Elpress Punch and Matrix for crimping Cu and Al with V1470

Product overview

Elpress Accessories (Punch and Matrix) for crimping Al with Elpress V1470. Elpress W60M, W60D

Elpress Accessories for Crimping Al

Punch and Matrix for Indent Crimping

Use Matrix Holder V1471. When Crimping Al Terminals, two crimps are always required.

Stranded Al Matrix  Punch  No of
Crimps
Matrix
Holder
Punch
Holder
800-1000 mm2 W60M W60D 2 Required Not Required
1200 mm2 W70M W70D 2 Required Not Required

General Information

SYSTEM ELPRESS
System Elpress consists of Terminals and Tools that are designed and tested together to give a certified crimping result. This ensures that users will feel confident when using our systems, and that a secure connection is achieved through the proper handling of our products.

HYDRAULIC CRIMP SYSTEMS
Elpress hydraulic crimp systems fit Elpress terminals and connectors from 10 to 1200 mm². The systems consist of pumps and crimp heads that can be freely combined or with complete hand-held tools, where these functions are intergrated. Wide range of accessories available for crimping, prerounding of sectorised conductors, cable cutting, etc. Together with the matching terminals the complete crimping system is formed. Both pumps and hand tools, with a few exceptions, have a quick feed function. This means that crimping can begin after a few pump strokes and after the dies have been brought in contact with the terminal. The systems also have a built-in ratchet lock, which ensures that an initial crimp is completed and thus produces the best possible results. Pumps that can be connected to a variety of different crimp heads offer versatility and provide maximum comfort and flexibility when working in tight spaces and demanding areas.

For more information on Elpress Accessories (Punch and Matrix) for crimping Al with V1470 (Elpress W60M, W70M, W60D, W70D), consult PDF File or Technical Data Table below.  elpress TP13M

*Technical Data subject to change without notice.

FREE Technical Advisory Service
E-Tech Components UK Ltd maintains a free technical advisory service.
Contact us for enquiries concerning this and all other products: +44 (0) 1744 762 929

Technical Data

Punch and Matrix for Indent Crimping

Use Matrix Holder V1471. When Crimping Al Terminals, two crimps are always required.

Stranded Al Matrix  Punch  No of
Crimps
Matrix
Holder
Punch
Holder
800-1000 mm2 W60M W60D 2 Required Not Required
1200 mm2 W70M W70D 2 Required Not Required

Technical Information

  • Image 1: Matrix Holder V1471 + Matrix W60M + Punch W60D.
  • Image 2: Crimp sequence.
Elpress-Crimp-Sequence

Find out more about our products or becoming a supplier