CCG Posi Grip Compression Cable Gland (0545)

Product overview

CCG Posi Grip Compression Cable Gland (0545)

CCG Posi Grip Compression Cable Gland (0545) is a Hazardous Area Glanding Device for Unarmoured Cable. Suitable for highly corrosive Group II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.

CCG Part Numbers: 054500, 0545-0, 054501, 054502, 054503, 054504, 054505, 054506, 054507, 054508, 054509, 054510, 054511

Features & Benefits

  • For highly corrosive Group II, III, Zone 1, 2, 20, 21 and 22 hazardous areas.
  • Complete with a gripper seal, deluge proof seal and elastomeric inner seal for complete explosion and ingress protection IP65/66/68.
  • Brass parts are encapsulated in and protected by a corrosion resistant material.
  • Marine-grade electroless nickel plated entry threads.
  • Precision manufactured from high-quality brass (Marine Grade Electroless Nickel Plated™).
  • Supplied with a thread sealing gasket.

CCG Posi Grip Technical Data

Type: Posi Grip
Equipment Protection Levels: Ex db IIC, Ex eb IIC, Ex ta IIIC, Ex nR IIC
Gland Material: Brass (Marine Grade Electroless Nickel Plated™) encapsulated in Nylon or Glass Reinforced Polyester
Seal Material: Standard Thermoset Elastomer
Cable Type: Unarmoured
Sealing Area: Outer Sheath
Optional Accessories: Adaptor, Reducer, Locknut and Serrated Washer

Note: The installer should ensure that the materials are suitable for the installation environment.

Installation Standards

  • IEC/BS EN
  • IECEx
  • ATEX
  • UKEX
  • INMETRO (Brazil)
  • TR CU (Russia)
  • SANS
  • Ingress Protection
  • Deluge Protection
  • Corrosion Protection
  • Marine ABS
  • DNV-GL

Hazardous Areas

A Hazardous Area is one in which there is potential for an explosion of gases, vapours, mists or dust or a combination of these. Such locations are petrochemical plants, offshore oil rigs, fuel filling stations, timber mills, coal mines, flour mills, paint spray booths, sewerage treatment plants, hospitals, explosive magazines and more.

Special precautions must be taken for the design, manufacture, installation and use of equipment and cable glands in such hazardous areas. Persons involved in selecting installing and maintaining electrical equipment for use in hazardous areas should be competently trained, have a full understanding of what a hazardous area is and have knowledge of the equipment protection levels and the installation standards involved.


Additional Technical Data on CCG Posi Grip Compression Cable Gland (0545) Part Numbers can be found on the table below. For Conforming Standards & Certificates as well as Fitting Instructions, please advise PDF File.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Product Code Gland Size Ref. Metric Entry Thread (C) Metric Entry Thread (Min D) Cable Detail (Min B) Cable Detail (Max B) Max Length (E) Hexagonal Detail (Max Flats) Hexagonal Detail (Max Crns) Installation Torque Value (Nm)
054500 00-20ss M20x1.5 15 3 8.5 42 30 33.8 14
0545-0 0-20s M20x1.5 15 7 12 42 30 33.8 14
054501 1-20 M20x1.5 15 9 15 46 34 38.3 14
054502 2-25 M25x1.5 15 14 20 51 42 47.3 20
054503 3-32 M32x1.5 15 19 26.5 60 52 58.5 27
054504 4-40 M40x1.5 15 26 34 65 62 69.8 34
054505 5-50 M50x1.5 15 34 44.5 75 74 83.3 40
054506 6-63 M63x1.5 15 44 56.5 107 95 106.9 40
054507 7-75 M75x1.5 15 56 67.5 107 111 124.9 40
054508 8-80 M80x2.0 20 65 74 128 117 131.6 40
054509 9-90 M90x2.0 20 74 81.5 133 130 146.3 40
054510 10-100 M100x2.0 20 81 91 170 140 157.5 50
054511 11-110 M110x2.0 20 86 98 170 150 168.8 50

All dimensions are in mm. *Only CCG Posi Spanner to be used for installation torque.

 

Find out more about our products or becoming a supplier