, Earth Tag, Locknut, Serrated Washer

Note: The installer should ensure that the materials are suitable for the installation environment.

Installation Standards

  • IEC/BS EN
  • IECEx
  • ATEX
  • UKEX
  • TR CU (Russia)
  • SANS
  • Ingress Protection
  • Deluge Protection
  • Corrosion Protection

Hazardous Areas

A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such locations are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.

Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.

Additional Technical Data on CCG A2F-FHC Double Compression Cable Gland (0441) Part Numbers can be found on the table below. For Conforming Standards & Certificates as well as Fitting Instructions, please advise PDF File.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Product Code Gland Size Ref. Metric Entry Thread (C) Metric Entry Thread (Min D) NPT Entry Thread (C) NPT Entry Thread (Min D) Cable Detail (Min B) Cable Detail (Max B) Max Length (E) Female Conduit Thread Metric G (6g) Female Conduit Thread Metric H (mm) Female Conduit Thread NPT G Female Conduit Thread NPT H (mm) Hexagonal Detail (Max Flats) Hexagonal Detail (Max Crns) Installation Torque Value (Nm)
044100-16S 00-16S M16x1.5 12 - - 1 4 52 M16-M25x1.5 12 ½/¾ 15 24 27 32.5
044100 00-20ss M20x1.5 12 ½/¾ 15 3 8.5 52 M16-M25x1.5 12 ½/¾ 15 24 27 32.5
0441-0 0-20s M20x1.5 12 ½/¾ 15 7 12 50 M16-M25x1.5 12 ½/¾ 15 24 27 32.5
044101 1-20 M20x1.5 12 ½/¾ 15 11 15 52 M16-M25x1.5 12 ½/¾ 15 27 30 32.5
044122 2s-25s M25x1.5 12 ¾/1 15/19 11.5 17.5 51 M25x1.5 12 ¾/1 15/19 35 39 47.5
044102 2-25 M25x1.5 12 ¾/1 15/19 15 20 51 M25x1.5 12 ¾/1 15/19 35 39 47.5
044133 3s-32s M32x1.5 12 1/1¼ 19 16 22 57 M32x1.5 12 1/1¼ 19 42 47 55
044103 3-32 M32x1.5 12 1/1¼ 19 20 26.5 57 M32x1.5 12 1/1¼ 19 42 47 55
044144 4s-40s M40x1.5 12 1¼/1½ 19/21 22 31.5 65 M40x1.5 12 1¼/1½ 19/21 52 59 65
044104 4-40 M40x1.5 12 1¼/1½ 19/21 26 34 65 M40x1.5 12 1¼/1½ 19/21 52 59 65
044155 5s-50s M50x1.5 12 1½/2 21 29 38 73 M50x1.5 12 1½/2 21 65 73 82.5
044105 5-50 M50x1.5 12 1½/2 21 34 44.5 73 M50x1.5 12 1½/2 21 65 73 82.5
044166 6s-63s M63x1.5 12 2/2½ 21/30 38 50 85 M63x1.5 12 2/2½ 21/30 80 90 97.5
044106 6-63 M63x1.5 12 2/2½ 21/30 44.5 56.5 85 M63x1.5 12 2/2½ 21/30 80 90 97.5
044177 7s-75s M75x1.5 12 2½/3 30/32 50 62 86 M75x1.5 12 2½/3 30/32 96 108 115.5
044107 7-75 M75x1.5 12 2½/3 30/32 56 67.5 86 M75x1.5 12 2½/3 30/32 96 108 115.5
044108 8-80 M80x2.0 16 3 32 59 69 98 M80x1.5 16 3 32 96 108 120
044199 9s-90s M90x2.0 16 3/3½ 33 60 75 105 M90x1.5 16 3/3½ 33 111 125 120
044109 9-90 M90x2.0 16 3/3½ 33 73 81.5 105 M90x1.5 16 3/3½ 33 111 125 120
044110 10-100 M100x2.0 16 3/3½/4 34 81 92 106 M100x1.5 16 3/4 34 125 141 120

All dimensions except NPT are in mm. Male Entry Thread ‘C’ and Female Entry Thread ‘B’ can only be any combination of either NPT or Metric threads.
Intermediate thread sizes are available on request. NPT threads should be tightened ‘wrench tight’.

 

Find out more about our products or becoming a supplier